new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 18

COMET: Contrastive Motion-Enhanced Temporal Reasoning for Video Multimodal Large Language Models

Video multimodal large language models have advanced significantly, yet fine-grained motion-temporal understanding remains fragile. The core bottleneck is not only sparse frame sampling, but also the lack of a complete temporal modeling pipeline for explicitly representing frame-to-frame change, enabling appearance-motion interaction, and optimizing temporal direction sensitivity. We propose COMET, a temporally grounded framework that systematically strengthens video MLLMs through explicit temporal representation, appearance-motion fusion, and direction-aware optimization. Architecturally, COMET introduces a temporal motion branch built on Taylor frame differences and injects its motion evidence into the appearance stream via temporal attention bias-enhanced cross-attention. For optimization, COMET combines temporal prior distillation with a forward-reverse TC-GRPO stage that turns temporal order into a direct learning signal and strengthens the model's use of directional motion patterns encoded by the temporal motion branch. The method achieves consistent overall improvements with a pronounced motion-temporal bias: on Qwen3-VL-8B, action-centric tasks (STAR, SSv2) improve by 4.9% on average, temporal reasoning tasks (NExT-QA, CLEVRER, LLaVA-178K) by 2.1% over BL-GRPO, while static perception tasks (PerceptionTest) remain on par. The same gain pattern also transfers to InternVL2.5-8B, indicating that COMET generalizes across model families.

  • 11 authors
·
Aug 20

Combo: Co-speech holistic 3D human motion generation and efficient customizable adaptation in harmony

In this paper, we propose a novel framework, Combo, for harmonious co-speech holistic 3D human motion generation and efficient customizable adaption. In particular, we identify that one fundamental challenge as the multiple-input-multiple-output (MIMO) nature of the generative model of interest. More concretely, on the input end, the model typically consumes both speech signals and character guidance (e.g., identity and emotion), which not only poses challenge on learning capacity but also hinders further adaptation to varying guidance; on the output end, holistic human motions mainly consist of facial expressions and body movements, which are inherently correlated but non-trivial to coordinate in current data-driven generation process. In response to the above challenge, we propose tailored designs to both ends. For the former, we propose to pre-train on data regarding a fixed identity with neutral emotion, and defer the incorporation of customizable conditions (identity and emotion) to fine-tuning stage, which is boosted by our novel X-Adapter for parameter-efficient fine-tuning. For the latter, we propose a simple yet effective transformer design, DU-Trans, which first divides into two branches to learn individual features of face expression and body movements, and then unites those to learn a joint bi-directional distribution and directly predicts combined coefficients. Evaluated on BEAT2 and SHOW datasets, Combo is highly effective in generating high-quality motions but also efficient in transferring identity and emotion. Project website: https://xc-csc101.github.io/combo/{Combo}.

  • 8 authors
·
Aug 18, 2024

Generative Cinematographer: Composing Camera and Object Motion in 3D

Current controllable video generation systems often rely on 2D motion trajectories or sparse drag signals for object motion. These controls are ambiguous because the same 2D trajectory can correspond to different 3D motions, especially when the camera and objects move simultaneously. We present Generative Cinematographer (GenCine), a system that lifts a single image into an editable 3D scene scaffold where artists jointly author camera and foreground motion. Artists specify a camera path and move selected foreground regions using local 3D motion handles. Several handles can move different parts of a subject independently, providing a piecewise-rigid approximation to non-rigid motion without a physics simulator or category-specific prior. To communicate these controls to a pretrained video model, we project them into guidance maps. These maps record where the controlled regions appear in each frame, assign each handle a fixed color across frames and encode the current 3D positions of its controlled points in the same world coordinate system as the background. This lets us describe object motion relative to the scene even as the camera moves. For training, we recover controls from the motion observed in real videos and use ground-truth geometry and trajectories from synthetic videos. We train a lightweight guidance branch and LoRA adapters on a pretrained Wan model to follow these controls. Our experiments show consistent camera-relative motion, improved geometric consistency under viewpoint changes, and strong controllability across diverse real-world scenes.

