new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 18

Cumulative-Goodness Free-Riding in Forward-Forward Networks: Real, Repairable, but Not Accuracy-Dominant

Forward-Forward (FF) training allows each layer to learn from a local goodness criterion. In cumulative-goodness variants, however, later layers can inherit a task that earlier layers have already partially separated. We formalize this phenomenon as layer free-riding: under the softplus FF criterion, the class-discrimination gradient reaching block d decays exponentially with the positive margin accumulated by preceding blocks. We then study three local remedies -- per-block, hardness-gated, and depth-scaled -- that recover current-layer separation measures without relying on backpropagated gradients. On CIFAR-10 and CIFAR-100, these remedies dramatically improve layer-separation statistics, with 4times--45times gains in deeper layers, while changing accuracy by less than one percentage point for non-degenerate training procedures. Tiny ImageNet provides a tougher cross-dataset check for our selected block-wise configuration and reveals the same qualitative gap between layer-health diagnostics and final accuracy. Calibration experiments further show that architecture and augmentation choices have a larger effect on final accuracy than the training-rule modifications studied here. Cumulative free-riding is therefore a real and repairable optimization pathology. Nonetheless, for the FF training rules, architectures, and datasets we study, it is not the dominant factor limiting achievable accuracy.

  • 1 authors
·
May 6

A Controlled Study of Attention-Only Transformers

Feed-forward networks hold two thirds of a transformer's non-embedding parameters, yet the architecture has not received a necessity test that controls parameters, compute, and depth at once. We pretrain attention-only decoder transformers (Simple Attention Networks, SANs) against standard transformers matched separately for parameter count, training FLOPs, and depth (2 to 48 layers), for up to 105B tokens at 6M to 87M parameters. Deleting feed-forward layers in place is costly: the standard transformer leads by 0.47 nats at matched depth and 0.26 nats at matched FLOPs. Reallocating the freed budget into attention depth closes the gap: at matched parameters the difference is 0.006 nats (0.27 percent of loss), reproducible to one part in ten thousand across seed pairs, shrinking across 5B, 30B, and 105B budgets, and holding near 0.02 nats across a 29x size range. Three measurements localize the remaining gap to parametric recall: attention-only models are better on context-grounded answers and worse where knowledge must come from weights. Weight spectra show why: routing matrices (Q/K) crystallize early, content matrices accumulate rank slowly, and removing feed-forward layers relocates this accumulation to the attention output projection. QK-normalization, not feed-forward layers or residual gating, keeps 48-layer attention-only stacks trainable. The deficit concentrates on low-context query prediction and localizes there entirely by the largest budget. A pre-registered test confirms the account: it predicts a 0.02 to 0.05 nat gap on knowledge-dense web text; a matched pair trained on fineweb-edu measures 0.040. Within the tested regime, attention does the rest.

  • 8 authors
·
Jul 19

EUGens: Efficient, Unified, and General Dense Layers

Efficient neural networks are essential for scaling machine learning models to real-time applications and resource-constrained environments. Fully-connected feedforward layers (FFLs) introduce computation and parameter count bottlenecks within neural network architectures. To address this challenge, in this work, we propose a new class of dense layers that generalize standard fully-connected feedforward layers, Efficient, Unified and General dense layers (EUGens). EUGens leverage random features to approximate standard FFLs and go beyond them by incorporating a direct dependence on the input norms in their computations. The proposed layers unify existing efficient FFL extensions and improve efficiency by reducing inference complexity from quadratic to linear time. They also lead to the first unbiased algorithms approximating FFLs with arbitrary polynomial activation functions. Furthermore, EuGens reduce the parameter count and computational overhead while preserving the expressive power and adaptability of FFLs. We also present a layer-wise knowledge transfer technique that bypasses backpropagation, enabling efficient adaptation of EUGens to pre-trained models. Empirically, we observe that integrating EUGens into Transformers and MLPs yields substantial improvements in inference speed (up to 27\%) and memory efficiency (up to 30\%) across a range of tasks, including image classification, language model pre-training, and 3D scene reconstruction. Overall, our results highlight the potential of EUGens for the scalable deployment of large-scale neural networks in real-world scenarios.

  • 10 authors
·
Oct 13, 2024

iLRM: An Iterative Large 3D Reconstruction Model

Feed-forward 3D modeling has emerged as a promising approach for rapid and high-quality 3D reconstruction. In particular, directly generating explicit 3D representations, such as 3D Gaussian splatting, has attracted significant attention due to its fast and high-quality rendering, as well as numerous applications. However, many state-of-the-art methods, primarily based on transformer architectures, suffer from severe scalability issues because they rely on full attention across image tokens from multiple input views, resulting in prohibitive computational costs as the number of views or image resolution increases. Toward a scalable and efficient feed-forward 3D reconstruction, we introduce an iterative Large 3D Reconstruction Model (iLRM) that generates 3D Gaussian representations through an iterative refinement mechanism, guided by three core principles: (1) decoupling the scene representation from input-view images to enable compact 3D representations; (2) decomposing fully-attentional multi-view interactions into a two-stage attention scheme to reduce computational costs; and (3) injecting high-resolution information at every layer to achieve high-fidelity reconstruction. Experimental results on widely used datasets, such as RE10K and DL3DV, demonstrate that iLRM outperforms existing methods in both reconstruction quality and speed. Notably, iLRM exhibits superior scalability, delivering significantly higher reconstruction quality under comparable computational cost by efficiently leveraging a larger number of input views.

  • 6 authors
·
Jul 31, 2025 2

Inception Transformer

Recent studies show that Transformer has strong capability of building long-range dependencies, yet is incompetent in capturing high frequencies that predominantly convey local information. To tackle this issue, we present a novel and general-purpose Inception Transformer, or iFormer for short, that effectively learns comprehensive features with both high- and low-frequency information in visual data. Specifically, we design an Inception mixer to explicitly graft the advantages of convolution and max-pooling for capturing the high-frequency information to Transformers. Different from recent hybrid frameworks, the Inception mixer brings greater efficiency through a channel splitting mechanism to adopt parallel convolution/max-pooling path and self-attention path as high- and low-frequency mixers, while having the flexibility to model discriminative information scattered within a wide frequency range. Considering that bottom layers play more roles in capturing high-frequency details while top layers more in modeling low-frequency global information, we further introduce a frequency ramp structure, i.e. gradually decreasing the dimensions fed to the high-frequency mixer and increasing those to the low-frequency mixer, which can effectively trade-off high- and low-frequency components across different layers. We benchmark the iFormer on a series of vision tasks, and showcase that it achieves impressive performance on image classification, COCO detection and ADE20K segmentation. For example, our iFormer-S hits the top-1 accuracy of 83.4% on ImageNet-1K, much higher than DeiT-S by 3.6%, and even slightly better than much bigger model Swin-B (83.3%) with only 1/4 parameters and 1/3 FLOPs. Code and models will be released at https://github.com/sail-sg/iFormer.

  • 6 authors
·
May 25, 2022

Beyond Backpropagation: Exploring Innovative Algorithms for Energy-Efficient Deep Neural Network Training

The rising computational and energy demands of deep neural networks (DNNs), driven largely by backpropagation (BP), challenge sustainable AI development. This paper rigorously investigates three BP-free training methods: the Forward-Forward (FF), Cascaded-Forward (CaFo), and Mono-Forward (MF) algorithms, tracing their progression from foundational concepts to a demonstrably superior solution. A robust comparative framework was established: each algorithm was implemented on its native architecture (MLPs for FF and MF, a CNN for CaFo) and benchmarked against an equivalent BP-trained model. Hyperparameters were optimized with Optuna, and consistent early stopping criteria were applied based on validation performance, ensuring all models were optimally tuned before comparison. Results show that MF not only competes with but consistently surpasses BP in classification accuracy on its native MLPs. Its superior generalization stems from converging to a more favorable minimum in the validation loss landscape, challenging the assumption that global optimization is required for state-of-the-art results. Measured at the hardware level using the NVIDIA Management Library (NVML) API, MF reduces energy consumption by up to 41% and shortens training time by up to 34%, translating to a measurably smaller carbon footprint as estimated by CodeCarbon. Beyond this primary result, we present a hardware-level analysis that explains the efficiency gains: exposing FF's architectural inefficiencies, validating MF's computationally lean design, and challenging the assumption that all BP-free methods are inherently more memory-efficient. By documenting the evolution from FF's conceptual groundwork to MF's synthesis of accuracy and sustainability, this work offers a clear, data-driven roadmap for future energy-efficient deep learning.

  • 1 authors
·
Sep 23, 2025

MaskNet: Introducing Feature-Wise Multiplication to CTR Ranking Models by Instance-Guided Mask

Click-Through Rate(CTR) estimation has become one of the most fundamental tasks in many real-world applications and it's important for ranking models to effectively capture complex high-order features. Shallow feed-forward network is widely used in many state-of-the-art DNN models such as FNN, DeepFM and xDeepFM to implicitly capture high-order feature interactions. However, some research has proved that addictive feature interaction, particular feed-forward neural networks, is inefficient in capturing common feature interaction. To resolve this problem, we introduce specific multiplicative operation into DNN ranking system by proposing instance-guided mask which performs element-wise product both on the feature embedding and feed-forward layers guided by input instance. We also turn the feed-forward layer in DNN model into a mixture of addictive and multiplicative feature interactions by proposing MaskBlock in this paper. MaskBlock combines the layer normalization, instance-guided mask, and feed-forward layer and it is a basic building block to be used to design new ranking model under various configurations. The model consisting of MaskBlock is called MaskNet in this paper and two new MaskNet models are proposed to show the effectiveness of MaskBlock as basic building block for composing high performance ranking systems. The experiment results on three real-world datasets demonstrate that our proposed MaskNet models outperform state-of-the-art models such as DeepFM and xDeepFM significantly, which implies MaskBlock is an effective basic building unit for composing new high performance ranking systems.

