Daily Papers

While vision-language-action (VLA) models have advanced rapidly, running them at every control step remains expensive. Prior work accelerates VLA inference using techniques like action chunking and visual-token pruning, typically evaluating based on latency and average task success. However, acceleration may discard information and break tasks the original policy would solve, a risk hidden by average metrics. Measuring these failures is challenging because action deviations compound over closed-loop trajectories, meaning task failure is only observable across full episodes. We therefore define an acceleration-induced failure via paired rollouts from identical initial conditions, tracking when the reference succeeds but the accelerated policy fails. To manage this, we introduce CARE, an approach for certified accelerator selection. CARE uses paired rollouts on a calibration set to provide finite-sample guarantees that acceleration-induced failure risk stays below a user-specified budget. It deploys the fastest certified candidate, falling back to the reference if none qualify. By relying only on terminal outcomes and measured compute, CARE applies unchanged across diverse acceleration mechanisms, while sequential testing and failure-triggered reference rollouts keep certification affordable. On four LIBERO suites with OpenVLA-OFT, CARE certifies 9.0--10.8times speedups while guaranteeing (at 95% confidence) that at least 85.8% of reference-solved episodes are preserved. Under tight budgets, selectors without guarantees exceed the budget in up to 75% of trials, whereas CARE stays within budget and its sequential form uses 78.9% fewer rollouts than exhaustive evaluation. CARE further generalizes to flow-step reduction for π_{0.5}, and to Qwen3.5-9B and Llama-3.1-8B agents in Crafter.

Vision-language-action (VLA) models face a timing gap between low-rate inference and high-rate robot execution. We characterize this gap through end-to-end latency measurements of model inference and the robot execution chain. Repeated Flow Matching denoising contributes substantially to inference cost, while robot-side delays mainly arise from perception acquisition, communication scheduling, and physical response. Analysis of the velocity field shows relatively stable magnitude and direction in early integration, followed by stronger directional correction near the terminal steps. Based on this stage heterogeneity, we propose two-stage non-uniform denoising, reducing the number of steps from 10 to 2 and model-inference time from 61.557 ms to 21.956 ms. We also develop a distributed real-time VLA framework with independent inference, action-publication, and robot-control rates, modular observation acquisition, and action-provenance logging. Using π0.5 as the baseline, we evaluate six real-time execution methods on a long-horizon physical garment-folding task. Legato performs best overall among training-based methods, while Temporal Smoothing leads among training-free methods; both perform strongly in task success, completion time, action continuity, and acceleration smoothness. Combining two-step denoising with representative execution methods substantially reduces inference cost with a small reduction in task performance. These results motivate joint optimization of model-inference efficiency and robot-system timing.

While large-scale text-to-image generative models have achieved unprecedented visual performance, their inherent reliance on multi-step iterative solvers incurs severe inference latency. Few-step distillation targeting the Classifier-Free Guidance (CFG) trajectory has emerged as the prevalent dual-dimensional compression paradigm. However, existing frameworks remain subjugated by a coarse-grained blind injection paradigm that perpetually enforces a globally static guidance strength while indiscriminately sampling the supervisor timestep. This state-agnostic design completely disregards the intrinsic nature of image generation as a dynamic evolutionary process characterized by progressive entropy reduction, which not only restricts the performance boundary of few-step compression but also precipitates severe CFG over-conditioning artifacts. To transcend these limitations, we re-examine the distillation procedure through the theoretical lens of Information Theory, formally modeling it as a dynamic mutual information game constrained by the Information Bottleneck (IB) principle. Specifically, we dismantle traditional blind assumptions via a dual-track adaptive framework. To determine the injection target, we propose an instance-aware selection mechanism that transmutes the intractable KL divergence constraint into a zero-overhead closed-form solution predicated on the local vector field norm. To regulate the injection strength, we introduce an entropy-aware schedule that dynamically decays alongside the SNR, applying maximal thrust for initial structural anchoring before smoothly reverting to the natural manifold to refine micro-details. Extensive empirical evaluations corroborate that our framework fundamentally eradicates over-conditioning artifacts, shattering the performance ceiling to achieve SOTA generative fidelity under extremely stringent 2-step configurations.

Diffusion models excel in high-quality generation but suffer from slow inference due to iterative sampling. While recent methods have successfully transformed diffusion models into one-step generators, they neglect model size reduction, limiting their applicability in compute-constrained scenarios. This paper aims to develop small, efficient one-step diffusion models based on the powerful rectified flow framework, by exploring joint compression of inference steps and model size. The rectified flow framework trains one-step generative models using two operations, reflow and distillation. Compared with the original framework, squeezing the model size brings two new challenges: (1) the initialization mismatch between large teachers and small students during reflow; (2) the underperformance of naive distillation on small student models. To overcome these issues, we propose Annealing Reflow and Flow-Guided Distillation, which together comprise our SlimFlow framework. With our novel framework, we train a one-step diffusion model with an FID of 5.02 and 15.7M parameters, outperforming the previous state-of-the-art one-step diffusion model (FID=6.47, 19.4M parameters) on CIFAR10. On ImageNet 64times64 and FFHQ 64times64, our method yields small one-step diffusion models that are comparable to larger models, showcasing the effectiveness of our method in creating compact, efficient one-step diffusion models.

One-step generative modeling has emerged as a leading approach for amortizing the inference cost of diffusion and flow-matching models. Among distillation-free methods, MeanFlow training is notoriously unstable, with non-decreasing loss and unbounded gradient variance. In this work, we establish a theory that attributes this pathology to a misuse of the conditional velocity field. We show that the conditional velocity plays two distinct statistical roles in the loss: both as an unbiased regression target and as a Monte Carlo control variate in a Jacobi-vector product, with the original MeanFlow loss assigning the wrong coefficient to the latter. We derive the optimal coefficient in closed form and show that a family of fixes in concurrent works corresponds to different practical realizations of the same optimum. A controlled sweep of this coefficient on two-dimensional benchmarks and on a latent Diffusion Transformer recovers the predicted bias-variance ordering. Our DiT experiment also reveals a quantitative FID-MSE landscape mismatch. Specifically, although the gradient-MSE is minimized at an interior coefficient value near β!=!0.94, the coefficient that minimizes FID prefers to use conditional velocity directly at the unbiased corner. Our analysis therefore explains why MeanFlow is unstable and unifies its concurrent remedies, and shows that the variance-optimal coefficient need not coincide with the quality-optimal one.

Hardware-agnostic strategies for accelerating text-to-image diffusion, such as timestep distillation and feature caching, can reduce inference time without custom kernels or system-level optimization. Among them, multi-resolution generation strategies have recently received broad attention, attaining more than 5x speedup without any training. However, the design of performing upsampling in the latent space, together with the selective modification of partial regions, causes these methods to exhibit noticeable blurring or artifacts. To this end, we propose MrFlow, a training-free multi-resolution acceleration strategy for pretrained flow-matching models built upon a staged low-to-high-resolution pipeline. MrFlow first rapidly generates the main structure at low resolution, then performs super-resolution in the pixel space using a lightweight pretrained GAN-based model, subsequently injects low-strength noise to enable high-frequency resampling, and finally refines the details at high resolution. Quantitative and qualitative results on FLUX.1-dev and Qwen-Image show that MrFlow exploits the quadratic token reduction and reduced step requirement of low-resolution sampling to achieve 10x end-to-end acceleration while keeping OneIG within a 1% gap relative to that before acceleration, significantly surpassing other training-free acceleration strategies, and requiring no training or runtime dynamic identification whatsoever. MrFlow can further be directly combined orthogonally with pre-trained timestep distillation strategies, achieving even higher generation acceleration of up to 25x.

Control Flow Attestation (CFA) allows remote verification of run-time software integrity in embedded systems. However, CFA is limited by the storage/transmission costs of generated control flow logs (CFlog). Recent work has proposed application-specific optimizations by speculating on likely sub-paths in CFlog and replacing them with reserved symbols at runtime. Albeit effective, prior approaches do not consider the representation of addresses in a control flow path for speculation. This work proposes RESPEC-CFA, an architectural extension for CFA allowing for speculation on (1) the locality of control flows and (2) their Huffman encoding. Alone, RESPEC-CFA reduces CFlog sizes by up to 90.1%. Combined with prior methods, RESPEC-CFA yields reductions of up to 99.7%, representing a significant step toward practical CFA.

Flow Matching (FM) has recently emerged as a principled and efficient alternative to diffusion models. Standard FM encourages the learned velocity field to follow a target direction; however, it may accumulate errors along the trajectory and drive samples off the data manifold, leading to perceptual degradation, especially in lightweight or low-step configurations. To enhance stability and generalization, we extend FM into a balanced attract-repel scheme that provides explicit guidance on both "where to go" and "where not to go." To be formal, we propose Velocity Contrastive Regularization (VeCoR), a complementary training scheme for flow-based generative modeling that augments the standard FM objective with contrastive, two-sided supervision. VeCoR not only aligns the predicted velocity with a stable reference direction (positive supervision) but also pushes it away from inconsistent, off-manifold directions (negative supervision). This contrastive formulation transforms FM from a purely attractive, one-sided objective into a two-sided training signal, regularizing trajectory evolution and improving perceptual fidelity across datasets and backbones. On ImageNet-1K 256times256, VeCoR yields 22\% and 35\% relative FID reductions on SiT-XL/2 and REPA-SiT-XL/2 backbones, respectively, and achieves further FID gains (32\% relative) on MS-COCO text-to-image generation, demonstrating consistent improvements in stability, convergence, and image quality, particularly in low-step and lightweight settings. Project page: https://p458732.github.io/VeCoR_Project_Page/

Flow matching is a powerful framework for generating high-quality samples in various applications, especially image synthesis. However, the intensive computational demands of these models, especially during the fine-tuning process and sampling processes, pose significant challenges for low-resource scenarios. This paper introduces Bellman Optimal Step-size Straightening (BOSS) technique for distilling flow-matching generative models: it aims specifically for a few-step efficient image sampling while adhering to a computational budget constraint. First, this technique involves a dynamic programming algorithm that optimizes the step sizes of the pretrained network. Then, it refines the velocity network to match the optimal step sizes, aiming to straighten the generation paths. Extensive experimental evaluations across image generation tasks demonstrate the efficacy of BOSS in terms of both resource utilization and image quality. Our results reveal that BOSS achieves substantial gains in efficiency while maintaining competitive sample quality, effectively bridging the gap between low-resource constraints and the demanding requirements of flow-matching generative models. Our paper also fortifies the responsible development of artificial intelligence, offering a more sustainable generative model that reduces computational costs and environmental footprints. Our code can be found at https://github.com/nguyenngocbaocmt02/BOSS.

We present Piecewise Rectified Flow (PeRFlow), a flow-based method for accelerating diffusion models. PeRFlow divides the sampling process of generative flows into several time windows and straightens the trajectories in each interval via the reflow operation, thereby approaching piecewise linear flows. PeRFlow achieves superior performance in a few-step generation. Moreover, through dedicated parameterizations, the obtained PeRFlow models show advantageous transfer ability, serving as universal plug-and-play accelerators that are compatible with various workflows based on the pre-trained diffusion models. The implementations of training and inference are fully open-sourced. https://github.com/magic-research/piecewise-rectified-flow

Vision-Language-Action (VLA) models based on flow matching -- such as pi0, pi0.5, and SmolVLA -- achieve state-of-the-art generalist robotic manipulation, yet their iterative denoising, typically 10 ODE steps, introduces substantial latency: on a modern GPU, denoising alone accounts for 80% of end-to-end inference time. Naively reducing the step count is unreliable, degrading success on most tasks due to the velocity field being uncalibrated for single-step jumps. We present SnapFlow, a plug-and-play self-distillation method that compresses multi-step denoising into a single forward pass (1-NFE) for flow-matching VLAs. SnapFlow mixes standard flow-matching samples with consistency samples whose targets are two-step Euler shortcut velocities computed from the model's own marginal velocity predictions, avoiding the trajectory drift caused by conditional velocities, as we analyze theoretically. A zero-initialized target-time embedding lets the network switch between local velocity estimation and global one-step generation within a single architecture. SnapFlow requires no external teacher, no architecture changes, and trains in ~12h on a single GPU. We validate on two VLA architectures spanning a 6x parameter range, with identical hyperparameters: on pi0.5 (3B) across four LIBERO suites (40 tasks, 400 episodes), SnapFlow achieves 98.75% average success -- matching the 10-step teacher at 97.75% and slightly exceeding it -- with 9.6x denoising speedup and end-to-end latency reduced from 274ms to 83ms; on SmolVLA (500M), it reduces MSE by 8.3% with 3.56x end-to-end acceleration. An action-step sweep on long-horizon tasks reveals that SnapFlow maintains its advantage across execution horizons, achieving 93% at n_act=5 where the baseline reaches only 90%. SnapFlow is orthogonal to layer-distillation and token-pruning approaches, enabling compositional speedups.

We present an ultra-efficient post-training method for shortcutting large-scale pre-trained flow matching diffusion models into efficient few-step samplers, enabled by novel velocity field self-distillation. While shortcutting in flow matching, originally introduced by shortcut models, offers flexible trajectory-skipping capabilities, it requires a specialized step-size embedding incompatible with existing models unless retraining from scratchx2013a process nearly as costly as pretraining itself. Our key contribution is thus imparting a more aggressive shortcut mechanism to standard flow matching models (e.g., Flux), leveraging a unique distillation principle that obviates the need for step-size embedding. Working on the velocity field rather than sample space and learning rapidly from self-guided distillation in an online manner, our approach trains efficiently, e.g., producing a 3-step Flux less than one A100 day. Beyond distillation, our method can be incorporated into the pretraining stage itself, yielding models that inherently learn efficient, few-step flows without compromising quality. This capability also enables, to our knowledge, the first few-shot distillation method (e.g., 10 text-image pairs) for dozen-billion-parameter diffusion models, delivering state-of-the-art performance at almost free cost.

The multi-step denoising process in diffusion and Flow Matching models causes major efficiency issues, which motivates research on few-step generation. We present Solution Flow Models (SoFlow), a framework for one-step generation from scratch. By analyzing the relationship between the velocity function and the solution function of the velocity ordinary differential equation (ODE), we propose a Flow Matching loss and a solution consistency loss to train our models. The Flow Matching loss allows our models to provide estimated velocity fields for Classifier-Free Guidance (CFG) during training, which improves generation performance. Notably, our consistency loss does not require the calculation of the Jacobian-vector product (JVP), a common requirement in recent works that is not well-optimized in deep learning frameworks like PyTorch. Experimental results indicate that, when trained from scratch using the same Diffusion Transformer (DiT) architecture and an equal number of training epochs, our models achieve better FID-50K scores than MeanFlow models on the ImageNet 256x256 dataset.

Flow-based policies provide an expressive framework for continuous robot control, but their iterative ODE integration incurs substantial inference cost. Naively reducing the integration budget can severely degrade control, since policies optimized under full-step execution are not explicitly constrained to remain reliable under coarse numerical integration. We refer to this mismatch as the few-step discretization gap. To address this problem, we introduce RFPO, a flow-policy optimization framework for reliable few-step execution. Reward-aware online Reflow rectifies student-induced transport paths during on-policy learning, making the resulting policy more robust to coarse integration. A frozen Gaussian PPO controller supplies complementary action-space supervision at full and intermediate integration budgets, while the deployed policy remains a single flow student executed with one Euler step. Across Unitree Go2, Boston Dynamics Spot, Unitree H1, and Unitree G1, RFPO consistently preserves full-step control performance under one-step execution, with one-step returns remaining within 2.4% of their corresponding 64-step values across both zero and random initialization. On Unitree Go2, one-step execution retains 98.5% of the 64-step reward while reducing onboard mean inference latency from 4.39 ms to 0.08 ms, yielding a 54.9x speedup. Real-robot experiments further validate stable one-step locomotion. Code: https://github.com/AIGeeksGroup/RFPO. Website: https://aigeeksgroup.github.io/RFPO.