  • 7 authors
·
Sep 30

DiffCVE: Diffusion-based Compressed Video Enhancement

Perceptual quality enhancement of severely compressed videos remains challenging due to complex artifact patterns and substantial information loss. Recent diffusion models have demonstrated strong generative capability for visual restoration, but directly applying them to compressed video often ignores compression degradation characteristics and may introduce structure-inconsistent hallucinations. To address this issue, this paper presents a diffusion-based compressed video enhancement method, named DiffCVE. Coding Prior-enhanced Dual Conditioning (CPDC) branches are designed to jointly model compressed video and coding prior conditions, where coding priors including residuals and motion vectors provide complementary structural and motion guidance during the diffusion denoising process. To make the diffusion process aware of compression severity, a Compression Degradation Semantic Prompting (CDSP) mechanism is introduced to leverage QP-conditioned textual prompts together with LoRA fine-tuning. In addition, a Coding Prior-guided Weighted Fusion (CPWF) module is incorporated into the VAE decoder to fuse VAE encoder and coding prior encoder features with QP-predicted weights. Extensive experiments demonstrate the effectiveness of the proposed method in improving perceptual quality, especially under severe compression settings. The project page with enhanced video demonstrations is available at https://wqmaker.github.io/projects/DiffCVE/.

  • 4 authors
·
Jul 7

DreamWAM: Beyond RGB Future Prediction for World Action Models

World Action Models (WAMs) learn action-relevant representations by predicting how the observed world will evolve. Most existing WAMs define this future in RGB space, where task-relevant state transitions are entangled with nuisance variations in texture, illumination, background, and viewpoint. We argue that WAMs should explicitly predict action-relevant future state rather than relying on RGB prediction alone. We introduce DreamWAM, which reformulates future prediction as structured world modeling beyond RGB, representing future states through complementary views of appearance, motion, geometry, and semantics. During training, DreamWAM combines joint latent denoising of RGB and motion with lightweight gated residual branches for geometry and semantics. Shared attention between VideoDiT and ActionDiT allows the action branch to learn from these future-state predictions, while all beyond-RGB supervision branches are disabled at inference and deployment remains RGB-only. Across both no-rollout and joint video-action inference, DreamWAM consistently improves the matched RGB-only baselines on LIBERO, from 97.30\% to 98.40\% and from 98.00\% to 98.90\%, respectively. The gains become larger under unseen LIBERO-Plus perturbations, from 51.36\% to 63.44\% and from 69.16\% to 75.47\%. The same robustness extends to real-world manipulation, where DreamWAM attains an average success rate of 74.4\% across unseen changes in lighting, background, and object layout, compared with 55.6\% for Fast-WAM-Joint. These results show that robust world-action learning depends not only on predicting the future, but on representing it in a form that matters for action. The code and models are publicly released at https://github.com/hustvl/DreamWAM.

  • 9 authors
·
Aug 4

TalkingGaussian: Structure-Persistent 3D Talking Head Synthesis via Gaussian Splatting

Radiance fields have demonstrated impressive performance in synthesizing lifelike 3D talking heads. However, due to the difficulty in fitting steep appearance changes, the prevailing paradigm that presents facial motions by directly modifying point appearance may lead to distortions in dynamic regions. To tackle this challenge, we introduce TalkingGaussian, a deformation-based radiance fields framework for high-fidelity talking head synthesis. Leveraging the point-based Gaussian Splatting, facial motions can be represented in our method by applying smooth and continuous deformations to persistent Gaussian primitives, without requiring to learn the difficult appearance change like previous methods. Due to this simplification, precise facial motions can be synthesized while keeping a highly intact facial feature. Under such a deformation paradigm, we further identify a face-mouth motion inconsistency that would affect the learning of detailed speaking motions. To address this conflict, we decompose the model into two branches separately for the face and inside mouth areas, therefore simplifying the learning tasks to help reconstruct more accurate motion and structure of the mouth region. Extensive experiments demonstrate that our method renders high-quality lip-synchronized talking head videos, with better facial fidelity and higher efficiency compared with previous methods.