  • 3 authors
·
Feb 9, 2021

GIFSplat: Generative Prior-Guided Iterative Feed-Forward 3D Gaussian Splatting from Sparse Views

Feed-forward 3D reconstruction offers substantial runtime advantages over per-scene optimization, which remains slow at inference and often fragile under sparse views. However, existing feed-forward methods still have potential for further performance gains, especially for out-of-domain data, and struggle to retain second-level inference time once a generative prior is introduced. These limitations stem from the one-shot prediction paradigm in existing feed-forward pipeline: models are strictly bounded by capacity, lack inference-time refinement, and are ill-suited for continuously injecting generative priors. We introduce GIFSplat, a purely feed-forward iterative refinement framework for 3D Gaussian Splatting from sparse unposed views. A small number of forward-only residual updates progressively refine current 3D scene using rendering evidence, achieve favorable balance between efficiency and quality. Furthermore, we distill a frozen diffusion prior into Gaussian-level cues from enhanced novel renderings without gradient backpropagation or ever-increasing view-set expansion, thereby enabling per-scene adaptation with generative prior while preserving feed-forward efficiency. Across DL3DV, RealEstate10K, and DTU, GIFSplat consistently outperforms state-of-the-art feed-forward baselines, improving PSNR by up to +2.1 dB, and it maintains second-scale inference time without requiring camera poses or any test-time gradient optimization.

  • 7 authors
·
Feb 25

Do Language Models Use Their Depth Efficiently?

Modern LLMs are increasingly deep, and depth correlates with performance, albeit with diminishing returns. However, do these models use their depth efficiently? Do they compose more features to create higher-order computations that are impossible in shallow models, or do they merely spread the same kinds of computation out over more layers? To address these questions, we analyze the residual stream of the Llama 3.1 and Qwen 3 family of models. We find: First, comparing the output of the sublayers to the residual stream reveals that layers in the second half contribute much less than those in the first half, with a clear phase transition between the two halves. Second, skipping layers in the second half has a much smaller effect on future computations and output predictions. Third, for multihop tasks, we are unable to find evidence that models are using increased depth to compose subresults in examples involving many hops. Fourth, we seek to directly address whether deeper models are using their additional layers to perform new kinds of computation. To do this, we train linear maps from the residual stream of a shallow model to a deeper one. We find that layers with the same relative depth map best to each other, suggesting that the larger model simply spreads the same computations out over its many layers. All this evidence suggests that deeper models are not using their depth to learn new kinds of computation, but only using the greater depth to perform more fine-grained adjustments to the residual. This may help explain why increasing scale leads to diminishing returns for stacked Transformer architectures.

  • 3 authors
·
May 20, 2025

Investigating the Benefits of Projection Head for Representation Learning

An effective technique for obtaining high-quality representations is adding a projection head on top of the encoder during training, then discarding it and using the pre-projection representations. Despite its proven practical effectiveness, the reason behind the success of this technique is poorly understood. The pre-projection representations are not directly optimized by the loss function, raising the question: what makes them better? In this work, we provide a rigorous theoretical answer to this question. We start by examining linear models trained with self-supervised contrastive loss. We reveal that the implicit bias of training algorithms leads to layer-wise progressive feature weighting, where features become increasingly unequal as we go deeper into the layers. Consequently, lower layers tend to have more normalized and less specialized representations. We theoretically characterize scenarios where such representations are more beneficial, highlighting the intricate interplay between data augmentation and input features. Additionally, we demonstrate that introducing non-linearity into the network allows lower layers to learn features that are completely absent in higher layers. Finally, we show how this mechanism improves the robustness in supervised contrastive learning and supervised learning. We empirically validate our results through various experiments on CIFAR-10/100, UrbanCars and shifted versions of ImageNet. We also introduce a potential alternative to projection head, which offers a more interpretable and controllable design.

  • 5 authors
·
Mar 17, 2024

Priming Base Models for Agentic Post-Training: An Open Midtraining Recipe

Frontier models, general-purpose and domain-specific alike, now include a midtraining stage between pretraining and post-training, but little has been published about how this stage is built. We present an open midtraining recipe that primes base models for agentic post-training, and we show its effectiveness on two Nemotron models of different sizes. Pretraining typically runs at short context and sees almost no agent interactions, while SFT data is mostly synthetic, and very long SFT stages can hurt the model's later RL trainability. Our midtraining stage sits between the two. It trains at 256K context for hundreds of billions of tokens on a diverse mixture of natural software-engineering data like packed repositories, pull requests, commit histories, and build logs together with a small share of agentic traces. On Nemotron 3.5 Lightning, 500B midtraining tokens improve SWE-bench Verified from 60.7 to 64.5, SWE-bench Multilingual from 55.8 to 62.8, and SWE-bench Pro from 32.0 to 35.5 after identical full SFT. On the larger Nemotron 3.5 Super, 280B midtraining tokens improve DeepSWE, a harder benchmark of long-horizon tasks, from 11.7 to 15.7 and SWE-bench Verified from 72.9 to 74.3 after identical full SFT. Midtraining also improves robustness across agent harnesses on both models. We report the ablations behind the recipe and an evaluation protocol built on short fixed SFT runs, since base-model proxy metrics did not correlate reliably with post-training results.

  • 14 authors
·
Oct 15

Probing Transformer Representations Layer by Layer, Module by Module

Which representation should be probed in a transformer-based foundation model? Recent work shows that the standard practice of probing the final layer is often suboptimal, as intermediate layers can provide better features. Yet, representations are still largely studied along depth alone, treating each transformer block as an atomic unit. In this work, we analyze transformer representations layer by layer, module by module. Through more than 144,000 linear probing evaluations of vision foundation models (VFMs) and large language models (LLMs), we show that layer and module choices should be considered jointly: the best layer-module pair yields substantially larger gains over the final-layer residual stream than the best layer with the residual stream fixed. Moreover, module performance can vary substantially across layers, showing that useful representations cannot be characterized by depth alone. Building on these findings, we evaluate simple fixed probing strategies: the final-layer feedforward activation (Act@100) for vision and the second normalization layer at 60% depth (LN2@60) for language. These strategies improve over the probing baseline in a majority of evaluations and recover, on average, 42% and 86% of the gains from probing the best layer-module pair for vision and language, respectively. For VFMs, these gains increase with the transfer difficulty between pretraining and downstream data.

  • 5 authors
·
Nov 7 4

LayerRoPE: Dynamic Depth-wise Magnitude & Angular Superposition

As data propagates through a Transformer, the norm of its hidden states grows by orders of magnitude with depth, a phenomenon framed as 'curse of depth' and nearly universally treated as a pathology to be suppressed. We take the opposite view. Across 16 pre-trained LLMs from 9 families, spanning dense, mixture-of-experts and hybrid architectures and Pre-, Peri- and Post-Norm designs, we find that this growth reflects an emergent depth-positional encoding, carried by the only learned per-layer gain on the residual stream, the normalization weight γ: with depth, γ grows in magnitude and rotates in direction, jointly encoding the layer index. We make this depth-conditioned encoding explicit with LayerRoPE, an implicit analog of RoPE along the depth axis, which replaces all layerwise γ vectors with a single shared vector and depth-conditioned scalars, at a net reduction in parameters and <0.02% change in FLOPs. Across a model ladder scaled up to 100B+ tokens, LayerRoPE consistently outperforms Pre-, Post- and Peri-Norm and Layer-Norm Scaling, reaching Pre-Norm's 1.3B loss with 3.4times less compute; LayerRoPE is the only approach that shows strong convergence and improves near monotonically as depth scales to 512 layers. It improves learning-rate sensitivity by 3-10times, and transfers naively to and consistently improves looped latent models and Vision Transformers. Inspecting its learned schedule inverts the prevailing premise: LayerRoPE does not shrink the residual stream but widens it, damping what each block reads while amplifying what it writes. Depth stability, our results suggest, calls not for suppressing the residual stream, but for depth-conditioned regulation of the computational blocks it feeds.