Flow-based generative models have recently demonstrated strong performance, yet sampling typically relies on expensive numerical integration of ordinary differential equations (ODEs). Rectified Flow enables one-step sampling by learning nearly straight probability paths, but achieving such straightness requires multiple computationally intensive reflow iterations. MeanFlow achieves one-step generation by directly modeling the average velocity over time; however, when trained on highly curved flows, it suffers from slow convergence and noisy supervision. To address these limitations, we propose Rectified MeanFlow, a framework that models the mean velocity field along the rectified trajectory using only a single reflow step. This eliminates the need for perfectly straightened trajectories while enabling efficient training. Furthermore, we introduce a simple yet effective truncation heuristic that aims to reduce residual curvature and further improve performance. Extensive experiments on ImageNet at 64, 256, and 512 resolutions show that Re-MeanFlow consistently outperforms prior one-step flow distillation and Rectified Flow methods in both sample quality and training efficiency. Code is available at https://github.com/Xinxi-Zhang/Re-MeanFlow.

Flow matching has emerged as a scalable paradigm for training high-quality generative models, but sampling from the learned probability flow requires many network evaluations. Distillation can reduce this cost to one or a few evaluations; however, one-step generation often sacrifices quality, making few-step generation the practical operating regime. Existing few-step methods perform their iterative computation along the probability flow and therefore require a fixed, manually chosen timestep discretization. This discretization is often chosen heuristically and is expensive to tune; it may also be restrictive when refinement difficulty differs across samples or spatial locations. We introduce data-space iteration, a few-step generation framework that removes flow discretization altogether. Starting from noise, a shared generator directly refines its prediction in data space, with every iteration trained to produce the best sample permitted by its capacity. Our formulation integrates with distribution matching distillation (DMD) with minimal changes, enabling a controlled comparison between iteration methods under matched training settings. On class-conditional ImageNet 256x256, data-space iteration outperforms standard discretization baselines and matches or improves upon variants selected through schedule search, without requiring schedule-specific training. These results show that data-space iteration provides a simple and effective alternative to discretized flow-space iteration for fast generation.

Diffusion models have greatly improved visual generation but are hindered by slow generation speed due to the computationally intensive nature of solving generative ODEs. Rectified flow, a widely recognized solution, improves generation speed by straightening the ODE path. Its key components include: 1) using the diffusion form of flow-matching, 2) employing boldsymbol v-prediction, and 3) performing rectification (a.k.a. reflow). In this paper, we argue that the success of rectification primarily lies in using a pretrained diffusion model to obtain matched pairs of noise and samples, followed by retraining with these matched noise-sample pairs. Based on this, components 1) and 2) are unnecessary. Furthermore, we highlight that straightness is not an essential training target for rectification; rather, it is a specific case of flow-matching models. The more critical training target is to achieve a first-order approximate ODE path, which is inherently curved for models like DDPM and Sub-VP. Building on this insight, we propose Rectified Diffusion, which generalizes the design space and application scope of rectification to encompass the broader category of diffusion models, rather than being restricted to flow-matching models. We validate our method on Stable Diffusion v1-5 and Stable Diffusion XL. Our method not only greatly simplifies the training procedure of rectified flow-based previous works (e.g., InstaFlow) but also achieves superior performance with even lower training cost. Our code is available at https://github.com/G-U-N/Rectified-Diffusion.

Rectified flow and reflow procedures have significantly advanced fast generation by progressively straightening ordinary differential equation (ODE) flows. They operate under the assumption that image and noise pairs, known as couplings, can be approximated by straight trajectories with constant velocity. However, we observe that modeling with constant velocity and using reflow procedures have limitations in accurately learning straight trajectories between pairs, resulting in suboptimal performance in few-step generation. To address these limitations, we introduce Constant Acceleration Flow (CAF), a novel framework based on a simple constant acceleration equation. CAF introduces acceleration as an additional learnable variable, allowing for more expressive and accurate estimation of the ODE flow. Moreover, we propose two techniques to further improve estimation accuracy: initial velocity conditioning for the acceleration model and a reflow process for the initial velocity. Our comprehensive studies on toy datasets, CIFAR-10, and ImageNet 64x64 demonstrate that CAF outperforms state-of-the-art baselines for one-step generation. We also show that CAF dramatically improves few-step coupling preservation and inversion over Rectified flow. Code is available at https://github.com/mlvlab/CAF{https://github.com/mlvlab/CAF}.

Few-step diffusion or flow-based generative models typically distill a velocity-predicting teacher into a student that predicts a shortcut towards denoised data. This format mismatch has led to complex distillation procedures that often suffer from a quality-diversity trade-off. To address this, we propose policy-based flow models (pi-Flow). pi-Flow modifies the output layer of a student flow model to predict a network-free policy at one timestep. The policy then produces dynamic flow velocities at future substeps with negligible overhead, enabling fast and accurate ODE integration on these substeps without extra network evaluations. To match the policy's ODE trajectory to the teacher's, we introduce a novel imitation distillation approach, which matches the policy's velocity to the teacher's along the policy's trajectory using a standard ell_2 flow matching loss. By simply mimicking the teacher's behavior, pi-Flow enables stable and scalable training and avoids the quality-diversity trade-off. On ImageNet 256^2, it attains a 1-NFE FID of 2.85, outperforming MeanFlow of the same DiT architecture. On FLUX.1-12B and Qwen-Image-20B at 4 NFEs, pi-Flow achieves substantially better diversity than state-of-the-art few-step methods, while maintaining teacher-level quality.

The remarkable success of diffusion and flow-matching models has ignited a surge of works on adapting them at test time for controlled generation tasks. Examples range from image editing to restoration, compression and personalization. However, due to the iterative nature of the sampling process in those models, it is computationally impractical to use gradient-based optimization to directly control the image generated at the end of the process. As a result, existing methods typically resort to manipulating each timestep separately. Here we introduce FlowOpt - a zero-order (gradient-free) optimization framework that treats the entire flow process as a black box, enabling optimization through the whole sampling path without backpropagation through the model. Our method is both highly efficient and allows users to monitor the intermediate optimization results and perform early stopping if desired. We prove a sufficient condition on FlowOpt's step-size, under which convergence to the global optimum is guaranteed. We further show how to empirically estimate this upper bound so as to choose an appropriate step-size. We demonstrate how FlowOpt can be used for image editing, showcasing two options: (i) inversion (determining the initial noise that generates a given image), and (ii) directly steering the edited image to be similar to the source image while conforming to a target text prompt. In both cases, FlowOpt achieves state-of-the-art results while using roughly the same number of neural function evaluations (NFEs) as existing methods. Code and examples are available on the project's webpage.

Diffusion models have revolutionized text-to-image generation with its exceptional quality and creativity. However, its multi-step sampling process is known to be slow, often requiring tens of inference steps to obtain satisfactory results. Previous attempts to improve its sampling speed and reduce computational costs through distillation have been unsuccessful in achieving a functional one-step model. In this paper, we explore a recent method called Rectified Flow, which, thus far, has only been applied to small datasets. The core of Rectified Flow lies in its reflow procedure, which straightens the trajectories of probability flows, refines the coupling between noises and images, and facilitates the distillation process with student models. We propose a novel text-conditioned pipeline to turn Stable Diffusion (SD) into an ultra-fast one-step model, in which we find reflow plays a critical role in improving the assignment between noise and images. Leveraging our new pipeline, we create, to the best of our knowledge, the first one-step diffusion-based text-to-image generator with SD-level image quality, achieving an FID (Frechet Inception Distance) of 23.3 on MS COCO 2017-5k, surpassing the previous state-of-the-art technique, progressive distillation, by a significant margin (37.2 rightarrow 23.3 in FID). By utilizing an expanded network with 1.7B parameters, we further improve the FID to 22.4. We call our one-step models InstaFlow. On MS COCO 2014-30k, InstaFlow yields an FID of 13.1 in just 0.09 second, the best in leq 0.1 second regime, outperforming the recent StyleGAN-T (13.9 in 0.1 second). Notably, the training of InstaFlow only costs 199 A100 GPU days. Project page:~https://github.com/gnobitab/InstaFlow.

Flow matching (FM) is a family of training algorithms for fitting continuous normalizing flows (CNFs). Conditional flow matching (CFM) exploits the fact that the marginal vector field of a CNF can be learned by fitting least-squares regression to the conditional vector field specified given one or both ends of the flow path. In this paper, we extend the CFM algorithm by defining conditional probability paths along ``streams'', instances of latent stochastic paths that connect data pairs of source and target, which are modeled with Gaussian process (GP) distributions. The unique distributional properties of GPs help preserve the ``simulation-free" nature of CFM training. We show that this generalization of the CFM can effectively reduce the variance in the estimated marginal vector field at a moderate computational cost, thereby improving the quality of the generated samples under common metrics. Additionally, adopting the GP on the streams allows for flexibly linking multiple correlated training data points (e.g., time series). We empirically validate our claim through both simulations and applications to image and neural time series data.

Self-conditioning is a core technique that enhances continuous flow-based language models, where the model learns to denoise generated text by conditioning on its own denoising estimate. While empirically successful, its performance improvements are poorly understood. Moreover, there is growing interest in the use of few-step generators based on flow maps, for which how to leverage self-conditioning is unclear. Here, we show that flow language models with self-conditioning solve a fixed-point iteration that bootstraps the performance of the learned denoiser. We use this viewpoint to formulate fixed-point flows, a two-dimensional class of self-conditioned flows, where the first dimension represents the flow process and the second represents the fixed-point iteration. We show that fixed-point flows define valid flow maps, and show that they can be distilled from self-conditioned flow models by compressing both fixed-point iterations and the flow process, the former with fixed-point distillation and the latter with flow map distillation. Our resulting flow map language model, FMLM^star, outperforms state-of-the-art self-conditioned models and few-step models in one- and few-step generation on OpenWebText. Code is available at https://github.com/Ugness/self-conditioned-fmlm.

Classifier-Free Guidance (CFG) is a widely adopted technique in diffusion/flow models to improve image fidelity and controllability. In this work, we first analytically study the effect of CFG on flow matching models trained on Gaussian mixtures where the ground-truth flow can be derived. We observe that in the early stages of training, when the flow estimation is inaccurate, CFG directs samples toward incorrect trajectories. Building on this observation, we propose CFG-Zero*, an improved CFG with two contributions: (a) optimized scale, where a scalar is optimized to correct for the inaccuracies in the estimated velocity, hence the * in the name; and (b) zero-init, which involves zeroing out the first few steps of the ODE solver. Experiments on both text-to-image (Lumina-Next, Stable Diffusion 3, and Flux) and text-to-video (Wan-2.1) generation demonstrate that CFG-Zero* consistently outperforms CFG, highlighting its effectiveness in guiding Flow Matching models. (Code is available at github.com/WeichenFan/CFG-Zero-star)

Diffusion models have demonstrated remarkable generation quality but at the cost of numerous function evaluations. Recently, advanced ODE-based solvers have been developed to mitigate the substantial computational demands of reverse-diffusion solving under limited sampling steps. However, these solvers, heavily inspired by Adams-like multistep methods, rely solely on t-related Lagrange interpolation. We show that t-related Lagrange interpolation is suboptimal for diffusion model and reveal a compact search space comprised of time steps and solver coefficients. Building on our analysis, we propose a novel differentiable solver search algorithm to identify more optimal solver. Equipped with the searched solver, rectified-flow models, e.g., SiT-XL/2 and FlowDCN-XL/2, achieve FID scores of 2.40 and 2.35, respectively, on ImageNet256 with only 10 steps. Meanwhile, DDPM model, DiT-XL/2, reaches a FID score of 2.33 with only 10 steps. Notably, our searched solver outperforms traditional solvers by a significant margin. Moreover, our searched solver demonstrates generality across various model architectures, resolutions, and model sizes.

Numerical simulations in industrial applications often require performing numerous high-precision computations parameterized by specific experimental conditions. For instance, in vehicle body design, aerodynamic simulations are essential for evaluating the aerodynamic characteristics of various proposed body geometries. However, computational resource constraints often become a bottleneck. Therefore, achieving the desired accuracy while minimizing computational cost is crucial. To address this challenge, model reduction methods have been developed to decrease the degrees of freedom by constraining the possible states of a physical system to a lower-dimensional subspace. In particular, reduction techniques that project the system onto a nonlinear subspace using neural networks have been actively studied. Our previous research developed a reduced-order model that integrates neural-network-based model reduction with a time-evolution method, implemented as a distributed parallel training framework to process high-resolution flow field data efficiently. In this study, we extend this reduction approach by incorporating a variational autoencoder to assess its robustness in high-Reynolds-number flows around multiple vehicle bodies with varying geometries. Specifically, we evaluate the reconstruction accuracy of vortex generation across different spatial and temporal scales using a compact latent representation, with a particular focus on the flow behavior near the rear end of the vehicle body.

We present AdvantageFlow, a forward-process reinforcement learning (RL) algorithm for rectified flow models. The algorithm minimizes an advantage-weighted prediction loss, which maximizes reward, regularized by the rollout policy, which convexifies the objective and makes its optimization stable. Our objective can be viewed as fitting a local reward-improving target distribution. The rollout regularization arises as a variance reduction step. We evaluate AdvantageFlow empirically on text-to-image generation with Stable Diffusion 3.5 Medium and FLUX.1, and compare it to both forward- and reverse-process RL algorithms.

Diffusion models have achieved significant progress in both image and video generation while still suffering from huge computation costs. As an effective solution, flow matching aims to reflow the diffusion process of diffusion models into a straight line for a few-step and even one-step generation. However, in this paper, we suggest that the original training pipeline of flow matching is not optimal and introduce two techniques to improve it. Firstly, we introduce progressive reflow, which progressively reflows the diffusion models in local timesteps until the whole diffusion progresses, reducing the difficulty of flow matching. Second, we introduce aligned v-prediction, which highlights the importance of direction matching in flow matching over magnitude matching. Experimental results on SDv1.5 and SDXL demonstrate the effectiveness of our method, for example, conducting on SDv1.5 achieves an FID of 10.70 on MSCOCO2014 validation set with only 4 sampling steps, close to our teacher model (32 DDIM steps, FID = 10.05).

Diffusion models achieve remarkable generation quality but suffer from computational intensive sampling due to suboptimal step discretization. While existing works focus on optimizing denoising directions, we address the principled design of stepsize schedules. This paper proposes Optimal Stepsize Distillation, a dynamic programming framework that extracts theoretically optimal schedules by distilling knowledge from reference trajectories. By reformulating stepsize optimization as recursive error minimization, our method guarantees global discretization bounds through optimal substructure exploitation. Crucially, the distilled schedules demonstrate strong robustness across architectures, ODE solvers, and noise schedules. Experiments show 10x accelerated text-to-image generation while preserving 99.4% performance on GenEval. Our code is available at https://github.com/bebebe666/OptimalSteps.