  • 2 authors
·
Oct 5

Make Deep Networks Shallow Again

Deep neural networks have a good success record and are thus viewed as the best architecture choice for complex applications. Their main shortcoming has been, for a long time, the vanishing gradient which prevented the numerical optimization algorithms from acceptable convergence. A breakthrough has been achieved by the concept of residual connections -- an identity mapping parallel to a conventional layer. This concept is applicable to stacks of layers of the same dimension and substantially alleviates the vanishing gradient problem. A stack of residual connection layers can be expressed as an expansion of terms similar to the Taylor expansion. This expansion suggests the possibility of truncating the higher-order terms and receiving an architecture consisting of a single broad layer composed of all initially stacked layers in parallel. In other words, a sequential deep architecture is substituted by a parallel shallow one. Prompted by this theory, we investigated the performance capabilities of the parallel architecture in comparison to the sequential one. The computer vision datasets MNIST and CIFAR10 were used to train both architectures for a total of 6912 combinations of varying numbers of convolutional layers, numbers of filters, kernel sizes, and other meta parameters. Our findings demonstrate a surprising equivalence between the deep (sequential) and shallow (parallel) architectures. Both layouts produced similar results in terms of training and validation set loss. This discovery implies that a wide, shallow architecture can potentially replace a deep network without sacrificing performance. Such substitution has the potential to simplify network architectures, improve optimization efficiency, and accelerate the training process.

  • 3 authors
·
Sep 15, 2023

From Tokens to Layers: Redefining Stall-Free Scheduling for LLM Serving with Layered Prefill

Large Language Model (LLM) inference in production must meet stringent service-level objectives for both time-to-first-token (TTFT) and time-between-token (TBT) while maximizing throughput under fixed compute, memory, and interconnect budgets. Modern serving systems adopt stall-free scheduling techniques such as chunked prefill, which splits long prompt processing along the token dimension and interleaves prefill with ongoing decode iterations. While effective at stabilizing TBT, chunked prefill incurs substantial overhead in Mixture-of-Experts (MoE) models: redundant expert weight loads increase memory traffic by up to 39% and inflate energy consumption. We propose layered prefill, a new scheduling paradigm that treats transformer layer groups as the primary scheduling unit. By vertically partitioning the model into contiguous layer groups and interleaving prefill and decode across the groups, layered prefill sustains stall-free decoding while eliminating chunk-induced MoE weight reloads. It reduces off-chip bandwidth demand, lowering TTFT by up to 70%, End-to-End latency by 41% and per-token energy by up to 22%. Evaluations show that layered prefill consistently improves the TTFT--TBT Pareto frontier over chunked prefill, reducing expert-load traffic and energy cost while maintaining stall-free decoding. Overall, shifting the scheduling axis from tokens to layers unlocks a new operating regime for high-efficiency, energy-aware LLM serving in co-located environments.

  • 5 authors
·
Oct 9, 2025

Review of Feed-forward 3D Reconstruction: From DUSt3R to VGGT

3D reconstruction, which aims to recover the dense three-dimensional structure of a scene, is a cornerstone technology for numerous applications, including augmented/virtual reality, autonomous driving, and robotics. While traditional pipelines like Structure from Motion (SfM) and Multi-View Stereo (MVS) achieve high precision through iterative optimization, they are limited by complex workflows, high computational cost, and poor robustness in challenging scenarios like texture-less regions. Recently, deep learning has catalyzed a paradigm shift in 3D reconstruction. A new family of models, exemplified by DUSt3R, has pioneered a feed-forward approach. These models employ a unified deep network to jointly infer camera poses and dense geometry directly from an Unconstrained set of images in a single forward pass. This survey provides a systematic review of this emerging domain. We begin by dissecting the technical framework of these feed-forward models, including their Transformer-based correspondence modeling, joint pose and geometry regression mechanisms, and strategies for scaling from two-view to multi-view scenarios. To highlight the disruptive nature of this new paradigm, we contrast it with both traditional pipelines and earlier learning-based methods like MVSNet. Furthermore, we provide an overview of relevant datasets and evaluation metrics. Finally, we discuss the technology's broad application prospects and identify key future challenges and opportunities, such as model accuracy and scalability, and handling dynamic scenes.

  • 7 authors
·
Jul 11, 2025

NoProp: Training Neural Networks without Back-propagation or Forward-propagation

The canonical deep learning approach for learning requires computing a gradient term at each layer by back-propagating the error signal from the output towards each learnable parameter. Given the stacked structure of neural networks, where each layer builds on the representation of the layer below, this approach leads to hierarchical representations. More abstract features live on the top layers of the model, while features on lower layers are expected to be less abstract. In contrast to this, we introduce a new learning method named NoProp, which does not rely on either forward or backwards propagation. Instead, NoProp takes inspiration from diffusion and flow matching methods, where each layer independently learns to denoise a noisy target. We believe this work takes a first step towards introducing a new family of gradient-free learning methods, that does not learn hierarchical representations -- at least not in the usual sense. NoProp needs to fix the representation at each layer beforehand to a noised version of the target, learning a local denoising process that can then be exploited at inference. We demonstrate the effectiveness of our method on MNIST, CIFAR-10, and CIFAR-100 image classification benchmarks. Our results show that NoProp is a viable learning algorithm which achieves superior accuracy, is easier to use and computationally more efficient compared to other existing back-propagation-free methods. By departing from the traditional gradient based learning paradigm, NoProp alters how credit assignment is done within the network, enabling more efficient distributed learning as well as potentially impacting other characteristics of the learning process.

  • 3 authors
·
Mar 31, 2025

Skip a Layer or Loop it? Test-Time Depth Adaptation of Pretrained LLMs

Can a pretrained neural network adapt its architecture to different inputs without any finetuning? Do we need all layers for simple tasks, and are they adequate for challenging tasks? We found that the layers of a pretrained large language model (LLM) can be manipulated as separate modules to build a better and even shallower model customized for each test sample. In particular, each layer from the pretrained model can be skipped/pruned or repeated multiple times as recurrent neural networks (RNN), and stacked with others in arbitrary orders, yielding a chain-of-layers (CoLa) per sample. This compositional space greatly expands the scope of existing works on looped/recurrent pretrained modules, layer pruning, or early-exit networks. We develop a Monte Carlo Tree Search (MCTS) protocol to explore and identify the optimal CoLa for each sample from math and commonsense reasoning benchmarks. Compared to a static model of a fixed depth, CoLa allows shortcut paths (fast thinking), recurrence of the same layer(s) (slow thinking), and combining both, offering more flexible, dynamic architectures for different inputs. We conduct an extensive analysis of the MCTS-optimized CoLa, which leads to two key findings: (1) For >75% of samples with correct predictions by the original LLM, we can find shorter CoLa, suggesting a large space for improving inference efficiency; (2) For >60% of samples with originally incorrect predictions, we can identify CoLa achieving correct predictions, suggesting a large space of performance enhancement. Our results highlight the shortcomings of using a fixed architecture of pre-trained LLMs for inference on different samples and pave the way to unlock the generalization power of test-time depth adaptation.

  • 3 authors
·
Jul 10, 2025 15

Transformers with Selective Access to Early Representations

Several recent Transformer architectures expose later layers to representations computed in the earliest layers, motivated by the observation that low-level features can become harder to recover as the residual stream is repeatedly transformed through depth. The cheapest among these methods add static value residuals: learned mixing coefficients that expose the first-layer value projection V_1 uniformly across tokens and heads. More expressive dense or dynamic alternatives recover finer-grained access, but at higher memory cost and lower throughput. The usefulness of V_1 is unlikely to be constant across tokens, heads, and contexts; different positions plausibly require different amounts of access to early lexical or semantic information. We therefore treat early-representation reuse as a retrieval problem rather than a connectivity problem, and introduce Selective Access Transformer (SATFormer), which preserves the first-layer value pathway while controlling access with a context-dependent gate. Across models from 130M to 1.3B parameters, SATFormer consistently improves validation loss and zero-shot accuracy over the static value-residual and Transformer baselines. Its strongest gains appear on retrieval-intensive benchmarks, where it improves over static value residuals by approximately 1.5 average points, while maintaining throughput and memory usage close to the baseline Transformer. Gate analyses suggest sparse, depth-dependent, head-specific, and category-sensitive access patterns, supporting the interpretation that SATFormer learns selective reuse of early representations rather than uniform residual copying. Our code is available at https://github.com/SkyeGunasekaran/SATFormer.

  • 4 authors
·
May 5

CMT: Mid-Training for Efficient Learning of Consistency, Mean Flow, and Flow Map Models

Flow map models such as Consistency Models (CM) and Mean Flow (MF) enable few-step generation by learning the long jump of the ODE solution of diffusion models, yet training remains unstable, sensitive to hyperparameters, and costly. Initializing from a pre-trained diffusion model helps, but still requires converting infinitesimal steps into a long-jump map, leaving instability unresolved. We introduce mid-training, the first concept and practical method that inserts a lightweight intermediate stage between the (diffusion) pre-training and the final flow map training (i.e., post-training) for vision generation. Concretely, Consistency Mid-Training (CMT) is a compact and principled stage that trains a model to map points along a solver trajectory from a pre-trained model, starting from a prior sample, directly to the solver-generated clean sample. It yields a trajectory-consistent and stable initialization. This initializer outperforms random and diffusion-based baselines and enables fast, robust convergence without heuristics. Initializing post-training with CMT weights further simplifies flow map learning. Empirically, CMT achieves state of the art two step FIDs: 1.97 on CIFAR-10, 1.32 on ImageNet 64x64, and 1.84 on ImageNet 512x512, while using up to 98% less training data and GPU time, compared to CMs. On ImageNet 256x256, CMT reaches 1-step FID 3.34 while cutting total training time by about 50% compared to MF from scratch (FID 3.43). This establishes CMT as a principled, efficient, and general framework for training flow map models.

  • 4 authors
·
Sep 29, 2025

Feed-Forward 3D Scene Modeling: A Problem-Driven Perspective

Reconstructing 3D representations from 2D inputs is a fundamental task in computer vision and graphics, serving as a cornerstone for understanding and interacting with the physical world. While traditional methods achieve high fidelity, they are limited by slow per-scene optimization or category-specific training, which hinders their practical deployment and scalability. Hence, generalizable feed-forward 3D reconstruction has witnessed rapid development in recent years. By learning a model that maps images directly to 3D representations in a single forward pass, these methods enable efficient reconstruction and robust cross-scene generalization. Our survey is motivated by a critical observation: despite the diverse geometric output representations, ranging from implicit fields to explicit primitives, existing feed-forward approaches share similar high-level architectural patterns, such as image feature extraction backbones, multi-view information fusion mechanisms, and geometry-aware design principles. Consequently, we abstract away from these representation differences and instead focus on model design, proposing a novel taxonomy centered on model design strategies that are agnostic to the output format. Our proposed taxonomy organizes the research directions into five key problems that drive recent research development: feature enhancement, geometry awareness, model efficiency, augmentation strategies and temporal-aware models. To support this taxonomy with empirical grounding and standardized evaluation, we further comprehensively review related benchmarks and datasets, and extensively discuss and categorize real-world applications based on feed-forward 3D models. Finally, we outline future directions to address open challenges such as scalability, evaluation standards, and world modeling.

Programs-of-Layers in LLMs through the Lens of Cortical Areas

Inference in LLMs is conventionally a fixed-depth, fixed-order forward pass through every layer, regardless of how difficult the input is. The human brain does not work this way: using the thalamus as a central hub, it routes information flexibly to all regions of the cortex according to demand. Li et al. (2026) recently showed, with a system they call program-of-layers (PoLar), that transformers can be given an analogous flexibility if their layers are treated as a library of functions rather than a fixed sequence. Performance improves over the standard forward pass when each input is dynamically routed through an adaptive sequence of skipped or repeated contiguous layer blocks. We reconstructed PoLar's diagnostic MCTS in more detail than the original paper and applied it across 5 models. We reproduced several of PoLar's findings: skipping outperformed the standard pass, repeating outperformed skipping, and combining both outperformed either alone. Shorter programs sufficed for easier questions, while harder questions required more layer repeats. However, we failed to replicate the main claim regarding their learned router for single-shot inference: its top-ranked prediction consistently collapsed back to the standard pass, even though its top-k predicted programs, taken together, did show a real accuracy gain. Beyond reproduction, we find that a small number of generic programs are enough to solve most of the questions. We also provide a much deeper analysis of these programs' structure and robustness: for example, we found that programs that correct errors are highly brittle: undoing even a single edit inside a program typically breaks the correction. Connecting this to the brain's routing mechanisms, PoLar mirrors principles of thalamo-cortical coordination between cortical-area-like transformer layers. We publicly release the code at https://datexis.github.io/RE-PoLar/

  • 5 authors
·
Sep 25

HiPrune: Training-Free Visual Token Pruning via Hierarchical Attention in Vision-Language Models

Vision-Language Models (VLMs) encode images into lengthy sequences of visual tokens, leading to excessive computational overhead and limited inference efficiency. While prior efforts prune or merge tokens to address this issue, they often rely on special tokens (e.g., CLS) or require task-specific training, hindering scalability across architectures. In this paper, we propose HiPrune, a training-free and model-agnostic token Pruning framework that exploits the Hierarchical attention structure within vision encoders. We identify that middle layers attend to object-centric regions, while deep layers capture global contextual features. Based on this observation, HiPrune selects three types of informative tokens: (1) Anchor tokens with high attention in object-centric layers, (2) Buffer tokens adjacent to anchors for spatial continuity, and (3) Register tokens with strong attention in deep layers for global summarization. Our method requires no retraining and integrates seamlessly with any ViT-based VLM. Extensive experiments on LLaVA-1.5, LLaVA-NeXT, and Qwen2.5-VL demonstrate that HiPrune achieves state-of-the-art pruning performance, preserving up to 99.3% task accuracy with only 33.3% tokens, and maintaining 99.5% accuracy with just 11.1% tokens. Meanwhile, it reduces inference FLOPs and latency by up to 9times, showcasing strong generalization across models and tasks. Code is available at https://github.com/Danielement321/HiPrune.

  • 6 authors
·
Aug 1, 2025

Late-to-Early Training: LET LLMs Learn Earlier, So Faster and Better

As Large Language Models (LLMs) achieve remarkable empirical success through scaling model and data size, pretraining has become increasingly critical yet computationally prohibitive, hindering rapid development. Despite the availability of numerous pretrained LLMs developed at significant computational expense, a fundamental real-world question remains underexplored: Can we leverage existing small pretrained models to accelerate the training of larger models? In this paper, we propose a Late-to-Early Training (LET) paradigm that enables LLMs to explicitly learn later knowledge in earlier steps and earlier layers. The core idea is to guide the early layers of an LLM during early training using representations from the late layers of a pretrained (i.e. late training phase) model. We identify two key mechanisms that drive LET's effectiveness: late-to-early-step learning and late-to-early-layer learning. These mechanisms significantly accelerate training convergence while robustly enhancing both language modeling capabilities and downstream task performance, enabling faster training with superior performance. Extensive experiments on 1.4B and 7B parameter models demonstrate LET's efficiency and effectiveness. Notably, when training a 1.4B LLM on the Pile dataset, our method achieves up to 1.6times speedup with nearly 5\% improvement in downstream task accuracy compared to standard training, even when using a pretrained model with 10times fewer parameters than the target model.

Cross-Model KV Cache Transfer in LLM Families: A Closed-Form Linear Mapping for Prefill Reuse

Production deployments often swap between different-sized models in a family for cost-quality cascading, mid-conversation switching, and routing, and each swap forces the receiver to repay the prefill from scratch. We propose cross-model KV cache transfer, where the receiver reuses the source's KV cache, skipping prefill. We find that cross-model KV has substantial linear structure across matched-KV pairs, where source and target share KV head count and per-head dimension. On Qwen3 14B->32B, one source layer explains 56% of variance in the target's keys and 32% in values, rising to 79% and 65% with multiple source layers. Building on this, we design a closed-form ridge mapper that operates per head and proceeds in three steps. First, for each target layer we select the top-k most predictive source layers and concatenate their KV as input. Second, we strip RoPE from the keys before mapping, so the fit is position-free and reusable across context lengths. Third, we fit ridge regression on a small calibration set of 500 FineWeb-Edu sequences of 1,024 tokens each. Surprisingly, across six pairs in three families, this linear mapper retains 73-98% of the receiver's standalone-prefill accuracy on four pairs, while two degrade sharply. A nonlinear MLP recovers up to +37 pp HellaSwag retention on the failures. The mapper runs 2.7-25x faster than re-prefill and remains stable across multi-turn handoff, making cross-model KV cache transfer practical.

  • 9 authors
·
Aug 3

Don't Drop Dropout: Optimizing Layer Sparsity for Efficient LLM Training and Inference

Layer dropout (a.k.a. stochastic depth) has been shown to enable faster training, higher accuracy, and robustness to zero-shot layer pruning in both language and vision transformers. However, as models and datasets have scaled, dropout - particularly layer dropout - has largely disappeared from large language models (LLMs) pre-training recipes. While some prior work has reported that dropout can degrade accuracy, no comprehensive study has quantified, let alone mitigated, this effect. In this study, we show that layer dropout should be used in state-of-the-art LLM training, establishing best practices and scaling analysis for both training and post-training benefits. Concretely, with optimal layer distribution, time schedule, and optimizer hyperparameters, we observe that at the same training FLOPs layer dropout leads to lower loss. For a given number of training steps, LLMs can achieve lower or similar validation loss while saving upto 25% of training FLOPs. Moreover, layer dropout enables significant post-training optimizations, such as early exit, intermediate-layer skipping, and self-speculative decoding, yielding up to 1.5x inference speedup with negligible accuracy loss. Across more than 2400 training experiments, spanning models from 271M to 8.2B parameters and datasets up to 160B tokens, we demonstrate that these findings extend reliably to large-scale training regimes. All pre-training experiments were run on Cerebras CS-3 systems.

cerebras Cerebras
·
Sep 3 2

Bounded Hyperbolic Tangent: A Stable and Efficient Alternative to Pre-Layer Normalization in Large Language Models

Pre-Layer Normalization (Pre-LN) is the de facto choice for large language models (LLMs) and is crucial for stable pretraining and effective transfer learning. However, Pre-LN is inefficient due to repeated statistical calculations and suffers from the curse of depth. As layers grow, the magnitude and variance of the hidden state escalate, destabilizing training. Efficiency-oriented normalization-free methods such as Dynamic Tanh (DyT) improve speed but remain fragile at depth. To jointly address stability and efficiency, we propose Bounded Hyperbolic Tanh (BHyT), a drop-in replacement for Pre-LN. BHyT couples a tanh nonlinearity with explicit, data-driven input bounding to keep activations within a non-saturating range. It prevents depth-wise growth in activation magnitude and variance and comes with a theoretical stability guarantee. For efficiency, BHyT computes exact statistics once per block and replaces a second normalization with a lightweight variance approximation, enhancing efficiency. Empirically, BHyT demonstrates improved stability and efficiency during pretraining, achieving an average of 15.8% faster training and an average of 4.2% higher token generation throughput compared to RMSNorm., while matching or surpassing its inference performance and robustness across language understanding and reasoning benchmarks. Our code is available at: https://anonymous.4open.science/r/BHyT