Flow-matching models generate samples through iterative velocity predictions, but typically do not revisit these predictions using the intermediate representations that produced them. We introduce CorrFlow, a self-correcting flow-matching framework that reuses this information through a lightweight refiner. Under rectified-flow interpolation, the error of the one-step clean prediction equals the realized velocity residual scaled by the noise level. Motivated by this identity, the refiner learns to predict residual corrections from the base model's clean prediction, conditioning, noise level and hidden states from the same forward pass. The correction is added to the base velocity before each sampling update, so subsequent predictions are made from the corrected state. This requires no additional base-model evaluations and only one lightweight refiner evaluation per step. Our theoretical analyses establish conditions under which feature reuse outperforms raw-input affine predictors and refiner training achieves greater residual-risk reduction than continued base-model training under a matched training compute budget. Experiments on class-conditional image generation, text-to-video generation and image-to-video generation show consistent improvements over the corresponding base models, including gains in visual quality and physical consistency. Project Page: https://fogradio.github.io/corrflow-project

Diffusion models have shown great promise for image and video generation, but sampling from state-of-the-art models requires expensive numerical integration of a generative ODE. One approach for tackling this problem is rectified flows, which iteratively learn smooth ODE paths that are less susceptible to truncation error. However, rectified flows still require a relatively large number of function evaluations (NFEs). In this work, we propose improved techniques for training rectified flows, allowing them to compete with knowledge distillation methods even in the low NFE setting. Our main insight is that under realistic settings, a single iteration of the Reflow algorithm for training rectified flows is sufficient to learn nearly straight trajectories; hence, the current practice of using multiple Reflow iterations is unnecessary. We thus propose techniques to improve one-round training of rectified flows, including a U-shaped timestep distribution and LPIPS-Huber premetric. With these techniques, we improve the FID of the previous 2-rectified flow by up to 72% in the 1 NFE setting on CIFAR-10. On ImageNet 64times64, our improved rectified flow outperforms the state-of-the-art distillation methods such as consistency distillation and progressive distillation in both one-step and two-step settings and rivals the performance of improved consistency training (iCT) in FID. Code is available at https://github.com/sangyun884/rfpp.

Flow-based 3D generation models typically require dozens of sampling steps during inference. Though few-step distillation methods, particularly Consistency Models (CMs), have achieved substantial advancements in accelerating 2D diffusion models, they remain under-explored for more complex 3D generation tasks. In this study, we propose a novel framework, MDT-dist, for few-step 3D flow distillation. Our approach is built upon a primary objective: distilling the pretrained model to learn the Marginal-Data Transport. Directly learning this objective needs to integrate the velocity fields, while this integral is intractable to be implemented. Therefore, we propose two optimizable objectives, Velocity Matching (VM) and Velocity Distillation (VD), to equivalently convert the optimization target from the transport level to the velocity and the distribution level respectively. Velocity Matching (VM) learns to stably match the velocity fields between the student and the teacher, but inevitably provides biased gradient estimates. Velocity Distillation (VD) further enhances the optimization process by leveraging the learned velocity fields to perform probability density distillation. When evaluated on the pioneer 3D generation framework TRELLIS, our method reduces sampling steps of each flow transformer from 25 to 1 or 2, achieving 0.68s (1 step x 2) and 0.94s (2 steps x 2) latency with 9.0x and 6.5x speedup on A800, while preserving high visual and geometric fidelity. Extensive experiments demonstrate that our method significantly outperforms existing CM distillation methods, and enables TRELLIS to achieve superior performance in few-step 3D generation.

Diffusion models are emerging expressive generative models, in which a large number of time steps (inference steps) are required for a single image generation. To accelerate such tedious process, reducing steps uniformly is considered as an undisputed principle of diffusion models. We consider that such a uniform assumption is not the optimal solution in practice; i.e., we can find different optimal time steps for different models. Therefore, we propose to search the optimal time steps sequence and compressed model architecture in a unified framework to achieve effective image generation for diffusion models without any further training. Specifically, we first design a unified search space that consists of all possible time steps and various architectures. Then, a two stage evolutionary algorithm is introduced to find the optimal solution in the designed search space. To further accelerate the search process, we employ FID score between generated and real samples to estimate the performance of the sampled examples. As a result, the proposed method is (i).training-free, obtaining the optimal time steps and model architecture without any training process; (ii). orthogonal to most advanced diffusion samplers and can be integrated to gain better sample quality. (iii). generalized, where the searched time steps and architectures can be directly applied on different diffusion models with the same guidance scale. Experimental results show that our method achieves excellent performance by using only a few time steps, e.g. 17.86 FID score on ImageNet 64 times 64 with only four steps, compared to 138.66 with DDIM. The code is available at https://github.com/lilijiangg/AutoDiffusion.

Denoising generative models, such as diffusion and flow-based models, produce high-quality samples but require many denoising steps due to discretization error. Flow maps, which estimate the average velocity between timesteps, mitigate this error and enable faster sampling. However, their training typically demands architectural changes that limit compatibility with pretrained flow models. We introduce Decoupled MeanFlow, a simple decoding strategy that converts flow models into flow map models without architectural modifications. Our method conditions the final blocks of diffusion transformers on the subsequent timestep, allowing pretrained flow models to be directly repurposed as flow maps. Combined with enhanced training techniques, this design enables high-quality generation in as few as 1 to 4 steps. Notably, we find that training flow models and subsequently converting them is more efficient and effective than training flow maps from scratch. On ImageNet 256x256 and 512x512, our models attain 1-step FID of 2.16 and 2.12, respectively, surpassing prior art by a large margin. Furthermore, we achieve FID of 1.51 and 1.68 when increasing the steps to 4, which nearly matches the performance of flow models while delivering over 100x faster inference.

Flow-based generative models achieve state-of-the-art sample quality, but require the expensive solution of a differential equation at inference time. Flow map models, commonly known as consistency models, encompass many recent efforts to improve inference-time efficiency by learning the solution operator of this differential equation. Yet despite their promise, these models lack a unified description that clearly explains how to learn them efficiently in practice. Here, building on the methodology proposed in Boffi et. al. (2024), we present a systematic algorithmic framework for directly learning the flow map associated with a flow or diffusion model. By exploiting a relationship between the velocity field underlying a continuous-time flow and the instantaneous rate of change of the flow map, we show how to convert any distillation scheme into a direct training algorithm via self-distillation, eliminating the need for pre-trained teachers. We introduce three algorithmic families based on different mathematical characterizations of the flow map: Eulerian, Lagrangian, and Progressive methods, which we show encompass and extend all known distillation and direct training schemes for consistency models. We find that the novel class of Lagrangian methods, which avoid both spatial derivatives and bootstrapping from small steps by design, achieve significantly more stable training and higher performance than more standard Eulerian and Progressive schemes. Our methodology unifies existing training schemes under a single common framework and reveals new design principles for accelerated generative modeling. Associated code is available at https://github.com/nmboffi/flow-maps.

In this work, we propose WaveFlow, a small-footprint generative flow for raw audio, which is directly trained with maximum likelihood. It handles the long-range structure of 1-D waveform with a dilated 2-D convolutional architecture, while modeling the local variations using expressive autoregressive functions. WaveFlow provides a unified view of likelihood-based models for 1-D data, including WaveNet and WaveGlow as special cases. It generates high-fidelity speech as WaveNet, while synthesizing several orders of magnitude faster as it only requires a few sequential steps to generate very long waveforms with hundreds of thousands of time-steps. Furthermore, it can significantly reduce the likelihood gap that has existed between autoregressive models and flow-based models for efficient synthesis. Finally, our small-footprint WaveFlow has only 5.91M parameters, which is 15times smaller than WaveGlow. It can generate 22.05 kHz high-fidelity audio 42.6times faster than real-time (at a rate of 939.3 kHz) on a V100 GPU without engineered inference kernels.

Diffusion- and flow-based models have emerged as state-of-the-art generative modeling approaches, but they require many sampling steps. Consistency models can distill these models into efficient one-step generators; however, unlike flow- and diffusion-based methods, their performance inevitably degrades when increasing the number of steps, which we show both analytically and empirically. Flow maps generalize these approaches by connecting any two noise levels in a single step and remain effective across all step counts. In this paper, we introduce two new continuous-time objectives for training flow maps, along with additional novel training techniques, generalizing existing consistency and flow matching objectives. We further demonstrate that autoguidance can improve performance, using a low-quality model for guidance during distillation, and an additional boost can be achieved by adversarial finetuning, with minimal loss in sample diversity. We extensively validate our flow map models, called Align Your Flow, on challenging image generation benchmarks and achieve state-of-the-art few-step generation performance on both ImageNet 64x64 and 512x512, using small and efficient neural networks. Finally, we show text-to-image flow map models that outperform all existing non-adversarially trained few-step samplers in text-conditioned synthesis.

Most diffusion and flow-matching generators define the prior, probability path, and prediction target in the same representation space. Latent diffusion improves efficiency by moving this path into an autoencoder latent space, but the final sample is still produced by a separately trained decoder. This separation creates a mismatch: the generator is optimized for latent-space prediction, while final quality depends on how the decoder handles generated latents that may differ from clean encoder outputs. We introduce CrossFlow, a cross-space flow formulation that maps noisy latent inputs directly to pixel-space images. The key technical step is a velocity-free one-step objective: the latent trajectory defines the training path, but the supervised prediction is an image rather than a latent displacement. This lets one model act both as a one-step latent-to-pixel generator and as a decoder replacement for latent diffusion pipelines. On class-conditional ImageNet-1k at 256times256, CrossFlow-XL achieves 1.62 FID with one function evaluation. Ablations show that the latent encoder and pixel-space perceptual and adversarial losses are important for fidelity. These results indicate that cross-space flow objectives can combine the efficiency of latent representations with direct pixel-space supervision, without requiring a separate decoder at inference.

Few-step video generation has been significantly advanced by consistency distillation. However, the performance of consistency-distilled models often degrades as more sampling steps are allocated at test time, limiting their effectiveness for any-step video diffusion. This limitation arises because consistency distillation replaces the original probability-flow ODE trajectory with a consistency-sampling trajectory, weakening the desirable test-time scaling behavior of ODE sampling. To address this limitation, we introduce AnyFlow, the first any-step video diffusion distillation framework based on flow maps. Instead of distilling a model for only a few fixed sampling steps, AnyFlow optimizes the full ODE sampling trajectory. To this end, we shift the distillation target from endpoint consistency mapping (z_{t}rightarrow z_{0}) to flow-map transition learning (z_{t}rightarrow z_{r}) over arbitrary time intervals. We further propose Flow Map Backward Simulation, which decomposes a full Euler rollout into shortcut flow-map transitions, enabling efficient on-policy distillation that reduces test-time errors (i.e., discretization error in few-step sampling and exposure bias in causal generation). Extensive experiments across both bidirectional and causal architectures, at scales ranging from 1.3B to 14B parameters, demonstrate that AnyFlow achieves performance matches or surpasses consistency-based counterparts in the few-step regime, while scaling with sampling step budgets.

Diffusion models have emerged as a powerful tool for point cloud generation. A key component that drives the impressive performance for generating high-quality samples from noise is iteratively denoise for thousands of steps. While beneficial, the complexity of learning steps has limited its applications to many 3D real-world. To address this limitation, we propose Point Straight Flow (PSF), a model that exhibits impressive performance using one step. Our idea is based on the reformulation of the standard diffusion model, which optimizes the curvy learning trajectory into a straight path. Further, we develop a distillation strategy to shorten the straight path into one step without a performance loss, enabling applications to 3D real-world with latency constraints. We perform evaluations on multiple 3D tasks and find that our PSF performs comparably to the standard diffusion model, outperforming other efficient 3D point cloud generation methods. On real-world applications such as point cloud completion and training-free text-guided generation in a low-latency setup, PSF performs favorably.

We propose Delta Velocity Rectified Flow (DVRF), a novel inversion-free, path-aware editing framework within rectified flow models for text-to-image editing. DVRF is a distillation-based method that explicitly models the discrepancy between the source and target velocity fields in order to mitigate over-smoothing artifacts rampant in prior distillation sampling approaches. We further introduce a time-dependent shift term to push noisy latents closer to the target trajectory, enhancing the alignment with the target distribution. We theoretically demonstrate that when this shift is disabled, DVRF reduces to Delta Denoising Score, thereby bridging score-based diffusion optimization and velocity-based rectified-flow optimization. Moreover, when the shift term follows a linear schedule under rectified-flow dynamics, DVRF generalizes the Inversion-free method FlowEdit and provides a principled theoretical interpretation for it. Experimental results indicate that DVRF achieves superior editing quality, fidelity, and controllability while requiring no architectural modifications, making it efficient and broadly applicable to text-to-image editing tasks. Code is available at https://github.com/gaspardbd/DeltaVelocityRectifiedFlow.

In this paper, we propose a Rectified Flow Auto Coder (RAC) inspired by Rectified Flow to replace the traditional VAE: 1. It achieves multi-step decoding by applying the decoder to flow timesteps. Its decoding path is straight and correctable, enabling step-by-step refinement. 2. The model inherently supports bidirectional inference, where the decoder serves as the encoder through time reversal (hence Coder rather than encoder or decoder), reducing parameter count by nearly 41%. 3. This generative decoding method improves generation quality since the model can correct latent variables along the path, partially addressing the reconstruction--generation gap. Experiments show that RAC surpasses SOTA VAEs in both reconstruction and generation with approximately 70% lower computational cost.

Conditional diffusion and flow models routinely fail to satisfy the very constraints that define their task. For instance, a depth-conditioned model often produces images whose re-extracted depth disagrees with the input, even though the forward operator--the depth predictor defining the constraint--is available during both training and inference. Existing approaches generally fall into two categories: supervised models that treat the conditioning signal as a static cue and ignore alignment information at inference, and guidance-based methods that consult it through hand-tuned linear updates, typically trading fidelity to the condition against the plausibility of the generated sample. We argue that the fundamental gap in both paradigms is that the model is never trained to utilize its own alignment error. We introduce FlowBender, a closed-loop framework that treats this error as a first-class input, training the network to learn a correction policy conditioned on inference-time feedback. At each step, an unguided look-ahead pass estimates the clean signal, a task-specific deviation is computed via the forward operator, and a refinement pass consumes this signal to produce a corrected velocity. We propose several variants of FlowBender, including a gradient-based formulation for differentiable operators and a zero-order variant for non-differentiable settings such as JPEG compression. For efficient sampling, we introduce a prior-step shortcut that enables closed-loop correction at a minimal additional computational cost. Across image-to-image translation, restoration, and 3D mesh texturing, FlowBender consistently outperforms standard supervised baselines, alignment-loss-augmented training, and state-of-the-art inference-time guidance, improving fidelity and plausibility simultaneously rather than trading them against each other. Project page: https://flow-bender.github.io/

While Flow Matching theoretically guarantees constant-velocity trajectories, we identify a critical breakdown in high-dimensional practice: the Velocity Deficit. We show that the MSE objective systematically underestimates velocity magnitude, causing generated samples to fail to reach the data manifold-a phenomenon we term Integration Lag. To rectify this, we propose Initial Energy Injection, instantiated via two complementary methods: the training-based Magnitude-Aware Flow Matching (MAFM) and the training-free Scale Schedule Corrector (SSC). Both are grounded in our discovery of a crucial asymmetry: velocity contraction causes harmful kinetic stagnation at the trajectory's start, yet acts as a beneficial denoising mechanism at its end. Empirically, SSC yields significant efficiency gains with zero retraining and just one line of code. On ImageNet-1k (256x256), it improves FID by 44.6% (from 13.68 to 7.58) and achieves a 5x speedup, enabling a 50-step generator (FID 7.58) to beat a 250-step baseline (FID 8.65). Furthermore, our methods generalize to Text-to-Image tasks and high-resolution generation, improving FID on MS-COCO by ~22%.

Flow matching (FM) is a general framework for defining probability paths via Ordinary Differential Equations (ODEs) to transform between noise and data samples. Recent approaches attempt to straighten these flow trajectories to generate high-quality samples with fewer function evaluations, typically through iterative rectification methods or optimal transport solutions. In this paper, we introduce Consistency Flow Matching (Consistency-FM), a novel FM method that explicitly enforces self-consistency in the velocity field. Consistency-FM directly defines straight flows starting from different times to the same endpoint, imposing constraints on their velocity values. Additionally, we propose a multi-segment training approach for Consistency-FM to enhance expressiveness, achieving a better trade-off between sampling quality and speed. Preliminary experiments demonstrate that our Consistency-FM significantly improves training efficiency by converging 4.4x faster than consistency models and 1.7x faster than rectified flow models while achieving better generation quality. Our code is available at: https://github.com/YangLing0818/consistency_flow_matching

Flow-GRPO successfully applies reinforcement learning to flow models, but uses uniform credit assignment across all steps. This ignores the temporal structure of diffusion generation: early steps determine composition and content (low-frequency structure), while late steps resolve details and textures (high-frequency details). Moreover, assigning uniform credit based solely on the final image can inadvertently reward suboptimal intermediate steps, especially when errors are corrected later in the diffusion trajectory. We propose Stepwise-Flow-GRPO, which assigns credit based on each step's reward improvement. By leveraging Tweedie's formula to obtain intermediate reward estimates and introducing gain-based advantages, our method achieves superior sample efficiency and faster convergence. We also introduce a DDIM-inspired SDE that improves reward quality while preserving stochasticity for policy gradients.

Image super-resolution (ISR) has witnessed remarkable progress with diffusion models and flow matching. The dominant text-to-image (T2I) based approaches leverage large-scale foundation models as generative priors, achieving impressive perceptual quality but at the cost of massive model sizes and prohibitive training expenses. Recent flow-matching-based vision-only approaches have made significant strides; however, they adopt standard flow formulations that transport from a pure Gaussian prior to the data distribution, discarding the rich structural information already present in the low-quality (LQ) input. Furthermore, existing single-step acceleration techniques often forfeit the model's multi-step inference capability. In this paper, we propose Residual Flow Matching for Image Super-Resolution (RFMSR), a vision-only framework that centers the source distribution at the LQ latent, reducing transport distance and preserving structural priors throughout the flow trajectory. We further introduce a two-phase training strategy: Phase I pretrains the velocity field via conditional flow matching, while Phase II applies end-to-end supervision to the single-step prediction while retaining the velocity loss across all timesteps, achieving high-quality single-step generation without sacrificing multi-step refinement. Extensive experiments demonstrate that RFMSR achieves comparable or even superior perceptual quality compared to state-of-the-art (SOTA) methods. The source code is available at https://github.com/Faze-Hsw/RFMSR.

Diffusion-based unsupervised image registration has been explored for cardiac cine MR, but expensive multi-step inference limits practical use. We propose FlowReg, a flow-matching framework in displacement field space that achieves strong registration in as few as two steps and supports further refinement with more steps. FlowReg uses warmup-reflow training: a single-step network first acts as a teacher, then a student learns to refine from arbitrary intermediate states, removing the need for a pre-trained model as in existing methods. An Initial Guess strategy feeds back the model prediction as the next starting point, improving refinement from step two onward. On ACDC and MM2 across six tasks (including cross-dataset generalization), FlowReg outperforms the state of the art on five tasks (+0.6% mean Dice score on average), with the largest gain in the left ventricle (+1.09%), and reduces LVEF estimation error on all six tasks (-2.58 percentage points), using only 0.7% extra parameters and no segmentation labels. Code is available at https://github.com/mathpluscode/FlowReg.

The recent wave of one-step generative models, which compress the multi-step trajectory of diffusion via either distillation or learned flow maps, has reached an inflection point where they can generate high-quality images. Here, we ask a natural question that follows from these advances: what happens to the denoising trajectory of multi-step diffusion when generation is compressed into a single forward pass? We offer an empirical observation we call depth as time: the denoising computation that multi-step diffusion performs across sampling steps appears to unfold across the depth of a single forward pass, and can be recovered by decoding intermediate layers with the model's own output head. Most interestingly, we show that this depthwise computation depends on the transport task a flow map is trained to solve. The most surprising case is MeanFlow, where probing shorter transport intervals reveals both denoising and renoising within a single network evaluation. In contrast, generators trained without a time-indexed transport task, such as drifting models, do not exhibit the same depthwise denoising. Consequently, we show that models that exhibit the depthwise denoising phenomenon are more compressible across the layerwise computation: a MeanFlow SiT-L/2 model can be compressed by 16.6times in parameters into a single time-conditioned block. We offer an explanation for this denoise-then-renoise behavior and show that, when we treat the layerwise computation explicitly as a flow, a single time-conditioned block can be trained to denoise across layers, compressing a MeanFlow SiT-L/2 model by 16.6times in parameters. Together, these results suggest that the temporal computation of diffusion is not eliminated by one-step generation, but reorganized across network depth.

Building on the success of diffusion models in visual generation, flow-based models reemerge as another prominent family of generative models that have achieved competitive or better performance in terms of both visual quality and inference speed. By learning the velocity field through flow-matching, flow-based models tend to produce a straighter sampling trajectory, which is advantageous during the sampling process. However, unlike diffusion models for which fast samplers are well-developed, efficient sampling of flow-based generative models has been rarely explored. In this paper, we propose a framework called FlowTurbo to accelerate the sampling of flow-based models while still enhancing the sampling quality. Our primary observation is that the velocity predictor's outputs in the flow-based models will become stable during the sampling, enabling the estimation of velocity via a lightweight velocity refiner. Additionally, we introduce several techniques including a pseudo corrector and sample-aware compilation to further reduce inference time. Since FlowTurbo does not change the multi-step sampling paradigm, it can be effectively applied for various tasks such as image editing, inpainting, etc. By integrating FlowTurbo into different flow-based models, we obtain an acceleration ratio of 53.1%sim58.3% on class-conditional generation and 29.8%sim38.5% on text-to-image generation. Notably, FlowTurbo reaches an FID of 2.12 on ImageNet with 100 (ms / img) and FID of 3.93 with 38 (ms / img), achieving the real-time image generation and establishing the new state-of-the-art. Code is available at https://github.com/shiml20/FlowTurbo.

We present SD3.5-Flash, an efficient few-step distillation framework that brings high-quality image generation to accessible consumer devices. Our approach distills computationally prohibitive rectified flow models through a reformulated distribution matching objective tailored specifically for few-step generation. We introduce two key innovations: "timestep sharing" to reduce gradient noise and "split-timestep fine-tuning" to improve prompt alignment. Combined with comprehensive pipeline optimizations like text encoder restructuring and specialized quantization, our system enables both rapid generation and memory-efficient deployment across different hardware configurations. This democratizes access across the full spectrum of devices, from mobile phones to desktop computers. Through extensive evaluation including large-scale user studies, we demonstrate that SD3.5-Flash consistently outperforms existing few-step methods, making advanced generative AI truly accessible for practical deployment.

Generative flow and diffusion models provide the continuous, multimodal action distributions needed for high-precision robotic policies. However, their reliance on iterative sampling introduces severe inference latency, degrading control frequency and harming performance in time-sensitive manipulation. To address this problem, we propose the One-Step Flow Policy (OFP), a from-scratch self-distillation framework for high-fidelity, single-step action generation without a pre-trained teacher. OFP unifies a self-consistency loss to enforce coherent transport across time intervals, and a self-guided regularization to sharpen predictions toward high-density expert modes. In addition, a warm-start mechanism leverages temporal action correlations to minimize the generative transport distance. Evaluations across 56 diverse simulated manipulation tasks demonstrate that a one-step OFP achieves state-of-the-art results, outperforming 100-step diffusion and flow policies while accelerating action generation by over 100times. We further integrate OFP into the π_{0.5} model on RoboTwin 2.0, where one-step OFP surpasses the original 10-step policy. These results establish OFP as a practical, scalable solution for highly accurate and low-latency robot control.

Flow Matching (FM) constructs linear conditional probability paths, but the learned marginal velocity field inevitably exhibits strong curvature due to trajectory superposition. This curvature severely inflates numerical truncation errors, bottlenecking few-step sampling. To overcome this, we introduce Isokinetic Flow Matching (Iso-FM), a lightweight, Jacobian-free dynamical regularizer that directly penalizes pathwise acceleration. By using a self-guided finite-difference approximation of the material derivative Dv/Dt, Iso-FM enforces local velocity consistency without requiring auxiliary encoders or expensive second-order autodifferentiation. Operating as a pure plug-and-play addition to single-stage FM training, Iso-FM dramatically improves few-step generation. On CIFAR-10 (DiT-S/2), Iso-FM slashes conditional non-OT FID at 2 steps from 78.82 to 27.13 - a 2.9x relative efficiency gain - and reaches a best-observed FID at 4 steps of 10.23. These results firmly establish acceleration regularization as a principled, compute-efficient mechanism for fast generative sampling.

The generative power of diffusion models (DMs) has recently enabled high-performing decision-making algorithms in offline reinforcement learning (RL), achieving state-of-the-art results across standard benchmarks. Among them, Diffusion Q-Learning (DQL) stands out as a leading method for its consistently strong performance. Nevertheless, DQL remains limited in practice due to its reliance on multi-step denoising for action generation during both training and inference. Although one-step denoising is desirable, simply applying it to DQL leads to a drastic performance drop. In this work, we revisit DQL and identify its core limitations. We then propose One-Step Flow Q-Learning (OFQL), a novel framework that enables efficient one-step action generation during both training and inference, without requiring auxiliary models, distillation, or multi-phase training. Specifically, OFQL reformulates DQL within the sample-efficient Flow Matching (FM) framework. While conventional FM induces curved generative trajectories that impede one-step generation, OFQL instead learns an average velocity field that facilitates direct, accurate action generation. Collectively, OFQL eliminates the need for multi-step sampling and recursive gradient updates in DQL, resulting in faster and more robust training and inference. Extensive experiments on the D4RL benchmark demonstrate that OFQL outperforms DQL and other diffusion-based baselines, while substantially reducing both training and inference time compared to DQL.

This paper focuses on the alignment of flow matching models with human preferences. A promising way is fine-tuning by directly backpropagating reward gradients through the differentiable generation process of flow matching. However, backpropagating through long trajectories results in prohibitive memory costs and gradient explosion. Therefore, direct-gradient methods struggle to update early generation steps, which are crucial for determining the global structure of the final image. To address this issue, we introduce LeapAlign, a fine-tuning method that reduces computational cost and enables direct gradient propagation from reward to early generation steps. Specifically, we shorten the long trajectory into only two steps by designing two consecutive leaps, each skipping multiple ODE sampling steps and predicting future latents in a single step. By randomizing the start and end timesteps of the leaps, LeapAlign leads to efficient and stable model updates at any generation step. To better use such shortened trajectories, we assign higher training weights to those that are more consistent with the long generation path. To further enhance gradient stability, we reduce the weights of gradient terms with large magnitude, instead of completely removing them as done in previous works. When fine-tuning the Flux model, LeapAlign consistently outperforms state-of-the-art GRPO-based and direct-gradient methods across various metrics, achieving superior image quality and image-text alignment.

Language models based on discrete diffusion have attracted widespread interest for their potential to provide faster generation than autoregressive models. In practice, however, they exhibit a sharp degradation of sample quality in the few-step regime, failing to realize this promise. Here we show that language models leveraging flow-based continuous denoising can outperform discrete diffusion in both quality and speed. By revisiting the fundamentals of flows over discrete modalities, we build a flow-based language model (FLM) that performs Euclidean denoising over one-hot token encodings. We show that the model can be trained by predicting the clean data via a cross entropy objective, where we introduce a simple time reparameterization that greatly improves training stability and generation quality. By distilling FLM into its associated flow map, we obtain a distilled flow map language model (FMLM) capable of few-step generation. On the LM1B and OWT language datasets, FLM attains generation quality matching state-of-the-art discrete diffusion models. With FMLM, our approach outperforms recent few-step language models across the board, with one-step generation exceeding their 8-step quality. Our work calls into question the widely held hypothesis that discrete diffusion processes are necessary for generative modeling over discrete modalities, and paves the way toward accelerated flow-based language modeling at scale. Code is available at https://github.com/david3684/flm.

Diffusion models have achieved remarkable generation quality, but they suffer from significant inference cost due to their reliance on multiple sequential denoising steps, motivating recent efforts to distill this inference process into a few-step regime. However, existing distillation methods typically approximate the teacher trajectory by using linear shortcuts, which makes it difficult to match its constantly changing tangent directions as velocities evolve across timesteps, thereby leading to quality degradation. To address this limitation, we propose ArcFlow, a few-step distillation framework that explicitly employs non-linear flow trajectories to approximate pre-trained teacher trajectories. Concretely, ArcFlow parameterizes the velocity field underlying the inference trajectory as a mixture of continuous momentum processes. This enables ArcFlow to capture velocity evolution and extrapolate coherent velocities to form a continuous non-linear trajectory within each denoising step. Importantly, this parameterization admits an analytical integration of this non-linear trajectory, which circumvents numerical discretization errors and results in high-precision approximation of the teacher trajectory. To train this parameterization into a few-step generator, we implement ArcFlow via trajectory distillation on pre-trained teacher models using lightweight adapters. This strategy ensures fast, stable convergence while preserving generative diversity and quality. Built on large-scale models (Qwen-Image-20B and FLUX.1-dev), ArcFlow only fine-tunes on less than 5% of original parameters and achieves a 40x speedup with 2 NFEs over the original multi-step teachers without significant quality degradation. Experiments on benchmarks show the effectiveness of ArcFlow both qualitatively and quantitatively.

Diffusion models have achieved remarkable success across various domains. However, their slow generation speed remains a critical challenge. Existing acceleration methods, while aiming to reduce steps, often compromise sample quality, controllability, or introduce training complexities. Therefore, we propose RayFlow, a novel diffusion framework that addresses these limitations. Unlike previous methods, RayFlow guides each sample along a unique path towards an instance-specific target distribution. This method minimizes sampling steps while preserving generation diversity and stability. Furthermore, we introduce Time Sampler, an importance sampling technique to enhance training efficiency by focusing on crucial timesteps. Extensive experiments demonstrate RayFlow's superiority in generating high-quality images with improved speed, control, and training efficiency compared to existing acceleration techniques.

We formulate a hierarchical rectified flow to model data distributions. It hierarchically couples multiple ordinary differential equations (ODEs) and defines a time-differentiable stochastic process that generates a data distribution from a known source distribution. Each ODE resembles the ODE that is solved in a classic rectified flow, but differs in its domain, i.e., location, velocity, acceleration, etc. Unlike the classic rectified flow formulation, which formulates a single ODE in the location domain and only captures the expected velocity field (sufficient to capture a multi-modal data distribution), the hierarchical rectified flow formulation models the multi-modal random velocity field, acceleration field, etc., in their entirety. This more faithful modeling of the random velocity field enables integration paths to intersect when the underlying ODE is solved during data generation. Intersecting paths in turn lead to integration trajectories that are more straight than those obtained in the classic rectified flow formulation, where integration paths cannot intersect. This leads to modeling of data distributions with fewer neural function evaluations. We empirically verify this on synthetic 1D and 2D data as well as MNIST, CIFAR-10, and ImageNet-32 data. Our code is available at: https://riccizz.github.io/HRF/.