  • 5 authors
·
Dec 26, 2025

Retrieval-Centric Deep Learning in Growing Nonparametric Neural Networks

We investigate a general-purpose layer for deep learning that, instead of compressing arbitrary-size training data into fixed-size weight matrices, stores a new pair of key-value representations for every data point during training, and retrieves and recombines these representations through an attention mechanism at inference time - resulting in a growing neural net (NN). While Irie et al. (arXiv:2202.05798) have put forward this perspective from the classic duality expressing any linear layer in a deep NN trained by gradient descent as linear attention (LA) over the training data points, replacing LA by more powerful attention functions, as they suggest, turns out to be non-trivial: we show that naively applying learning rules from the LA case to advanced kernels does not lead to principled optimization. Here we fill this gap and develop functional gradient-based learning rules for kernelized attention layers, based on radial basis function (RBF) and softmax-like kernels - establishing the principled "retrieval-centric deep learning" (RCDL) paradigm. Empirically, we demonstrate the promising performance and learning-efficiency of RCDL on image classification and synthetic teacher-student learning tasks. Moreover, we show that replacing LA in the dual form of NNs by advanced LA variants, namely MesaNet/DeltaNet, yields a formal connection to recently proposed optimizers for conventional fixed-size NNs, offering a novel perspective on deep learning optimization.

google Google
·
Oct 1 2

Understanding Is Done Early: A Depth Division of Labor in Large Language Models and Its Use for Unbounded-Context Memory

Transformer depth is not used uniformly: lower and middle layers build semantic representations, while upper layers increasingly specialize them for prediction. We turn this division of labor into CoMem (Comprehension Memory), which writes each context chunk only through an intermediate layer, retrieves a fixed number of cached residual states, and recomputes the query-conditioned upper layers over the resulting pack. For a fixed retrieval budget, model-side read compute and memory are independent of stored-context length. We evaluate a continued-trained Qwen3-8B base LM under a unified chat-template-free protocol. The backbone is frozen; the flagship trains only a rank-32 self-distillation LoRA on plain PG19, and we report an adapter-free arm separately. CoMem reaches 97.05 on RULER and 38.27 on LoCoMo versus 34.59 for full-context KV-Direct; the dialogue-memory advantage survives conversation-cluster resampling and an independent judge. Results on additional long-context and long-document tasks expose both the benefits of bounded retrieval and its in-window compression tax. Controlled depth sweeps show that deeper caching lowers per-query recomputation but incurs a fidelity loss that self-distillation substantially repairs. In a separate adapter-free efficiency control on an NVIDIA H20 at 128k, CoMem uses 18.26 GB rather than 89.36 GB and achieves a 7.83x prefill speedup. These results show that long-context memory can be organized along the layer axis, not only the token axis.

  • 9 authors
·
Jul 29

ARLoop: Fully-Open Pre-trained Looped Transformers with Attention Residuals

Looped transformers increase effective depth by repeatedly applying a shared set of transformer layers, offering a parameter-efficient way to scale computation. However, standard residual connections aggregate information across recurrent depth into a single stream, providing limited control over which intermediate representations from preceding layers should be reused. In this paper, we introduce ARLoop, a looped transformer architecture based on attention residuals, where the input of each layer is selectively aggregated through attention over model depth. Distinct from standard transformers, we find that looped transformers do not require access to the full residual history: sliding-window depth attention matches or outperforms full-history attention at larger recurrent depths. Across controlled experiments with multiple parameter scales (140M and 370M) and recurrent depths (R = 1 to 5), ARLoop consistently outperforms prior residual designs for looped transformers. More importantly, we further scale ARLoop to 0.6B and 1.2B parameters under a realistic LLM pretraining recipe, demonstrating that the gains transfer to realistic pretraining, with particularly strong improvements on math and coding tasks. Our 1.2B model, pretrained on only 0.5T tokens with three recurrences, outperforms Huginn-3.5B (the only fully-open looped LLM as of our release date) across all evaluated tasks and is competitive with similar-sized non-looped models such as Qwen3.5-2B despite being trained on substantially less data.

  • 4 authors
·
Nov 2

Depth Memory

Residual connections propagate information through a network by additively accumulating layer outputs. Recently proposed alternatives, such as Manifold-Constrained Hyper-Connections (mHC) and Attention Residuals (AttnRes), instead use more expressive depth aggregation mechanisms that improve language modeling performance at scale. In this work, we consider the mixing of representations over depth as a problem of storing and retrieving information across layers. Formalizing this perspective, we introduce Depth Memory (DM), a unified framework that describes the standard pre-layer-norm (PreLN) transformer, mHC, and AttnRes in terms of streams that carry representations through the network. One such stream, for example, could be an explicit memory stream that is queried to enrich the input to every layer, and whose output is subsequently written back into the memory for use by later layers. For AttnRes, this memory stream is a growing cache of explicit layer representations. For mHC, it is an expanded residual stream. Building on this view, we propose Linear Depth Memory (LDM), which formulates information retrieval across depth as a regression problem solved using recursive least squares. The resulting architecture propagates three streams across depth: the standard residual stream, a linear associative memory stream, and an inverse covariance stream. For high-throughput training and inference, we propose a hardware-aware implementation of LDM that reduces peak activation memory and memory traffic. LDM consistently achieves the lowest perplexities among PreLN, mHC and AttnRes baselines at the 400M and 1.5B parameter scales, alongside competitive zero-shot accuracy.

  • 4 authors
·
Oct 12

Adding Gradient Noise Improves Learning for Very Deep Networks

Deep feedforward and recurrent networks have achieved impressive results in many perception and language processing applications. This success is partially attributed to architectural innovations such as convolutional and long short-term memory networks. The main motivation for these architectural innovations is that they capture better domain knowledge, and importantly are easier to optimize than more basic architectures. Recently, more complex architectures such as Neural Turing Machines and Memory Networks have been proposed for tasks including question answering and general computation, creating a new set of optimization challenges. In this paper, we discuss a low-overhead and easy-to-implement technique of adding gradient noise which we find to be surprisingly effective when training these very deep architectures. The technique not only helps to avoid overfitting, but also can result in lower training loss. This method alone allows a fully-connected 20-layer deep network to be trained with standard gradient descent, even starting from a poor initialization. We see consistent improvements for many complex models, including a 72% relative reduction in error rate over a carefully-tuned baseline on a challenging question-answering task, and a doubling of the number of accurate binary multiplication models learned across 7,000 random restarts. We encourage further application of this technique to additional complex modern architectures.

  • 7 authors
·
Nov 20, 2015

Linear Attention Architectures: Mechanisms, Trade-offs, and Cross-Layer Routing

Self-attention lets each token retrieve information from the full context, but its quadratic cost in sequence length limits training and inference at long context. This paper presents a comparative study of softmax attention and four recent recurrent linear-attention architectures: DeltaNet, Gated DeltaNet, Kimi Delta Attention, and Gated DeltaNet-2. We express these mechanisms in a common recurrent-memory notation, making explicit how they differ in expressivity, memory decay, erase and write control, training throughput, and implementation complexity. Our experiments center on 350M-parameter models trained for 15B tokens, and include optimizer and learning-rate comparisons, hybrid-versus-pure stack comparisons, sequence-length runtime measurements, larger DeltaNet runs at 1.3B and 3B parameters, and a small set of downstream evaluations. The reported speed results measure training throughput and iteration time; we do not provide an empirical inference-speed benchmark. Within the reported 350M-parameter, 15B-token sweep, Kimi Delta Attention with Muon reaches the lowest final validation loss, a pure Gated DeltaNet stack trained with AdamW has the highest normalized training throughput, hybrid stacks generally improve loss at a throughput cost, and Muon consistently lowers final validation loss relative to AdamW in the matched architecture settings we evaluate. We introduce and evaluate lightweight cross-layer routing mechanisms for DeltaNet-style memories. The most natural DeltaNet-inspired formulation, forwarding a lower layer's delta-rule write error into the next layer's value target, does not improve over matched baselines. Routing into the aligned hidden stream and forwarding the write value instead yields a modest improvement in the matched runs we report: Cross-Layer Value Routing (CLVR) lowers final validation loss for both DeltaNet and Gated DeltaNet.

ethz ETH Zurich
·
Jul 7 2

FiRST: Finetuning Router-Selective Transformers for Input-Adaptive Latency Reduction

Auto-regressive Large Language Models (LLMs) demonstrate remarkable performance across different domains such as vision and language processing. However, due to sequential processing through a stack of transformer layers, autoregressive decoding faces significant computation/latency challenges, particularly in resource-constrained environments like mobile and edge devices. Existing approaches in literature that aim to improve latency via skipping layers have two distinct flavors - 1) Early exit, and 2) Input-agnostic heuristics where tokens exit at pre-determined layers irrespective of input sequence. Both the above strategies have limitations - the former cannot be applied to handle KV Caching necessary for speed-ups in modern framework and the latter does not capture the variation in layer importance across tasks or more generally, across input sequences. To address both limitations, we propose FiRST, an algorithm that reduces inference latency by using layer-specific routers to select a subset of transformer layers adaptively for each input sequence - the prompt (during the prefill stage) decides which layers will be skipped during decoding. FiRST preserves compatibility with KV caching enabling faster inference while being quality-aware. FiRST is model-agnostic and can be easily enabled on any pre-trained LLM. Our approach reveals that input adaptivity is critical - indeed, different task-specific middle layers play a crucial role in evolving hidden representations depending on tasks. Extensive experiments show that FiRST significantly reduces latency while outperforming other layer selection strategies in quality metics. It retains competitive performance to base model (without layer skipping) and in some cases, even improves upon it. FiRST is thus a promising and efficient solution for LLM deployment in low-resource environments.