We present ACE-Step v1.5, a highly efficient open-source music foundation model that brings commercial-grade generation to consumer hardware. On commonly used evaluation metrics, ACE-Step v1.5 achieves quality beyond most commercial music models while remaining extremely fast -- under 2 seconds per full song on an A100 and under 10 seconds on an RTX 3090. The model runs locally with less than 4GB of VRAM, and supports lightweight personalization: users can train a LoRA from just a few songs to capture their own style. At its core lies a novel hybrid architecture where the Language Model (LM) functions as an omni-capable planner: it transforms simple user queries into comprehensive song blueprints -- scaling from short loops to 10-minute compositions -- while synthesizing metadata, lyrics, and captions via Chain-of-Thought to guide the Diffusion Transformer (DiT). Uniquely, this alignment is achieved through intrinsic reinforcement learning relying solely on the model's internal mechanisms, thereby eliminating the biases inherent in external reward models or human preferences. Beyond standard synthesis, ACE-Step v1.5 unifies precise stylistic control with versatile editing capabilities -- such as cover generation, repainting, and vocal-to-BGM conversion -- while maintaining strict adherence to prompts across 50+ languages. This paves the way for powerful tools that seamlessly integrate into the creative workflows of music artists, producers, and content creators. The code, the model weights and the demo are available at: https://ace-step.github.io/ace-step-v1.5.github.io/

Flow-based text-to-image (T2I) models excel at prompt-driven image generation, but falter on Image Restoration (IR), often "drifting away" from being faithful to the measurement. Prior work mitigate this drift with data-specific flows or task-specific adapters that are computationally heavy and not scalable across tasks. This raises the question "Can't we efficiently manipulate the existing generative capabilities of a flow model?" To this end, we introduce FlowSteer (FS), an operator-aware conditioning scheme that injects measurement priors along the sampling path,coupling a frozed flow's implicit guidance with explicit measurement constraints. Across super-resolution, deblurring, denoising, and colorization, FS improves measurement consistency and identity preservation in a strictly zero-shot setting-no retrained models, no adapters. We show how the nature of flow models and their sensitivities to noise inform the design of such a scheduler. FlowSteer, although simple, achieves a higher fidelity of reconstructed images, while leveraging the rich generative priors of flow models. All data and code will be publicly available https://tharindu-nirmal.github.io/FlowSteer/{in this link}.

Diffusion models (DMs) have significantly advanced the development of real-world image super-resolution (Real-ISR), but the computational cost of multi-step diffusion models limits their application. One-step diffusion models generate high-quality images in a one sampling step, greatly reducing computational overhead and inference latency. However, most existing one-step diffusion methods are constrained by the performance of the teacher model, where poor teacher performance results in image artifacts. To address this limitation, we propose FluxSR, a novel one-step diffusion Real-ISR technique based on flow matching models. We use the state-of-the-art diffusion model FLUX.1-dev as both the teacher model and the base model. First, we introduce Flow Trajectory Distillation (FTD) to distill a multi-step flow matching model into a one-step Real-ISR. Second, to improve image realism and address high-frequency artifact issues in generated images, we propose TV-LPIPS as a perceptual loss and introduce Attention Diversification Loss (ADL) as a regularization term to reduce token similarity in transformer, thereby eliminating high-frequency artifacts. Comprehensive experiments demonstrate that our method outperforms existing one-step diffusion-based Real-ISR methods. The code and model will be released at https://github.com/JianzeLi-114/FluxSR.

A deployable text-to-image diffusion model must hold several capabilities at once, such as instruction following, text rendering and human preference, and must sample in a few steps. Capabilities and few-step sampling are built in separate stages: a full-step model first consolidates capabilities through multi-teacher on-policy distillation, then serves as a fixed teacher for step distillation. Every full-step model we evaluate scores lower once compressed, and the second stage cannot begin until the first finishes. We introduce StepX-OPD, which merges the two stages: one student acquires every capability while learning to sample in a few steps, so frozen specialists supervise it on the states its own rollout visits rather than on a longer trajectory it never runs. Because a decomposition of the rollout's KL weights velocity mismatch most heavily near the clean end, we also regress the student's velocity on the low-noise part of the rollout. Separately, we find that capability integration makes models write prompt words into images on prompts that never asked for text, and we give a variant that lowers it. We evaluate on SD3.5-Medium and FLUX.1-dev across instruction following, text rendering, image quality and human preference. On both architectures, StepX-OPD attains the highest normalized average score among the four-step methods compared and exceeds the forty-step Flow-OPD model, and on SD3.5-Medium it trains with about 37% fewer GPU-hours than sequential DiffusionOPD followed by step distillation.

Foundations of a new projection-based model reduction approach for convection dominated nonlinear fluid flows are summarized. In this method the evolution of the flow is approximated in the Lagrangian frame of reference. Global basis functions are used to approximate both the state and the position of the Lagrangian computational domain. It is demonstrated that in this framework, certain wave-like solutions exhibit low-rank structure and thus, can be efficiently compressed using relatively few global basis. The proposed approach is successfully demonstrated for the reduction of several simple but representative problems.

We present a flow-based approach to the optimal transport (OT) problem between two continuous distributions pi_0,pi_1 on R^d, of minimizing a transport cost E[c(X_1-X_0)] in the set of couplings (X_0,X_1) whose marginal distributions on X_0,X_1 equals pi_0,pi_1, respectively, where c is a cost function. Our method iteratively constructs a sequence of neural ordinary differentiable equations (ODE), each learned by solving a simple unconstrained regression problem, which monotonically reduce the transport cost while automatically preserving the marginal constraints. This yields a monotonic interior approach that traverses inside the set of valid couplings to decrease the transport cost, which distinguishes itself from most existing approaches that enforce the coupling constraints from the outside. The main idea of the method draws from rectified flow, a recent approach that simultaneously decreases the whole family of transport costs induced by convex functions c (and is hence multi-objective in nature), but is not tailored to minimize a specific transport cost. Our method is a single-object variant of rectified flow that guarantees to solve the OT problem for a fixed, user-specified convex cost function c.

We consider the problem of modeling high-speed flows using machine learning methods. While most prior studies focus on low-speed fluid flows in which uniform time-stepping is practical, flows approaching and exceeding the speed of sound exhibit sudden changes such as shock waves. In such cases, it is essential to use adaptive time-stepping methods to allow a temporal resolution sufficient to resolve these phenomena while simultaneously balancing computational costs. Here, we propose a two-phase machine learning method, known as ShockCast, to model high-speed flows with adaptive time-stepping. In the first phase, we propose to employ a machine learning model to predict the timestep size. In the second phase, the predicted timestep is used as an input along with the current fluid fields to advance the system state by the predicted timestep. We explore several physically-motivated components for timestep prediction and introduce timestep conditioning strategies inspired by neural ODE and Mixture of Experts. As ShockCast is the first framework for learning high-speed flows, we evaluate our methods by generating two supersonic flow datasets, available at https://huggingface.co/datasets/divelab. Our code is publicly available as part of the AIRS library (https://github.com/divelab/AIRS).

We present DEMON, a real-time diffusion engine that makes the denoising process playable as a live musical instrument: a control surface both broad (many parameters shaped per-frame across the output) and responsive (each control taking effect as fast as its place in the denoising loop allows). Built on ACE-Step 1.5 and StreamDiffusion's ring-buffer architecture with TensorRT acceleration, it sustains up to 12.3 decoder completions per second for 60-second music on a single consumer GPU (RTX 5090), or 11.3 generations per second at our production ring-depth of 4. At these rates denoising parameters become viable as live performance controls, but the ring buffer propagates per-request changes only at its drain rate, a floor of S denoising steps. We contribute four mechanisms. (1) Per-slot heterogeneous denoise scheduling: each ring-buffer slot owns its timestep schedule, so a moving denoise slider is tracked without wiping the in-flight queue, where the upstream global-schedule design must rebuild and discard it. (2) Shared mutable per-step state, giving any parameter consulted at every solver step next-tick effect, bypassing ring-buffer drain. (3) Per-frame source blending: a sampling-time control on the standard SDE re-noise step, giving a framewise transformation-strength axis that complements scalar denoise scheduling. (4) Windowed VAE decode exploiting receptive-field analysis for an 8.0x decode speedup. Together these separate streaming-diffusion parameters into four propagation classes, by onset and convergence latency.

Few-step distillation reduces the sampling cost of diffusion and flow models, but existing approaches often require auxiliary score models or specialized architectures. We show that simple on-policy velocity regression already provides a strong foundation for 4-NFE generation. To represent teacher velocity variation within each coarse transition, we introduce Pivot, a training-only residual proxy that separates local corrections from the student's interval-mean prediction. We further repel the student from weaker teacher predictions, providing a lightweight mechanism for avoiding undesirable modes. The resulting framework, Simplified Matching Distillation (SMD), remains entirely regression-based, requires neither online score estimation nor adversarial training, and leaves the deployed generator unchanged. We evaluate SMD on image generation and editing, 3D generation, video synthesis, and joint audio--video generation, scaling to 33 billion parameters. At 4-NFE, SMD outperforms strong few-step baselines and surpasses multi-step teachers on several benchmarks. It also supports cross-model, multi-teacher, and causal-video distillation.

We propose a unified, few-step generative modeling framework based on cumulative flow maps for long-range transport in probability space, inspired by flow-map techniques for physical transport and dynamics. At its core is a cumulative-flow abstraction that connects local, instantaneous updates with finite-time transport, enabling generative models to reason about global state transitions. This perspective yields a unified few-step framework built on cumulative transport and cumulative parameterization that applies broadly to existing diffusion- and flow-based models without being tied to a specific prediction instantiation. Our formulation supports few-step and even one-step generation while preserving synthesis quality, requiring only minimal changes to time embeddings and training objectives, and no increase in model capacity. We demonstrate its effectiveness across diverse tasks, including image generation, geometric distribution modeling, joint prediction, and SDF generation, with reduced inference cost.

Flow matching has recently emerged as a strong paradigm for state-of-the-art text-to-image (T2I) generation, enabling high-quality generation with a small number of sampling steps. As these models are increasingly integrated into real-world applications, ensuring safe and non-sensitive content generation has become a critical requirement. However, adapting safety and concept removal methods to this new generation framework remains an open challenge. Specifically, prior methods largely rely on iterative trajectory steering across a number of denoising steps or on CLIP-centric prompt embedding manipulation. These design assumptions pose fundamental bottlenecks for safety in flow matching-based T2I generation, where limited sampling steps constrain iterative correction and modern context-aware text encoders diminish the effectiveness of embedding-level interventions. In this paper, we propose VESFlow, a training-free safety method tailored to flow matching with extremely few sampling steps. Leveraging the fact that flow matching models learn the marginal velocity, we directly edit the velocity field via a safe-conditional posterior. VESFlow steers the trajectory toward safe outputs while leaving the conditioning prompt unchanged. Building on the observation that VESFlow leaves outputs unchanged under benign prompts, we further introduce a risk score-based filtering that bypasses velocity editing to reduce computational cost while preserving benign prompt generation. Based on this filtering, we propose VESFlow+, a stronger variant of VESFlow that not only edits the velocity toward the safe direction, but also pushes it away from the unsafe direction. Experimental results show that VESFlow+ removes the target concept, reducing the attack success rate by NudeNet to 6.3% on Ring-A-Bell and 6.8% on MMA-Diffusion on the 4-step MeanFlow model, while preserving fidelity on benign prompts.

Flow-based methods have achieved significant success in various generative modeling tasks, capturing nuanced details within complex data distributions. However, few existing works have exploited this unique capability to resolve fine-grained structural details beyond generation tasks. This paper presents a flow-inspired framework for representation learning. First, we demonstrate that a rectified flow trained using independent coupling is zero everywhere at t=0.5 if and only if the source and target distributions are identical. We term this property the zero-flow criterion. Second, we show that this criterion can certify conditional independence, thereby extracting sufficient information from the data. Third, we translate this criterion into a tractable, simulation-free loss function that enables learning amortized Markov blankets in graphical models and latent representations in self-supervised learning tasks. Experiments on both simulated and real-world datasets demonstrate the effectiveness of our approach. The code reproducing our experiments can be found at: https://github.com/probabilityFLOW/zfe.

Recent advances in artificial intelligence (AI) have produced highly capable and controllable systems. This creates unprecedented opportunities for structured reasoning as well as collaboration among multiple AI systems and humans. To fully realize this potential, it is essential to develop a principled way of designing and studying such structured interactions. For this purpose, we introduce the conceptual framework of Flows: a systematic approach to modeling complex interactions. Flows are self-contained building blocks of computation, with an isolated state, communicating through a standardized message-based interface. This modular design allows Flows to be recursively composed into arbitrarily nested interactions, with a substantial reduction of complexity. Crucially, any interaction can be implemented using this framework, including prior work on AI--AI and human--AI interactions, prompt engineering schemes, and tool augmentation. We demonstrate the potential of Flows on the task of competitive coding, a challenging task on which even GPT-4 struggles. Our results suggest that structured reasoning and collaboration substantially improve generalization, with AI-only Flows adding +21 and human--AI Flows adding +54 absolute points in terms of solve rate. To support rapid and rigorous research, we introduce the aiFlows library. The library comes with a repository of Flows that can be easily used, extended, and composed into novel, more complex Flows. The aiFlows library is available at https://github.com/epfl-dlab/aiflows. Data and Flows for reproducing our experiments are available at https://github.com/epfl-dlab/cc_flows.

In this paper, we propose an efficient, fast, and versatile distillation method to accelerate the generation of pre-trained diffusion models: Flash Diffusion. The method reaches state-of-the-art performances in terms of FID and CLIP-Score for few steps image generation on the COCO2014 and COCO2017 datasets, while requiring only several GPU hours of training and fewer trainable parameters than existing methods. In addition to its efficiency, the versatility of the method is also exposed across several tasks such as text-to-image, inpainting, face-swapping, super-resolution and using different backbones such as UNet-based denoisers (SD1.5, SDXL) or DiT (Pixart-alpha), as well as adapters. In all cases, the method allowed to reduce drastically the number of sampling steps while maintaining very high-quality image generation. The official implementation is available at https://github.com/gojasper/flash-diffusion.

Recent progress in flow-based generative models and reinforcement learning (RL) has improved text-image alignment and visual quality. However, current RL training for flow models still has two main problems: (i) GRPO-style fixed per-prompt group sizes ignore variation in sampling importance across prompts, which leads to inefficient sampling and slower training; and (ii) trajectory-level advantages are reused as per-step estimates, which biases credit assignment along the flow. We propose SuperFlow, an RL training framework for flow-based models that adjusts group sizes with variance-aware sampling and computes step-level advantages in a way that is consistent with continuous-time flow dynamics. Empirically, SuperFlow reaches promising performance while using only 5.4% to 56.3% of the original training steps and reduces training time by 5.2% to 16.7% without any architectural changes. On standard text-to-image (T2I) tasks, including text rendering, compositional image generation, and human preference alignment, SuperFlow improves over SD3.5-M by 4.6% to 47.2%, and over Flow-GRPO by 1.7% to 16.0%.

Though Rectified Flows (ReFlows) with distillation offers a promising way for fast sampling, its fast inversion transforms images back to structured noise for recovery and following editing remains unsolved. This paper introduces FireFlow, a simple yet effective zero-shot approach that inherits the startling capacity of ReFlow-based models (such as FLUX) in generation while extending its capabilities to accurate inversion and editing in 8 steps. We first demonstrate that a carefully designed numerical solver is pivotal for ReFlow inversion, enabling accurate inversion and reconstruction with the precision of a second-order solver while maintaining the practical efficiency of a first-order Euler method. This solver achieves a 3times runtime speedup compared to state-of-the-art ReFlow inversion and editing techniques, while delivering smaller reconstruction errors and superior editing results in a training-free mode. The code is available at https://github.com/HolmesShuan/FireFlow{this URL}.