  • 4 authors
·
Oct 16, 2024

DepthBench: Measuring How Residual Connections Enable More Computational Depth

Depth is a natural way to increase the computational capacity in Transformers, yet the contribution of deeper layers can diminish as depth grows larger. Recent approaches enhance normalization (e.g., LayerNorm Scaling) or residual connections (e.g., mHC, AttnRes) to enable better information flow and depth utilization. However, it remains unclear whether they truly translate increased architectural depth into effective computational depth, and whether their reported gains stem from better access to information across depth, or unaccounted-for confounding factors. In this paper, we introduce DepthBench, a controlled benchmark for studying computational depth across various architectures. We systematically vary the width--depth aspect ratio (d_{model}/n_{layer}) from shallow--wide to deep--narrow shapes, while keeping the model size and pre-training recipe fixed. Across 10 representative architectures, we find that the benefit of allocating more capacity to depth is strongly architecture-dependent. Standard Pre-LN and most of its norm- and scaling-based variants provide little benefit and can even degrade performance as models become deeper and narrower, whereas HC and Full AttnRes improve consistently even at extreme deep shapes. These gains extend beyond pre-training loss and consistently translate into improved domain-specific performance and effective computation. Controlled layer-level analyses further show that the gains of HC and Full AttnRes are associated with more effective utilization of additional layers, revealing distinct mechanisms of computational depth across architectures. Overall, our results identify residual connection design as a key determinant of whether depth can serve as a meaningful scaling axis by enabling additional architectural depth to translate into effective computation.

Mix3R: Mixing Feed-forward Reconstruction and Generative 3D Priors for Joint Multi-view Aligned 3D Reconstruction and Pose Estimation

Recent trends in sparse-view 3D reconstruction have taken two different paths: feed-forward reconstruction that predicts pixel-aligned point maps without a complete geometry, and generative 3D reconstruction that generates complete geometry but often with poor input-alignment. We present Mix3R, a novel generative 3D reconstruction method which mixes feed-forward reconstruction and 3D generation into a single framework in an aligned manner. Mix3R generates a 3D shape in two stages: a sparse voxel generation stage and a textured geometry generation stage. Unlike pure generative methods, our first-stage generation jointly produces a coarse 3D structure (sparse voxels), per-view point maps and camera parameters aligned to that 3D structure. This is made possible by introducing a Mixture-of-Transformers architecture that inserts global self-attentions to a feed-forward reconstruction model and a 3D generative model, both pretrained on large-scale data. This design effectively retains the pretrained priors but enables better 2D-3D alignment. Based on the initial aligned generations of sparse 3D voxels and point maps, we compute an overlap-based attention bias that is directly added to another pretrained textured geometry generation model, enabling it to correctly place input textures onto generated shapes in a training-free manner. Our design brings mutual benefits to both feed-forward reconstruction and 3D generation: The feed-forward branch learns to ground its predictions to a generative 3D prior, and conversely, the 3D generation branch is conditioned on geometrically informative features from the feed-forward branch. As a result, our method produces 3D shapes with better input alignment compared with pure 3D generative methods, together with camera pose estimations more accurate than previous feed-forward reconstruction methods. Our project page is at https://jsnln.github.io/mix3r/

  • 7 authors
·
May 4

Attention Residuals

Residual connections with PreNorm are standard in modern LLMs, yet they accumulate all layer outputs with fixed unit weights. This uniform aggregation causes uncontrolled hidden-state growth with depth, progressively diluting each layer's contribution. We propose Attention Residuals (AttnRes), which replaces this fixed accumulation with softmax attention over preceding layer outputs, allowing each layer to selectively aggregate earlier representations with learned, input-dependent weights. To address the memory and communication overhead of attending over all preceding layer outputs for large-scale model training, we introduce Block AttnRes, which partitions layers into blocks and attends over block-level representations, reducing the memory footprint while preserving most of the gains of full AttnRes. Combined with cache-based pipeline communication and a two-phase computation strategy, Block AttnRes becomes a practical drop-in replacement for standard residual connections with minimal overhead. Scaling law experiments confirm that the improvement is consistent across model sizes, and ablations validate the benefit of content-dependent depth-wise selection. We further integrate AttnRes into the Kimi Linear architecture (48B total / 3B activated parameters) and pre-train on 1.4T tokens, where AttnRes mitigates PreNorm dilution, yielding more uniform output magnitudes and gradient distribution across depth, and improves downstream performance across all evaluated tasks.

moonshotai Moonshot AI
·
Mar 16 6

EntroPrefill: Renyi-Guided Context Pruning with Conditional Stability Guarantees for Retrieval-Augmented Generation

Mid-prefill pruning can reduce the sequence processed by deeper transformer layers, but attention concentration alone does not certify that discarded context is dispensable. We formulate EntroPrefill as a Renyi-guided proposal mechanism coupled to explicit constraints on discarded attention mass. Sink-isolated, regularized head pooling respects grouped-query attention while exposing a quantitative trade-off between specialization and worst-head coverage. We derive a mixture-to-head deletion envelope, a computable upper bound on feasible token removal, and a finite-sample observer guarantee that remains valid when the pruning layer is selected adaptively. We then establish a conditional transformer perturbation bound with explicit sufficient Lipschitz constants and a first-token decision-margin corollary. A counterexample shows why shallow observations alone cannot imply an unconditional future-output guarantee. The systems analysis distinguishes query-head unions, physical page allocation, and KV-transfer payload, and gives an arithmetic break-even condition for pruning. This manuscript is theoretical in scope: it defines the procedure, its assumptions, and its formal limits, but does not report measured acceleration or task-accuracy preservation. Experiments are reserved for subsequent validation of the assumptions, approximation tightness, and end-to-end resource trade-offs.

  • 1 authors
·
Oct 6

Rethinking the shape convention of an MLP

Multi-layer perceptrons (MLPs) conventionally follow a narrow-wide-narrow design where skip connections operate at the input/output dimensions while processing occurs in expanded hidden spaces. We challenge this convention by proposing wide-narrow-wide (Hourglass) MLP blocks where skip connections operate at expanded dimensions while residual computation flows through narrow bottlenecks. This inversion leverages higher-dimensional spaces for incremental refinement while maintaining computational efficiency through parameter-matched designs. Implementing Hourglass MLPs requires an initial projection to lift input signals to expanded dimensions. We propose that this projection can remain fixed at random initialization throughout training, enabling efficient training and inference implementations. We evaluate both architectures on generative tasks over popular image datasets, characterizing performance-parameter Pareto frontiers through systematic architectural search. Results show that Hourglass architectures consistently achieve superior Pareto frontiers compared to conventional designs. As parameter budgets increase, optimal Hourglass configurations favor deeper networks with wider skip connections and narrower bottlenecks-a scaling pattern distinct from conventional MLPs. Our findings suggest reconsidering skip connection placement in modern architectures, with potential applications extending to Transformers and other residual networks.

MediaTek-Research MediaTek Research
·
Oct 2, 2025 2

Attention Saturation and Gradient Suppression at Inflection Layers: Diagnosing and Mitigating Bottlenecks in Transformer Adaptation

Pre-trained Transformers often exhibit over-confidence in source patterns and difficulty in forming new target-domain patterns during fine-tuning. We formalize the mechanism of output saturation leading to gradient suppression through standard cross-entropy and softmax analysis, showing that gradient suppression at inflection layers confines adaptation to high-level recombination of existing features while preventing low-level reconstruction. We introduce a set of layer-wise diagnostic metrics -- attention entropy (saturation proxy), activation gradient norm, parameter gradient norm, and Delta-CKA under a shared PCA basis -- to identify inflection layers characterized by both low attention entropy and steep gradient decay. Building on these findings, we propose a diagnose-first, inject-light fine-tuning strategy: selectively inserting LoRA adapters at inflection layers to restore suppressed backward signals with minimal parameter overhead. Experiments on BERT-base transfer from SST-2 to Rotten Tomatoes under under-trained and over-trained source regimes reveal that over-trained initialization benefits from inflection-layer LoRA injection, while under-trained initialization suffers performance degradation. When base features are strong, unblocking inflection layers facilitates high-level compositional adaptation; when base features are weak, full-pathway unblocking is required for low-level reconstruction, as supported by joint analysis of layer-wise activation gradients and Delta-CKA dynamics.

  • 1 authors
·
Nov 2, 2025

p-MoD: Building Mixture-of-Depths MLLMs via Progressive Ratio Decay

Despite the remarkable performance of multimodal large language models (MLLMs) across diverse tasks, the substantial training and inference costs impede their advancement. The majority of computation stems from the overwhelming volume of vision tokens processed by the transformer decoder. In this paper, we propose to build efficient MLLMs by leveraging the Mixture-of-Depths (MoD) mechanism, where each transformer decoder layer selects essential vision tokens to process while skipping redundant ones. However, integrating MoD into MLLMs is non-trivial. To address the challenges of training and inference stability as well as limited training data, we adapt the MoD module with two novel designs: tanh-gated weight normalization (TanhNorm) and symmetric token reweighting (STRing). Moreover, we observe that vision tokens exhibit higher redundancy in deeper layer and thus design a progressive ratio decay (PRD) strategy, which gradually reduces the token retention ratio layer by layer, employing a shifted cosine schedule. This crucial design fully unleashes the potential of MoD, significantly boosting the efficiency and performance of our models. To validate the effectiveness of our approach, we conduct extensive experiments with two baseline models across 14 benchmarks. Our model, p-MoD, matches or even surpasses the performance of the baseline models, with only 55.6% TFLOPs and 53.8% KV cache storage during inference, and 77.7% GPU hours during training.

  • 6 authors
·
Dec 5, 2024 2

PRISM: Demystifying Retention and Interaction in Mid-Training

We present PRISM, a comprehensive empirical study of mid-training design choices for large language models. Through controlled experiments across seven base models spanning four families (Granite, LLaMA, Mistral, Nemotron-H), two architecture types (dense Transformer and attention-Mamba hybrid), and scales from 3B to 24B parameters, we show that mid-training on approximately 27B high-quality tokens yields consistent gains of +15 to +40 points on math, +5 to +12 points on code, and +6 to +13 points on science benchmarks while preserving general performance. The full PRISM to RL pipeline improves macro-average across six reasoning benchmarks from under 12 to 29-42 (a 3-4x improvement), whereas RL applied directly to most of the base models remains substantially less effective, with AIME scores near zero. Data composition matters most at mid-training, not RL: including science data during mid-training unlocks +17 to +28 point GPQA-Diamond gains during RL, while changing the RL mix produces less than 2 point differences. Mechanistically, mid-training densely restructures over 90% of model weights, while RL makes sparse, front-loaded refinements to approximately 5% of parameters. Representation analysis (CKA) confirms that RL consistently preserves mid-training's representational geometry (over 0.998 CKA) across architectures. Crucially, RL applies identical weight changes regardless of starting point, yet only succeeds on mid-trained models, consistent with mid-training placing the model in a configuration from which RL can effectively improve performance. Our results demonstrate that retention-aware mid-training is highly effective for reliable reasoning enhancement and provide practical guidance for designing robust mid-training pipelines.

  • 4 authors
·
Mar 17 1

DepthGraft: Structural Regularization through Hierarchical Cross-Layer KV Reconstruction

Scaling depth is a key route to stronger large language models, but Pre-LN architectures often suffer from depth-wise information dilution, limiting the effective use of deep layers. While cross-layer connectivity has proven effective at mitigating this problem, existing designs usually introduce additional computation or memory access. We revisit cross-layer KV sharing as an efficient form of such connectivity. Beyond cache compression, each KV reuse edge creates a direct gradient path from deep layers to source KV projections, turning KV sharing into an implicit structural regularizer for KV representation geometry. We provide a systematic analysis of this mechanism, showing that proper sharing topologies sharpen key retrieval directions while enriching the value content subspace, whereas existing adjacent or global-anchor designs do not fully exploit this effect. Motivated by this, we propose DepthGraft, a hierarchical KV-sharing architecture that reconstructs deep-layer KV from stride-aligned shallow-middle source pairs. DepthGraft distributes non-local gradient flow across source layers, while preserving prefill early completion and reducing KV cache by roughly one third. Experiments on dense and MoE models from 0.5B to 16B parameters show consistent downstream improvements under both GQA and MLA. Notably, on the 16B MoE model, DepthGraft achieves a 7.0% absolute improvement on MMLU-Pro, along with gains of 6.6% on CMMLU and 6.4% on C3. These results validate the potential of DepthGraft as a scalable design for large-scale pretraining. The project page is available at https://github.com/jianke0604/DepthGraft.

Progressive Supernet Training for Efficient Visual Autoregressive Modeling

Visual Auto-Regressive (VAR) models significantly reduce inference steps through the "next-scale" prediction paradigm. However, progressive multi-scale generation incurs substantial memory overhead due to cumulative KV caching, limiting practical deployment. We observe a scale-depth asymmetric dependency in VAR: early scales exhibit extreme sensitivity to network depth, while later scales remain robust to depth reduction. Inspired by this, we propose VARiant: by equidistant sampling, we select multiple subnets ranging from 16 to 2 layers from the original 30-layer VAR-d30 network. Early scales are processed by the full network, while later scales utilize subnet. Subnet and the full network share weights, enabling flexible depth adjustment within a single model. However, weight sharing between subnet and the entire network can lead to optimization conflicts. To address this, we propose a progressive training strategy that breaks through the Pareto frontier of generation quality for both subnets and the full network under fixed-ratio training, achieving joint optimality. Experiments on ImageNet demonstrate that, compared to the pretrained VAR-d30 (FID 1.95), VARiant-d16 and VARiant-d8 achieve nearly equivalent quality (FID 2.05/2.12) while reducing memory consumption by 40-65%. VARiant-d2 achieves 3.5 times speedup and 80% memory reduction at moderate quality cost (FID 2.97). In terms of deployment, VARiant's single-model architecture supports zero-cost runtime depth switching and provides flexible deployment options from high quality to extreme efficiency, catering to diverse application scenarios.

  • 8 authors
·
Nov 20, 2025

CADENCE: Closing the Reasoning Gap via Coverage-Adaptive On-Policy Distillation

On-policy knowledge distillation transfers reasoning from large teachers to compact students, but existing approaches suffer three compounding failure modes: (i) cold-start collapse, where a fresh student assigns near-zero mass to teacher-preferred tokens; (ii) state-agnostic divergence scheduling, where time-only forward/reverse-KL interpolation ignores the student's coverage state; and (iii) binary reward sparsity, where pass/fail signals discard information from partially correct traces. We present CADENCE, a unified framework with a targeted fix for each. Its DRIFT mechanism schedules a per-token convex mixture of forward-KL and reverse-KL surrogate objectives on student-sampled trajectories (per-token surrogates, not sequence-level KL gradient estimators). Six components extend it: (A) COVA, a coverage-adaptive β schedule accelerating the forward-to-reverse transition; (B) FTB, a forking-token boost concentrating gradient at high-entropy positions via a globally-normalized entropy reference; (C) CCD, a dense reward adding numerical-proximity partial credit for incorrect-but-close traces; (D) LAP, brevity-preferential correct-rollout reinforcement; (E) EMR, an entropy-matching calibration regularizer; (F) BSD, a bootstrapped self-distillation phase. On GSM8K and MATH-500 (corrected 512-token protocol, 5 seeds, reported std), CADENCE distills a 0.5B student from a 1.5B teacher to 69.8 pm 0.5% GSM8K pass@1 (from 48.7% pretrained; 63.2% of the teacher gap closed) and to 72.1 pm 0.4% with a 3B teacher (76.2% closed), beating the strongest matched-compute label-using baseline (DRIFT+binary reward) by +4.4 pm 0.7 points. All experiments run on a single Apple Mac Studio (M-series, 64GB unified memory), showing principled distillation reaches strong reasoning quality without datacenter-scale hardware.

  • 2 authors
·
Jul 17 2

Peri-LN: Revisiting Layer Normalization in the Transformer Architecture

Designing Transformer architectures with the optimal layer normalization (LN) strategy that ensures large-scale training stability and expedite convergence has remained elusive, even in this era of large language models (LLMs). To this end, we present a comprehensive analytical foundation for understanding how different LN strategies influence training dynamics in large-scale Transformer training. Until recently, Pre-LN and Post-LN have long dominated standard practices despite their limitations in large-scale training. However, several open-source large-scale models have recently begun silently adopting a third strategy without much explanation. This strategy places layer normalization (LN) peripherally around sublayers, a design we term Peri-LN. While Peri-LN has demonstrated promising empirical performance, its precise mechanisms and benefits remain almost unexplored. Our in-depth analysis shows that Peri-LN strikes an ideal balance in variance growth -- unlike Pre-LN and Post-LN, which are prone to vanishing gradients and ``massive activations.'' To validate our theoretical insight, we conduct large-scale experiments on Transformers up to 3.2B parameters, showing that Peri-LN consistently achieves more balanced variance growth, steadier gradient flow, and convergence stability. Our results suggest that Peri-LN warrants broader consideration for large-scale Transformer architectures, providing renewed insights into the optimal placement and application of LN.