Stochastic gradient descent method and its variants constitute the core optimization algorithms that achieve good convergence rates for solving machine learning problems. These rates are obtained especially when these algorithms are fine-tuned for the application at hand. Although this tuning process can require large computational costs, recent work has shown that these costs can be reduced by line search methods that iteratively adjust the stepsize. We propose an alternative approach to stochastic line search by using a new algorithm based on forward step model building. This model building step incorporates second-order information that allows adjusting not only the stepsize but also the search direction. Noting that deep learning model parameters come in groups (layers of tensors), our method builds its model and calculates a new step for each parameter group. This novel diagonalization approach makes the selected step lengths adaptive. We provide convergence rate analysis, and experimentally show that the proposed algorithm achieves faster convergence and better generalization in well-known test problems. More precisely, SMB requires less tuning, and shows comparable performance to other adaptive methods.

Performing tasks on the web presents fundamental challenges to large language models (LLMs), including combinatorially large open-world tasks and variations across web interfaces. Simply specifying a large prompt to handle all possible behaviors and states is extremely complex, and results in behavior leaks between unrelated behaviors. Decomposition to distinct policies can address this challenge, but requires carefully handing off control between policies. We propose Stacked LLM Policies for Web Actions (SteP), an approach to dynamically compose policies to solve a diverse set of web tasks. SteP defines a Markov Decision Process where the state is a stack of policies representing the control state, i.e., the chain of policy calls. Unlike traditional methods that are restricted to static hierarchies, SteP enables dynamic control that adapts to the complexity of the task. We evaluate SteP against multiple baselines and web environments including WebArena, MiniWoB++, and a CRM. On WebArena, SteP improves (14.9\% to 33.5\%) over SOTA that use GPT-4 policies, while on MiniWob++, SteP is competitive with prior works while using significantly less data. Our code and data are available at https://asappresearch.github.io/webagents-step.

Simulations of turbulent flows in 3D are one of the most expensive simulations in computational fluid dynamics (CFD). Many works have been written on surrogate models to replace numerical solvers for fluid flows with faster, learned, autoregressive models. However, the intricacies of turbulence in three dimensions necessitate training these models with very small time steps, while generating realistic flow states requires either long roll-outs with many steps and significant error accumulation or starting from a known, realistic flow state - something we aimed to avoid in the first place. Instead, we propose to approach turbulent flow simulation as a generative task directly learning the manifold of all possible turbulent flow states without relying on any initial flow state. For our experiments, we introduce a challenging 3D turbulence dataset of high-resolution flows and detailed vortex structures caused by various objects and derive two novel sample evaluation metrics for turbulent flows. On this dataset, we show that our generative model captures the distribution of turbulent flows caused by unseen objects and generates high-quality, realistic samples amenable for downstream applications without access to any initial state.

Multistep inference is a bottleneck for real-time generative speech enhancement because flow- and diffusion-based systems learn an instantaneous velocity field and therefore rely on iterative ordinary differential equation (ODE) solvers. We introduce MeanFlowSE, a conditional generative model that learns the average velocity over finite intervals along a trajectory. Using a Jacobian-vector product (JVP) to instantiate the MeanFlow identity, we derive a local training objective that directly supervises finite-interval displacement while remaining consistent with the instantaneous-field constraint on the diagonal. At inference, MeanFlowSE performs single-step generation via a backward-in-time displacement, removing the need for multistep solvers; an optional few-step variant offers additional refinement. On VoiceBank-DEMAND, the single-step model achieves strong intelligibility, fidelity, and perceptual quality with substantially lower computational cost than multistep baselines. The method requires no knowledge distillation or external teachers, providing an efficient, high-fidelity framework for real-time generative speech enhancement. The proposed method is open-sourced at https://github.com/liduojia1/MeanFlowSE.

Generative planners based on diffusion/flow matching can learn to synthesize long-horizon trajectories from demonstrations. However, real-world deployment requires (i) enforcing safety constraints during execution and (ii) tight online replanning at fast execution rates. Prior safe diffusion/flow planners generate the agent's full trajectory at once, while repeatedly perturbing intermediate states to satisfy safety constraints. This approach is not only computationally intensive, but also introduces distribution shift since the learned sampling dynamics is distinct from the system's execution dynamics. We propose SafeStreamingFlow, a goal-conditioned planner that aligns flow sampling dynamics with execution dynamics by sequentially integrating a learned state vector field with hierarchical state prediction. Importantly, we need to enforce safety constraints only for the executed step via high order control barrier functions. Across navigation, racing, and locomotion benchmarks, SafeStreamingFlow reduces planning latency and improves safety compared to existing methods, while maintaining competitive goal-reaching success.

Diffusion models have revolutionized generative tasks through high-fidelity outputs, yet flow matching (FM) offers faster inference and empirical performance gains. However, current foundation FM models are computationally prohibitive for finetuning, while diffusion models like Stable Diffusion benefit from efficient architectures and ecosystem support. This work addresses the critical challenge of efficiently transferring knowledge from pre-trained diffusion models to flow matching. We propose Diff2Flow, a novel framework that systematically bridges diffusion and FM paradigms by rescaling timesteps, aligning interpolants, and deriving FM-compatible velocity fields from diffusion predictions. This alignment enables direct and efficient FM finetuning of diffusion priors with no extra computation overhead. Our experiments demonstrate that Diff2Flow outperforms na\"ive FM and diffusion finetuning particularly under parameter-efficient constraints, while achieving superior or competitive performance across diverse downstream tasks compared to state-of-the-art methods. We will release our code at https://github.com/CompVis/diff2flow.

Consistency-based generative models like Shortcut and MeanFlow achieve impressive results via a target-aware design for solving the Probability Flow ODE (PF-ODE). Typically, such methods introduce a target time r alongside the current time t to modulate outputs between a local multi-step derivative (r = t) and a global few-step integral (r = 0). However, the conventional "one input, one output" paradigm enforces a partition of the training budget, often allocating a significant portion (e.g., 75% in MeanFlow) solely to the multi-step objective for stability. This separation forces a trade-off: allocating sufficient samples to the multi-step objective leaves the few-step generation undertrained, which harms convergence and limits scalability. To this end, we propose Duality Models (DuMo) via a "one input, dual output" paradigm. Using a shared backbone with dual heads, DuMo simultaneously predicts velocity v_t and flow-map u_t from a single input x_t. This applies geometric constraints from the multi-step objective to every sample, bounding the few-step estimation without separating training objectives, thereby significantly improving stability and efficiency. On ImageNet 256 times 256, a 679M Diffusion Transformer with SD-VAE achieves a state-of-the-art (SOTA) FID of 1.79 in just 2 steps. Code is available at: https://github.com/LINs-lab/DuMo

Recently, a series of diffusion-aware distillation algorithms have emerged to alleviate the computational overhead associated with the multi-step inference process of Diffusion Models (DMs). Current distillation techniques often dichotomize into two distinct aspects: i) ODE Trajectory Preservation; and ii) ODE Trajectory Reformulation. However, these approaches suffer from severe performance degradation or domain shifts. To address these limitations, we propose Hyper-SD, a novel framework that synergistically amalgamates the advantages of ODE Trajectory Preservation and Reformulation, while maintaining near-lossless performance during step compression. Firstly, we introduce Trajectory Segmented Consistency Distillation to progressively perform consistent distillation within pre-defined time-step segments, which facilitates the preservation of the original ODE trajectory from a higher-order perspective. Secondly, we incorporate human feedback learning to boost the performance of the model in a low-step regime and mitigate the performance loss incurred by the distillation process. Thirdly, we integrate score distillation to further improve the low-step generation capability of the model and offer the first attempt to leverage a unified LoRA to support the inference process at all steps. Extensive experiments and user studies demonstrate that Hyper-SD achieves SOTA performance from 1 to 8 inference steps for both SDXL and SD1.5. For example, Hyper-SDXL surpasses SDXL-Lightning by +0.68 in CLIP Score and +0.51 in Aes Score in the 1-step inference.

Diffusion models generate high-quality images, but their inference cost comes from two sources: large denoising networks and repeated denoising steps. Existing compression pipelines usually attack these costs separately. Pruning reduces the network, but most pruning methods still rely on a long post-pruning retraining stage to recover a many-step sampler. Step distillation reduces the number of denoising steps, but it usually assumes a student that can already follow the teacher well enough to receive useful distillation gradients. This paper asks whether post-pruning retraining can be replaced by step distillation. We find that the direct replacement fails: after pruning an EDM2-XS teacher, starting SiDA from the pruned checkpoint produces unusable samples. We introduce a short teacher-alignment repair stage as a bridge between pruning and step distillation. The bridge matches the pruned generator to the teacher on noisy real-image latents, then hands the repaired checkpoint to one-step distillation. On ImageNet-512, the original EDM2-XS baseline uses 124.713M parameters and 63 network evaluations, reaching an FID of 3.53. With a suitable distillation objective, our 20% pruned one-step generator uses 98.826M parameters and one network evaluation, reaching an FID of 3.12. With 30% pruning, the model uses 88.029M parameters and one network evaluation, with an FID of 4.26.

Generative models have emerged as a major paradigm for offline multi-agent reinforcement learning (MARL), but existing approaches require many iterative sampling steps. Recent few-step accelerations either distill a joint teacher into independent students or apply averaged velocities independently per agent, suggesting that few-step inference requires sacrificing inter-agent coordination. We show this trade-off is not necessary: single-pass multi-agent generation can preserve coordination when the velocity field is natively joint-coupled. We propose Coordinated few-step Flow (CoFlow), an architecture that combines Coordinated Velocity Attention (CVA) with Adaptive Coordination Gating. A finite-difference consistency surrogate further replaces memory-prohibitive Jacobian-vector product backpropagation through the averaged velocity field with two stop-gradient forward passes. Across 60 configurations spanning MPE, MA-MuJoCo, and SMAC, CoFlow matches or surpasses Gaussian / value-based, transformer, diffusion, and prior flow baselines on episodic return. Three independent coordination probes confirm that the gains flow through inter-agent coordination rather than per-agent capacity. A denoising-step sweep shows that single-pass inference suffices on every configuration. CoFlow reaches state-of-the-art coordination quality in 1-3 denoising steps under both centralized and decentralized execution. Project page: https://github.com/Guowei-Zou/coflow.

Flow-based generative models have become a strong framework for high-quality generative modeling, yet pretrained models are rarely used in their vanilla conditional form: conditional samples without guidance often appear diffuse and lack fine-grained detail due to the smoothing effects of neural networks. Existing guidance techniques such as classifier-free guidance (CFG) improve fidelity but double the inference cost and typically reduce sample diversity. We introduce Momentum Guidance (MG), a new dimension of guidance that leverages the ODE trajectory itself. MG extrapolates the current velocity using an exponential moving average of past velocities and preserves the standard one-evaluation-per-step cost. It matches the effect of standard guidance without extra computation and can further improve quality when combined with CFG. Experiments demonstrate MG's effectiveness across benchmarks. Specifically, on ImageNet-256, MG achieves average improvements in FID of 36.68% without CFG and 25.52% with CFG across various sampling settings, attaining an FID of 1.597 at 64 sampling steps. Evaluations on large flow-based models like Stable Diffusion 3 and FLUX.1-dev further confirm consistent quality enhancements across standard metrics.

Recent advances in diffusion/flow-matching policies have enabled imitation learning of complex, multi-modal action trajectories. However, they are computationally expensive because they sample a trajectory of trajectories: a diffusion/flow trajectory of action trajectories. They discard intermediate action trajectories, and must wait for the sampling process to complete before any actions can be executed on the robot. We simplify diffusion/flow policies by treating action trajectories as flow trajectories. Instead of starting from pure noise, our algorithm samples from a narrow Gaussian around the last action. Then, it incrementally integrates a velocity field learned via flow matching to produce a sequence of actions that constitute a single trajectory. This enables actions to be streamed to the robot on-the-fly during the flow sampling process, and is well-suited for receding horizon policy execution. Despite streaming, our method retains the ability to model multi-modal behavior. We train flows that stabilize around demonstration trajectories to reduce distribution shift and improve imitation learning performance. Streaming flow policy outperforms prior methods while enabling faster policy execution and tighter sensorimotor loops for learning-based robot control. Project website: https://streaming-flow-policy.github.io/

Conditional flow matching (CFM) has emerged as a powerful framework for training continuous normalizing flows due to its computational efficiency and effectiveness. However, standard CFM often produces paths that deviate significantly from straight-line interpolations between prior and target distributions, making generation slower and less accurate due to the need for fine discretization at inference. Recent methods enhance CFM performance by inducing shorter and straighter trajectories but typically rely on computationally expensive mini-batch optimal transport (OT). Drawing insights from entropic optimal transport (EOT), we propose Weighted Conditional Flow Matching (W-CFM), a novel approach that modifies the classical CFM loss by weighting each training pair (x, y) with a Gibbs kernel. We show that this weighting recovers the entropic OT coupling up to some bias in the marginals, and we provide the conditions under which the marginals remain nearly unchanged. Moreover, we establish an equivalence between W-CFM and the minibatch OT method in the large-batch limit, showing how our method overcomes computational and performance bottlenecks linked to batch size. Empirically, we test our method on unconditional generation on various synthetic and real datasets, confirming that W-CFM achieves comparable or superior sample quality, fidelity, and diversity to other alternative baselines while maintaining the computational efficiency of vanilla CFM.

Flow matching has emerged as a compelling generative modeling approach that is widely used across domains. To generate data via a flow matching model, an ordinary differential equation (ODE) is numerically solved via forward integration of the modeled velocity field. To better capture the multi-modality that is inherent in typical velocity fields, hierarchical flow matching was recently introduced. It uses a hierarchy of ODEs that are numerically integrated when generating data. This hierarchy of ODEs captures the multi-modal velocity distribution just like vanilla flow matching is capable of modeling a multi-modal data distribution. While this hierarchy enables to model multi-modal velocity distributions, the complexity of the modeled distribution remains identical across levels of the hierarchy. In this paper, we study how to gradually adjust the complexity of the distributions across different levels of the hierarchy via mini-batch couplings. We show the benefits of mini-batch couplings in hierarchical rectified flow matching via compelling results on synthetic and imaging data. Code is available at https://riccizz.github.io/HRF_coupling.

Diffusion-based imitation learning improves Behavioral Cloning (BC) on multi-modal decision-making, but comes at the cost of significantly slower inference due to the recursion in the diffusion process. It urges us to design efficient policy generators while keeping the ability to generate diverse actions. To address this challenge, we propose AdaFlow, an imitation learning framework based on flow-based generative modeling. AdaFlow represents the policy with state-conditioned ordinary differential equations (ODEs), which are known as probability flows. We reveal an intriguing connection between the conditional variance of their training loss and the discretization error of the ODEs. With this insight, we propose a variance-adaptive ODE solver that can adjust its step size in the inference stage, making AdaFlow an adaptive decision-maker, offering rapid inference without sacrificing diversity. Interestingly, it automatically reduces to a one-step generator when the action distribution is uni-modal. Our comprehensive empirical evaluation shows that AdaFlow achieves high performance with fast inference speed.