  • 10 authors
·
Feb 4, 2025

Decoding specialised feature neurons in LLMs with the final projection layer

Large Language Models (LLMs) typically have billions of parameters and are thus often difficult to interpret in their operation. Such black-box models can pose a significant risk to safety when trusted to make important decisions. The lack of interpretability of LLMs is more related to their sheer size, rather than the complexity of their individual components. The TARS method for knowledge removal (Davies et al 2024) provides strong evidence for the hypothesis that that linear layer weights which act directly on the residual stream may have high correlation with different concepts encoded in the residual stream. Building upon this, we attempt to decode neuron weights directly into token probabilities through the final projection layer of the model (the LM-head). Firstly, we show that with Llama 3.1 8B we can utilise the LM-head to decode specialised feature neurons that respond strongly to certain concepts, with examples such as "dog" and "California". This is then confirmed by demonstrating that these neurons can be clamped to affect the probability of the concept in the output. This extends to the fine-tuned assistant Llama 3.1 8B instruct model, where we find that over 75% of neurons in the up-projection layers have the same top associated token compared to the pretrained model. Finally, we demonstrate that clamping the "dog" neuron leads the instruct model to always discuss dogs when asked about its favourite animal. Through our method, it is possible to map the entirety of Llama 3.1 8B's up-projection neurons in less than 15 minutes with no parallelization.

  • 1 authors
·
Jan 5, 2025

Tapered Language Models

Modern language models, including transformer, recurrent, and memory-based variants, share a common chassis: a stack of identical layers in which parameters are allocated uniformly across depth. This is a default inherited from the original transformer and largely unchanged since, yet a growing body of evidence suggests that layers contribute non-uniformly to the final output, with later layers refining the residual stream rather than transforming it. We ask whether parameter capacity should reflect this asymmetry. Our controlled experiment shows that, under a fixed budget, allocating more capacity to earlier layers and less to later layers improves perplexity over a uniform-width baseline, while the reverse allocation hurts. Building on this result, we introduce Tapered Language Models (TLMs), an architectural principle in which a parameter-bearing component is monotonically tapered across depth under a fixed total budget. MLPs are the natural site for this instantiation: they dominate parameter count across all modern LM families and expose width as a single, clean axis of variation. Across three model scales and four architectures (Transformer, Gated Attention, Hope-attention, and Titans), tapering MLP width via a smooth cosine schedule consistently improves perplexity and downstream benchmark performance over uniform baselines, at no additional parameter or compute cost. These findings establish depth-aware capacity allocation as a simple, architecture-agnostic axis of language model design, a free lever hidden in plain sight.

  • 3 authors
·
Jun 21

Sparse Growing Transformer: Training-Time Sparse Depth Allocation via Progressive Attention Looping

Existing approaches to increasing the effective depth of Transformers predominantly rely on parameter reuse, extending computation through recursive execution. Under this paradigm, the network structure remains static along the training timeline, and additional computational depth is uniformly assigned to entire blocks at the parameter level. This rigidity across training time and parameter space leads to substantial computational redundancy during training. In contrast, we argue that depth allocation during training should not be a static preset, but rather a progressively growing structural process. Our systematic analysis reveals a deep-to-shallow maturation trajectory across layers, where high-entropy attention heads play a crucial role in semantic integration. Motivated by this observation, we introduce the Sparse Growing Transformer (SGT). SGT is a training-time sparse depth allocation framework that progressively extends recurrence from deeper to shallower layers via targeted attention looping on informative heads. This mechanism induces structural sparsity by selectively increasing depth only for a small subset of parameters as training evolves. Extensive experiments across multiple parameter scales demonstrate that SGT consistently outperforms training-time static block-level looping baselines under comparable settings, while reducing the additional training FLOPs overhead from approximately 16--20% to only 1--3% relative to a standard Transformer backbone.

  • 12 authors
·
Apr 15

Exploring Learngene via Stage-wise Weight Sharing for Initializing Variable-sized Models

In practice, we usually need to build variable-sized models adapting for diverse resource constraints in different application scenarios, where weight initialization is an important step prior to training. The Learngene framework, introduced recently, firstly learns one compact part termed as learngene from a large well-trained model, after which learngene is expanded to initialize variable-sized models. In this paper, we start from analysing the importance of guidance for the expansion of well-trained learngene layers, inspiring the design of a simple but highly effective Learngene approach termed SWS (Stage-wise Weight Sharing), where both learngene layers and their learning process critically contribute to providing knowledge and guidance for initializing models at varying scales. Specifically, to learn learngene layers, we build an auxiliary model comprising multiple stages where the layer weights in each stage are shared, after which we train it through distillation. Subsequently, we expand these learngene layers containing stage information at their corresponding stage to initialize models of variable depths. Extensive experiments on ImageNet-1K demonstrate that SWS achieves consistent better performance compared to many models trained from scratch, while reducing around 6.6x total training costs. In some cases, SWS performs better only after 1 epoch tuning. When initializing variable-sized models adapting for different resource constraints, SWS achieves better results while reducing around 20x parameters stored to initialize these models and around 10x pre-training costs, in contrast to the pre-training and fine-tuning approach.

  • 4 authors
·
Apr 25, 2024

Backpropagation-free Training of Deep Physical Neural Networks

Recent years have witnessed the outstanding success of deep learning in various fields such as vision and natural language processing. This success is largely indebted to the massive size of deep learning models that is expected to increase unceasingly. This growth of the deep learning models is accompanied by issues related to their considerable energy consumption, both during the training and inference phases, as well as their scalability. Although a number of work based on unconventional physical systems have been proposed which addresses the issue of energy efficiency in the inference phase, efficient training of deep learning models has remained unaddressed. So far, training of digital deep learning models mainly relies on backpropagation, which is not suitable for physical implementation as it requires perfect knowledge of the computation performed in the so-called forward pass of the neural network. Here, we tackle this issue by proposing a simple deep neural network architecture augmented by a biologically plausible learning algorithm, referred to as "model-free forward-forward training". The proposed architecture enables training deep physical neural networks consisting of layers of physical nonlinear systems, without requiring detailed knowledge of the nonlinear physical layers' properties. We show that our method outperforms state-of-the-art hardware-aware training methods by improving training speed, decreasing digital computations, and reducing power consumption in physical systems. We demonstrate the adaptability of the proposed method, even in systems exposed to dynamic or unpredictable external perturbations. To showcase the universality of our approach, we train diverse wave-based physical neural networks that vary in the underlying wave phenomenon and the type of non-linearity they use, to perform vowel and image classification tasks experimentally.

  • 5 authors
·
Apr 20, 2023

Layerwise Repacking: Variable-Length Hybrid-Attention Training without an Extra Redistribution Pass

Variable-length training creates conflicting parallelism requirements across the layers of a hybrid-attention model. The longest samples require wide sequence-parallel (SP) groups of 16 or 32 ranks for full attention, whose cost grows quadratically with sequence length. Sparse-attention layers, dominated by near-linear MoE work, can instead balance most evaluated workloads within node-local SP8 groups. Reusing the wide groups for these layers pushes their all-to-all communication across nodes, where the observed effective rate is 7.0x lower. Yet switching to smaller groups changes which ranks own each sample; a separate redistribution at every full-sparse boundary would introduce another data transfer. Layerwise Repacking keeps each SP16/32 parent for full attention and repacks its samples into node-local sparse children at SP{1, 2, 4, 8}, where hidden states persist between full layers. The layout change rides on the two existing full-layer Ulysses sites: at each, one variable-size all-to-all performs both the head exchange and the sample repacking, so no redistribution pass is added. Because the balance the children can reach depends on which samples share a parent, an auxiliary parent solver rebalances parent membership before the children are formed. On all 22 steps with SP16/32 parents among the first 200 training steps of a 1F3S hybrid-attention model (one full-attention layer per three sparse-attention layers), repacking alone reduces the mean end-to-end time by 5.95% and raises model FLOPs utilization (MFU) by 3.75 percentage points over the baseline with repacking disabled; with the improved solver, end-to-end time falls by 7.61% and MFU rises by 4.83 percentage points.

  • 6 authors
·
Oct 25

NOBLE: Accelerating Transformers with Nonlinear Low-Rank Branches

We introduce NOBLE (Nonlinear lOw-rank Branch for Linear Enhancement), an architectural augmentation that adds nonlinear low-rank branches to transformer linear layers. Unlike LoRA and other parameter-efficient fine-tuning (PEFT) methods, NOBLE is designed for pretraining from scratch. The branch is a permanent part of the architecture as opposed to an adapter for finetuning on top of frozen weights. The branch computes σ(xWdown)Wup where σ is a learnable nonlinearity. We evaluate several activation functions and find that CosNet, a two-layer cosine nonlinearity with learnable frequency and phase with a linear projection in between them in the bottleneck space, performs best. NOBLE achieves substantial improvements with minimal overhead: up to 1.47x step speedup to reach baseline eval loss (up to 32% fewer training steps), with as low as 4% additional parameters and 7% step time overhead, resulting in up to 1.22x net wallclock speedup. Experiments on LLMs (250M and 1.5B parameters), BERT, VQGAN, and ViT consistently show improved training efficiency. We identify one caveat: Mixup/CutMix augmentation interferes with NOBLE's benefits in Imagenet classification along with other stochastic augmentations, but when disabled, ViT also improves. This discrepancy is possibly explained by regularization techniques that encourage smoother fits to the target function while NOBLE may specialize more in sharper aspects of the target function.

  • 1 authors
·
Mar 6