We present rectified flow, a surprisingly simple approach to learning (neural) ordinary differential equation (ODE) models to transport between two empirically observed distributions \pi_0 and \pi_1, hence providing a unified solution to generative modeling and domain transfer, among various other tasks involving distribution transport. The idea of rectified flow is to learn the ODE to follow the straight paths connecting the points drawn from \pi_0 and \pi_1 as much as possible. This is achieved by solving a straightforward nonlinear least squares optimization problem, which can be easily scaled to large models without introducing extra parameters beyond standard supervised learning. The straight paths are special and preferred because they are the shortest paths between two points, and can be simulated exactly without time discretization and hence yield computationally efficient models. We show that the procedure of learning a rectified flow from data, called rectification, turns an arbitrary coupling of \pi_0 and \pi_1 to a new deterministic coupling with provably non-increasing convex transport costs. In addition, recursively applying rectification allows us to obtain a sequence of flows with increasingly straight paths, which can be simulated accurately with coarse time discretization in the inference phase. In empirical studies, we show that rectified flow performs superbly on image generation, image-to-image translation, and domain adaptation. In particular, on image generation and translation, our method yields nearly straight flows that give high quality results even with a single Euler discretization step.

Diffusion models can learn rich representations during data generation, showing potential for Self-Supervised Learning (SSL), but they face a trade-off between generative quality and discriminative performance. Their iterative sampling also incurs substantial computational and energy costs, hindering industrial and edge AI applications. To address these issues, we propose the Flow Matching-based Foundation Model (FlowFM), which jointly trains a representation encoder and a conditional flow matching generator. This decoupled design achieves both high-fidelity generation and effective recognition. By using flow matching to learn a simpler velocity field, FlowFM accelerates and stabilizes training, improving its efficiency for representation learning. Experiments on wearable sensor data show FlowFM reduces training time by 50.4\% compared to a diffusion-based approach. On downstream tasks, FlowFM surpassed the state-of-the-art SSL method (SSL-Wearables) on all five datasets while achieving up to a 51.0x inference speedup and maintaining high generative quality. The implementation code is available at https://github.com/Okita-Laboratory/jointOptimizationFlowMatching.

Recent advances in flow-based generative models have enabled training-free, text-guided image editing by inverting an image into its latent noise and regenerating it under a new target conditional guidance. However, existing methods struggle to preserve source fidelity: higher-order solvers incur additional model inferences, truncated inversion constrains editability, and feature injection methods lack architectural transferability. To address these limitations, we propose SteerFlow, a model-agnostic editing framework with strong theoretical guarantees on source fidelity. In the forward process, we introduce an Amortized Fixed-Point Solver that implicitly straightens the forward trajectory by enforcing velocity consistency across consecutive timesteps, yielding a high-fidelity inverted latent. In the backward process, we introduce Trajectory Interpolation, which adaptively blends target-editing and source-reconstruction velocities to keep the editing trajectory anchored to the source. To further improve background preservation, we introduce an Adaptive Masking mechanism that spatially constrains the editing signal with concept-guided segmentation and source-target velocity differences. Extensive experiments on FLUX.1-dev and Stable Diffusion 3.5 Medium demonstrate that SteerFlow consistently achieves better editing quality than existing methods. Finally, we show that SteerFlow extends naturally to a complex multi-turn editing paradigm without accumulating drift.

Classifier-free guidance (CFG) is a widely used technique for controllable generation in diffusion and flow-based models. Despite its empirical success, CFG relies on a heuristic linear extrapolation that is often sensitive to the guidance scale. In this work, we provide a principled interpretation of CFG through the lens of optimization. We demonstrate that the velocity field in flow matching corresponds to the gradient of a sequence of smoothed distance functions, which guides latent variables toward the scaled target image set. This perspective reveals that the standard CFG formulation is an approximation of this gradient, where the prediction gap, the discrepancy between conditional and unconditional outputs, governs guidance sensitivity. Leveraging this insight, we reformulate the CFG sampling as a homotopy optimization with a manifold constraint. This formulation necessitates a manifold projection step, which we implement via an incremental gradient descent scheme during sampling. To improve computational efficiency and stability, we further enhance this iterative process with Anderson Acceleration without requiring additional model evaluations. Our proposed methods are training-free and consistently refine generation fidelity, prompt alignment, and robustness to the guidance scale. We validate their effectiveness across diverse benchmarks, demonstrating significant improvements on large-scale models such as DiT-XL-2-256, Flux, and Stable Diffusion 3.5.

We introduce StreamDiffusion, a real-time diffusion pipeline designed for interactive image generation. Existing diffusion models are adept at creating images from text or image prompts, yet they often fall short in real-time interaction. This limitation becomes particularly evident in scenarios involving continuous input, such as Metaverse, live video streaming, and broadcasting, where high throughput is imperative. To address this, we present a novel approach that transforms the original sequential denoising into the batching denoising process. Stream Batch eliminates the conventional wait-and-interact approach and enables fluid and high throughput streams. To handle the frequency disparity between data input and model throughput, we design a novel input-output queue for parallelizing the streaming process. Moreover, the existing diffusion pipeline uses classifier-free guidance(CFG), which requires additional U-Net computation. To mitigate the redundant computations, we propose a novel residual classifier-free guidance (RCFG) algorithm that reduces the number of negative conditional denoising steps to only one or even zero. Besides, we introduce a stochastic similarity filter(SSF) to optimize power consumption. Our Stream Batch achieves around 1.5x speedup compared to the sequential denoising method at different denoising levels. The proposed RCFG leads to speeds up to 2.05x higher than the conventional CFG. Combining the proposed strategies and existing mature acceleration tools makes the image-to-image generation achieve up-to 91.07fps on one RTX4090, improving the throughputs of AutoPipline developed by Diffusers over 59.56x. Furthermore, our proposed StreamDiffusion also significantly reduces the energy consumption by 2.39x on one RTX3060 and 1.99x on one RTX4090, respectively.

Classifier-free guidance (CFG) is the workhorse for steering large diffusion models toward text-conditioned targets, yet its native application to rectified flow (RF) based models provokes severe off-manifold drift, yielding visual artifacts, text misalignment, and brittle behaviour. We present Rectified-CFG++, an adaptive predictor-corrector guidance that couples the deterministic efficiency of rectified flows with a geometry-aware conditioning rule. Each inference step first executes a conditional RF update that anchors the sample near the learned transport path, then applies a weighted conditional correction that interpolates between conditional and unconditional velocity fields. We prove that the resulting velocity field is marginally consistent and that its trajectories remain within a bounded tubular neighbourhood of the data manifold, ensuring stability across a wide range of guidance strengths. Extensive experiments on large-scale text-to-image models (Flux, Stable Diffusion 3/3.5, Lumina) show that Rectified-CFG++ consistently outperforms standard CFG on benchmark datasets such as MS-COCO, LAION-Aesthetic, and T2I-CompBench. Project page: https://rectified-cfgpp.github.io/

Extracting patient-specific vascular trees from volumetric medical images is fundamental to computational angiography and non-invasive hemodynamic assessment. Conventional voxel segmentation models often sever delicate bifurcations, while heuristic Euclidean Minimum Spanning Trees introduce non-anatomical shortcuts. Moreover, linear Poiseuille flow neglects quadratic kinetic dissipation across arterial narrowings, underestimating ischemia. We formulate an end-to-end framework decoupling continuous geometric arborescence generation from non-linear hemodynamics. First, an autonomous 3D Ostium Landmark Localization Head with dual-sinus query channels and spherical-gated refinement eliminates centerline seeding dependency, achieving cohort mean localization error of 7.63 mm (7.43 mm LCA, 7.83 mm RCA; 71.4% <= 8.0 mm) from raw contrast context. Second, a Spatially-Grounded Deformable Step Flow Architecture queries continuous 3D feature pyramids via trilinear sampling, sequentially generating trajectories with anchor boundary enforcement (X(0) = P_start). Third, a Top-Down Recursive Arborescence State Machine detects bifurcation peaks via Tree-NMS and parameterizes predecessor parent pointers (p_k < k), guaranteeing single connected acyclic tree topology (beta_0 = 1, beta_1 = 0) with differentiable step termination. Fourth, an iterative Picard non-linear Kirchhoff solver with Young-Tsai / Gould quadratic dissipation enforces machine-precision mass conservation (residual 5.82e-11 mL/s). Across 14 development patients under standardized in-silico stenosis stress testing (Q_0 = 4.0 mL/s), linear Poiseuille flow misclassifies 75% diameter lesions as non-ischemic (FFR > 0.80) in 14/14 cases, whereas our non-linear solver captures functional ischemia (FFR = 0.5864, lesion disparity 32.89 mmHg, p = 6.10e-5) with 3.66x collateral shunting. Test set firewall isolation was maintained.

State-of-the-art text-to-image models produce high-quality images, but inference remains expensive as generation requires several sequential ODE or denoising steps. Native one-step models aim to reduce this cost by mapping noise to an image in a single step, yet fair comparisons to multi-step systems are difficult because studies use mismatched sampling steps and different classifier-free guidance (CFG) settings, where CFG can shift FID, Inception Score, and CLIP-based alignment in opposing directions. It is also unclear how well one-step models scale to multi-step inference, and there is limited standardized out-of-distribution evaluation for label-ID-conditioned generators beyond ImageNet. To address this, We benchmark eight models spanning one-step flows (MeanFlow, Improved MeanFlow, SoFlow), multi-step baselines (RAE, Scale-RAE), and established systems (SiT, Stable Diffusion 3.5, FLUX.1) under a controlled class-conditional protocol on ImageNet validation, ImageNetV2, and reLAIONet, our new proofread out-of-distribution dataset aligned to ImageNet label IDs. Using FID, Inception Score, CLIP Score, and Pick Score, we show that FID-focused model development and CFG selection can be misleading in few-step regimes, where guidance changes can improve FID while degrading text-image alignment and human preference signals and worsening perceived quality. We further show that leading one-step models benefit from step scaling and become substantially more competitive under multi-step inference, although they still exhibit characteristic local distortions. To capture these tradeoffs, we introduce MinMax Harmonic Mean (MMHM), a composite proxy over all four metrics that stabilizes hyperparameter selection across guidance and step sweeps.

We propose Perceptual Flow Matching (PFM), a simple yet effective framework for few-step generation in flow-matching models. Rather than performing velocity regression in the conventional VAE latent space, PFM supervises flow matching in a perceptual feature space using pretrained perceptual models. This simple change substantially improves the few-step generation capability of flow-matching models, reducing the number of sampling steps from 35-50 to 4-8 while preserving generation quality. Unlike existing acceleration and distillation approaches, PFM requires neither teacher models nor auxiliary score networks and can be integrated into standard flow-matching training pipelines with minimal modifications. Extensive experiments on image generation, video generation, and image editing tasks demonstrate that PFM consistently produces high-quality results while producing fewer artifacts than existing distillation-based methods. We further show that perceptual supervision shifts the regression minimizer from mean-seeking to mode-seeking, biasing predictions toward on-manifold modes that remain accurate under coarse few-step integration. Our results reveal that standard flow-matching training can naturally yield high-quality few-step generators when supervised in an appropriate representation space. We hope this insight inspires future research into representation-aware objectives for efficient generative modeling.

Flow matching has emerged as a promising framework for training generative models, demonstrating impressive empirical performance while offering relative ease of training compared to diffusion-based models. However, this method still requires numerous function evaluations in the sampling process. To address these limitations, we introduce a self-corrected flow distillation method that effectively integrates consistency models and adversarial training within the flow-matching framework. This work is a pioneer in achieving consistent generation quality in both few-step and one-step sampling. Our extensive experiments validate the effectiveness of our method, yielding superior results both quantitatively and qualitatively on CelebA-HQ and zero-shot benchmarks on the COCO dataset. Our implementation is released at https://github.com/VinAIResearch/SCFlow

Diffusion or flow-based models are powerful generative paradigms that are notoriously hard to sample as samples are defined as solutions to high-dimensional Ordinary or Stochastic Differential Equations (ODEs/SDEs) which require a large Number of Function Evaluations (NFE) to approximate well. Existing methods to alleviate the costly sampling process include model distillation and designing dedicated ODE solvers. However, distillation is costly to train and sometimes can deteriorate quality, while dedicated solvers still require relatively large NFE to produce high quality samples. In this paper we introduce "Bespoke solvers", a novel framework for constructing custom ODE solvers tailored to the ODE of a given pre-trained flow model. Our approach optimizes an order consistent and parameter-efficient solver (e.g., with 80 learnable parameters), is trained for roughly 1% of the GPU time required for training the pre-trained model, and significantly improves approximation and generation quality compared to dedicated solvers. For example, a Bespoke solver for a CIFAR10 model produces samples with Fr\'echet Inception Distance (FID) of 2.73 with 10 NFE, and gets to 1% of the Ground Truth (GT) FID (2.59) for this model with only 20 NFE. On the more challenging ImageNet-64times64, Bespoke samples at 2.2 FID with 10 NFE, and gets within 2% of GT FID (1.71) with 20 NFE.

Recent research shows that when Gradient Descent (GD) is applied to neural networks, the loss almost never decreases monotonically. Instead, the loss oscillates as gradient descent converges to its ''Edge of Stability'' (EoS). Here, we find a quantity that does decrease monotonically throughout GD training: the sharpness attained by the gradient flow solution (GFS)-the solution that would be obtained if, from now until convergence, we train with an infinitesimal step size. Theoretically, we analyze scalar neural networks with the squared loss, perhaps the simplest setting where the EoS phenomena still occur. In this model, we prove that the GFS sharpness decreases monotonically. Using this result, we characterize settings where GD provably converges to the EoS in scalar networks. Empirically, we show that GD monotonically decreases the GFS sharpness in a squared regression model as well as practical neural network architectures.

We introduce a new paradigm for generative modeling built on Continuous Normalizing Flows (CNFs), allowing us to train CNFs at unprecedented scale. Specifically, we present the notion of Flow Matching (FM), a simulation-free approach for training CNFs based on regressing vector fields of fixed conditional probability paths. Flow Matching is compatible with a general family of Gaussian probability paths for transforming between noise and data samples -- which subsumes existing diffusion paths as specific instances. Interestingly, we find that employing FM with diffusion paths results in a more robust and stable alternative for training diffusion models. Furthermore, Flow Matching opens the door to training CNFs with other, non-diffusion probability paths. An instance of particular interest is using Optimal Transport (OT) displacement interpolation to define the conditional probability paths. These paths are more efficient than diffusion paths, provide faster training and sampling, and result in better generalization. Training CNFs using Flow Matching on ImageNet leads to consistently better performance than alternative diffusion-based methods in terms of both likelihood and sample quality, and allows fast and reliable sample generation using off-the-shelf numerical ODE solvers.

Continuous-time Consistency Models (CMs) promise efficient few-step generation but face significant challenges with training instability. We argue this instability stems from a fundamental conflict: by training a network to learn only a shortcut across a probability flow, the model loses its grasp on the instantaneous velocity field that defines the flow. Our solution is to explicitly anchor the model in the underlying flow during training. We introduce the Flow-Anchored Consistency Model (FACM), a simple but effective training strategy that uses a Flow Matching (FM) task as an anchor for the primary CM shortcut objective. This Flow-Anchoring approach requires no architectural modifications and is broadly compatible with standard model architectures. By distilling a pre-trained LightningDiT model, our method achieves a state-of-the-art FID of 1.32 with two steps (NFE=2) and 1.76 with just one step (NFE=1) on ImageNet 256x256, significantly outperforming previous methods. This provides a general and effective recipe for building high-performance, few-step generative models. Our code and pretrained models: https://github.com/ali-vilab/FACM.

Denoising Diffusion Probabilistic Models (DDPMs) have garnered popularity for data generation across various domains. However, a significant bottleneck is the necessity for whole-network computation during every step of the generative process, leading to high computational overheads. This paper presents a novel framework, Denoising Diffusion Step-aware Models (DDSM), to address this challenge. Unlike conventional approaches, DDSM employs a spectrum of neural networks whose sizes are adapted according to the importance of each generative step, as determined through evolutionary search. This step-wise network variation effectively circumvents redundant computational efforts, particularly in less critical steps, thereby enhancing the efficiency of the diffusion model. Furthermore, the step-aware design can be seamlessly integrated with other efficiency-geared diffusion models such as DDIMs and latent diffusion, thus broadening the scope of computational savings. Empirical evaluations demonstrate that DDSM achieves computational savings of 49% for CIFAR-10, 61% for CelebA-HQ, 59% for LSUN-bedroom, 71% for AFHQ, and 76% for ImageNet, all without compromising the generation quality. Our code and models will be publicly available.

In machine learning applications, it is well known that carefully designed learning rate (step size) schedules can significantly improve the convergence of commonly used first-order optimization algorithms. Therefore how to set step size adaptively becomes an important research question. A popular and effective method is the Polyak step size, which sets step size adaptively for gradient descent or stochastic gradient descent without the need to estimate the smoothness parameter of the objective function. However, there has not been a principled way to generalize the Polyak step size for algorithms with momentum accelerations. This paper presents a general framework to set the learning rate adaptively for first-order optimization methods with momentum, motivated by the derivation of Polyak step size. It is shown that the resulting methods are much less sensitive to the choice of momentum parameter and may avoid the oscillation of the heavy-ball method on ill-conditioned problems. These adaptive step sizes are further extended to the stochastic settings, which are attractive choices for stochastic gradient descent with momentum. Our methods are demonstrated to be more effective for stochastic gradient methods than prior adaptive step size algorithms in large-scale machine learning tasks.

Fast, geometry-generalizing surrogates for unsteady flow remain challenging. We present a time-dependent, geometry-aware Deep Operator Network that predicts velocity fields for moderate-Re flows around parametric and non-parametric shapes. The model encodes geometry via a signed distance field (SDF) trunk and flow history via a CNN branch, trained on 841 high-fidelity simulations. On held-out shapes, it attains sim 5% relative L2 single-step error and up to 1000X speedups over CFD. We provide physics-centric rollout diagnostics, including phase error at probes and divergence norms, to quantify long-horizon fidelity. These reveal accurate near-term transients but error accumulation in fine-scale wakes, most pronounced for sharp-cornered geometries. We analyze failure modes and outline practical mitigations. Code, splits, and scripts are openly released at: https://github.com/baskargroup/TimeDependent-DeepONet to support reproducibility and benchmarking.

Flow-matching-based text-to-speech (TTS) models, such as Voicebox, E2 TTS, and F5-TTS, have attracted significant attention in recent years. These models require multiple sampling steps to reconstruct speech from noise, making inference speed a key challenge. Reducing the number of sampling steps can greatly improve inference efficiency. To this end, we introduce Fast F5-TTS, a training-free approach to accelerate the inference of flow-matching-based TTS models. By inspecting the sampling trajectory of F5-TTS, we identify redundant steps and propose Empirically Pruned Step Sampling (EPSS), a non-uniform time-step sampling strategy that effectively reduces the number of sampling steps. Our approach achieves a 7-step generation with an inference RTF of 0.030 on an NVIDIA RTX 3090 GPU, making it 4 times faster than the original F5-TTS while maintaining comparable performance. Furthermore, EPSS performs well on E2 TTS models, demonstrating its strong generalization ability.

Recent advances in few-step diffusion models have demonstrated their efficiency and effectiveness by shortcutting the probabilistic paths of diffusion models, especially in training one-step diffusion models from scratch (a.k.a. shortcut models). However, their theoretical derivation and practical implementation are often closely coupled, which obscures the design space. To address this, we propose a common design framework for representative shortcut models. This framework provides theoretical justification for their validity and disentangles concrete component-level choices, thereby enabling systematic identification of improvements. With our proposed improvements, the resulting one-step model achieves a new state-of-the-art FID50k of 2.85 on ImageNet-256x256 under the classifier-free guidance setting with one step generation, and further reaches FID50k of 2.53 with 2x training steps. Remarkably, the model requires no pre-training, distillation, or curriculum learning. We believe our work lowers the barrier to component-level innovation in shortcut models and facilitates principled exploration of their design space.

Diffusion models (DMs) excel in photorealism, image editing, and solving inverse problems, aided by classifier-free guidance and image inversion techniques. However, rectified flow models (RFMs) remain underexplored for these tasks. Existing DM-based methods often require additional training, lack generalization to pretrained latent models, underperform, and demand significant computational resources due to extensive backpropagation through ODE solvers and inversion processes. In this work, we first develop a theoretical and empirical understanding of the vector field dynamics of RFMs in efficiently guiding the denoising trajectory. Our findings reveal that we can navigate the vector field in a deterministic and gradient-free manner. Utilizing this property, we propose FlowChef, which leverages the vector field to steer the denoising trajectory for controlled image generation tasks, facilitated by gradient skipping. FlowChef is a unified framework for controlled image generation that, for the first time, simultaneously addresses classifier guidance, linear inverse problems, and image editing without the need for extra training, inversion, or intensive backpropagation. Finally, we perform extensive evaluations and show that FlowChef significantly outperforms baselines in terms of performance, memory, and time requirements, achieving new state-of-the-art results. Project Page: https://flowchef.github.io.

Majorities of distillation methods on pre-trained diffusion models or on pre-trained rectified flow, focus on either the distillation outputs or the trajectories between random noises and clean images to speed up sample generations from pre-trained models. In those trajectory-based distillation methods, consistency distillation requires the self-consistent trajectory projection to regulate the trajectory, which might avoid the common ODE approximation error {while still be concerning about sampling efficiencies}. At the same time, rectified flow distillations enforce straight trajectory for fast sampling, although an ODE solver is still required. In this work, we propose a trajectory distillation method, \modelname, that enjoys the benefits of both and enables few-step generations. TraFlow adopts the settings of consistency trajectory models, and further enforces the properties of self-consistency and straightness throughout the entire trajectory. These two properties are pursued by reaching a balance with following three targets: (1) reconstruct the output from pre-trained models; (2) learn the amount of changes by pre-trained models; (3) satisfy the self-consistency over its trajectory. Extensive experimental results have shown the effectiveness of our proposed method.

Straightening the probability flow of the continuous-time generative models, such as diffusion models or flow-based models, is the key to fast sampling through the numerical solvers, existing methods learn a linear path by directly generating the probability path the joint distribution between the noise and data distribution. One key reason for the slow sampling speed of the ODE-based solvers that simulate these generative models is the global truncation error of the ODE solver, caused by the high curvature of the ODE trajectory, which explodes the truncation error of the numerical solvers in the low-NFE regime. To address this challenge, We propose a novel method called SeqRF, a learning technique that straightens the probability flow to reduce the global truncation error and hence enable acceleration of sampling and improve the synthesis quality. In both theoretical and empirical studies, we first observe the straightening property of our SeqRF. Through empirical evaluations via SeqRF over flow-based generative models, We achieve surpassing results on CIFAR-10, CelebA-64 times 64, and LSUN-Church datasets.

In this paper, we study how to achieve one-step action generation in Robotic Foundation Models (RFMs), aiming to overcome the high inference latency of multi-step flow matching. MeanFlow provides a promising framework for this goal, yet its direct application leads to performance collapse. We discover that this stems from two distinctive dynamics exhibited in the RFM velocity field: (1) the ``local acceleration" exhibits stability early on, but surges sharply towards the end of the denoising process, and (2) the spread of its magnitudes across samples widens as denoising progresses. To address these issues, we introduce Kinematic MeanFlow (K-MF), a novel one-step action policy tailored for RFMs. Specifically, grounded in a kinematic identity, K-MF decouples the time derivative term in the MeanFlow formulation into two sub-interval terms separated by an intermediate point. This decoupled formulation enables the two terms to capture early-stage and late-stage denoising dynamics, respectively, while mitigating the error amplification across the process. As a result, our K-MF empowers RFMs to achieve one-step action generation in both training from scratch and fine-tuning paradigms across diverse tasks, while outperforming multi-step flow matching in most settings. In terms of inference efficiency, K-MF reduces action-head latency of GR00T-N1.6 by 67.5%~74.4% across L40 and Jetson Orin in eager and compiled modes, yielding end-to-end latency reductions of 30.3%~54.9%. Code will be available at https://github.com/IntelChina-AI/K-MF.

We introduce BézierFlow, a lightweight training approach for few-step generation with pretrained diffusion and flow models. BézierFlow achieves a 2-3x performance improvement for sampling with leq 10 NFEs while requiring only 15 minutes of training. Recent lightweight training approaches have shown promise by learning optimal timesteps, but their scope remains restricted to ODE discretizations. To broaden this scope, we propose learning the optimal transformation of the sampling trajectory by parameterizing stochastic interpolant (SI) schedulers. The main challenge lies in designing a parameterization that satisfies critical desiderata, including boundary conditions, differentiability, and monotonicity of the SNR. To effectively meet these requirements, we represent scheduler functions as Bézier functions, where control points naturally enforce these properties. This reduces the problem to learning an ordered set of points in the time range, while the interpretation of the points changes from ODE timesteps to Bézier control points. Across a range of pretrained diffusion and flow models, BézierFlow consistently outperforms prior timestep-learning methods, demonstrating the effectiveness of expanding the search space from discrete timesteps to Bézier-based trajectory transformations.

Generative machine learning methods, such as diffusion models and flow matching, have shown great potential in modeling complex system behaviors and building efficient surrogate models. However, these methods typically learn the underlying physics implicitly from data. We propose Physics-Based Flow Matching (PBFM), a novel generative framework that explicitly embeds physical constraints, both PDE residuals and algebraic relations, into the flow matching objective. We also introduce temporal unrolling at training time that improves the accuracy of the final, noise-free sample prediction. Our method jointly minimizes the flow matching loss and the physics-based residual loss without requiring hyperparameter tuning of their relative weights. Additionally, we analyze the role of the minimum noise level, sigma_{min}, in the context of physical constraints and evaluate a stochastic sampling strategy that helps to reduce physical residuals. Through extensive benchmarks on three representative PDE problems, we show that our approach yields up to an 8times more accurate physical residuals compared to FM, while clearly outperforming existing algorithms in terms of distributional accuracy. PBFM thus provides a principled and efficient framework for surrogate modeling, uncertainty quantification, and accelerated simulation in physics and engineering applications.

We propose ReinFlow, a simple yet effective online reinforcement learning (RL) framework that fine-tunes a family of flow matching policies for continuous robotic control. Derived from rigorous RL theory, ReinFlow injects learnable noise into a flow policy's deterministic path, converting the flow into a discrete-time Markov Process for exact and straightforward likelihood computation. This conversion facilitates exploration and ensures training stability, enabling ReinFlow to fine-tune diverse flow model variants, including Rectified Flow [35] and Shortcut Models [19], particularly at very few or even one denoising step. We benchmark ReinFlow in representative locomotion and manipulation tasks, including long-horizon planning with visual input and sparse reward. The episode reward of Rectified Flow policies obtained an average net growth of 135.36% after fine-tuning in challenging legged locomotion tasks while saving denoising steps and 82.63% of wall time compared to state-of-the-art diffusion RL fine-tuning method DPPO [43]. The success rate of the Shortcut Model policies in state and visual manipulation tasks achieved an average net increase of 40.34% after fine-tuning with ReinFlow at four or even one denoising step, whose performance is comparable to fine-tuned DDIM policies while saving computation time for an average of 23.20%. Project webpage: https://reinflow.github.io/

We introduce Loop Flow Transformers (LiFT), a family of looped generative models that scales computation by repeatedly applying a shared Diffusion Transformer (DiT) core, with only light changes to the standard architecture. Rather than asking every recurrent step for the final prediction, LiFT trains each step with a single regression target: a point on a straight path from the model's initial estimate to the flow-matching target. Because we index these targets by a continuous depth coordinate, a trained model can loop far beyond its training depth with no retraining, early exits, or other modifications. In our experiments, these longer rollouts improve generation, so inference computation can grow without adding parameters. On ImageNet at 256x256, LiFT-L/2 achieves an FID 3.34 points lower than our dense DiT-XL/2 baseline while using approximately 60% fewer parameters, 32% fewer training FLOPs, and 52% fewer inference FLOPs.

We introduce TurboDiffusion, a video generation acceleration framework that can speed up end-to-end diffusion generation by 100-200x while maintaining video quality. TurboDiffusion mainly relies on several components for acceleration: (1) Attention acceleration: TurboDiffusion uses low-bit SageAttention and trainable Sparse-Linear Attention (SLA) to speed up attention computation. (2) Step distillation: TurboDiffusion adopts rCM for efficient step distillation. (3) W8A8 quantization: TurboDiffusion quantizes model parameters and activations to 8 bits to accelerate linear layers and compress the model. In addition, TurboDiffusion incorporates several other engineering optimizations. We conduct experiments on the Wan2.2-I2V-14B-720P, Wan2.1-T2V-1.3B-480P, Wan2.1-T2V-14B-720P, and Wan2.1-T2V-14B-480P models. Experimental results show that TurboDiffusion achieves 100-200x speedup for video generation even on a single RTX 5090 GPU, while maintaining comparable video quality. The GitHub repository, which includes model checkpoints and easy-to-use code, is available at https://github.com/thu-ml/TurboDiffusion.

We propose Riemannian Flow Matching (RFM), a simple yet powerful framework for training continuous normalizing flows on manifolds. Existing methods for generative modeling on manifolds either require expensive simulation, are inherently unable to scale to high dimensions, or use approximations for limiting quantities that result in biased training objectives. Riemannian Flow Matching bypasses these limitations and offers several advantages over previous approaches: it is simulation-free on simple geometries, does not require divergence computation, and computes its target vector field in closed-form. The key ingredient behind RFM is the construction of a relatively simple premetric for defining target vector fields, which encompasses the existing Euclidean case. To extend to general geometries, we rely on the use of spectral decompositions to efficiently compute premetrics on the fly. Our method achieves state-of-the-art performance on many real-world non-Euclidean datasets, and we demonstrate tractable training on general geometries, including triangular meshes with highly non-trivial curvature and boundaries.

High-fidelity computational fluid dynamics (CFD) is widely used for thermal-fluid design, but repeated CFD solves remain expensive for design optimization, uncertainty analysis, and digital-twin workflows. Recently, our team has demonstrated that a proper orthogonal decomposition and neural-network (POD-NN) surrogate can predict two-dimensional thermal fields in an electronics-cooling cold plate with large inference speedups while preserving physically interpretable modal structure. Reproducing and extending such workflows, however, typically requires custom scripts for parameter sampling, Fluent automation, data extraction, reduced-order model construction, neural-network training, validation, and prediction. This paper introduces CFDTwin, an open-source Python package and optional desktop graphical user interface (GUI) that packages these steps into a reusable workflow for ANSYS Fluent simulations. CFDTwin allows users to define simulation inputs and output quantities, generate design-of-experiments samples, run and resume Fluent batch simulations, train POD-NN surrogate models for scalar, surface-field, and cell-zone outputs, inspect validation metrics, and evaluate trained models at new design points without re-running Fluent. The same workflow is exposed through a scriptable Python API and a GUI, supporting reproducible studies, user-facing model validation, and automated design exploration. CFDTwin extends the prior POD-NN modeling study from a case-specific research implementation to a reusable research-software platform for CFD surrogate modeling and digital-twin development.