  • 7 authors
·
Apr 23, 2024

MultiCOIN: Multi-Modal COntrollable Video INbetweening

Video inbetweening creates smooth and natural transitions between two image frames, making it an indispensable tool for video editing and long-form video synthesis. Existing works in this domain are unable to generate large, complex, or intricate motions. In particular, they cannot accommodate the versatility of user intents and generally lack fine control over the details of intermediate frames, leading to misalignment with the creative mind. To fill these gaps, we introduce MultiCOIN, a video inbetweening framework that allows multi-modal controls, including depth transition and layering, motion trajectories, text prompts, and target regions for movement localization, while achieving a balance between flexibility, ease of use, and precision for fine-grained video interpolation. To achieve this, we adopt the Diffusion Transformer (DiT) architecture as our video generative model, due to its proven capability to generate high-quality long videos. To ensure compatibility between DiT and our multi-modal controls, we map all motion controls into a common sparse and user-friendly point-based representation as the video/noise input. Further, to respect the variety of controls which operate at varying levels of granularity and influence, we separate content controls and motion controls into two branches to encode the required features before guiding the denoising process, resulting in two generators, one for motion and the other for content. Finally, we propose a stage-wise training strategy to ensure that our model learns the multi-modal controls smoothly. Extensive qualitative and quantitative experiments demonstrate that multi-modal controls enable a more dynamic, customizable, and contextually accurate visual narrative.

  • 7 authors
·
Oct 9, 2025 2

Joints, Camera, Action! Co-Generating 3D Motion and Video for Arbitrary Rigs

Video generation models can now depict remarkably realistic motion. Yet it is unclear how to use this motion beyond pixels: to animate a specific 3D asset and replay the animation in its 3D scene. For instance, a video model can show a monkey jumping over a crossbar, but it cannot return that jump as replayable 3D motion placed in the 3D scene. Here we present a model that directly co-generates the video and 3D motion for any supplied rig, along with a camera that registers this motion to the scene. Prior video-motion models either handle only human skeletons, often adding billions of parameters, or triangulate 3D motion from generated 2D pose maps. We instead keep 3D motion in a separate model that supports arbitrary skeletons, and connect it to a pretrained video model through a small set of cross-attention layers. This separation lets the motion model first learn how skeletons move from motion-only data, which is easier to obtain and augment than paired video. Additionally, our model learns to locate each joint in the video frames, which lets us recover the camera and place the 3D motion in the scene. To train across many skeletons, we use a generative video editor to place animated 3D assets in scenes suited to their actions, curating the edits so their known motion remains valid. Together with human and robot video, this yields nearly 200K training pairs. Our evaluations demonstrate that our model animates diverse rigs from text more faithfully than video-first pipelines, and its motion responds to the surrounding scene. It also turns video into rig motion, rig motion into video, and enables keyframe-based control of the 3D motion. Videos and additional results are available on our project page: https://research.nvidia.com/labs/par/projects/jca/.

nvidia NVIDIA
·
Oct 19 2

Sketch2Motion: Text-driven 2D Sketch to 3D Animation via Diffusion-guided Skeleton Optimization

Animation of 2D hand-drawn sketches provides an effective medium for visual communication. However, these sketches pose challenges, particularly in handling occlusions and accurately mapping motion. While 3D animation naturally addresses these challenges, estimating 3D motion remains a very complex task. Recent approaches to converting 2D sketches to 3D animations have mainly focused on specific types of motion, such as bipedal movements and facial expressions. We propose Sketch2Motion, a diffusion-guided framework for skeleton-based motion synthesis that combines classical character animation pipelines with deep generative priors. Our method represents motion using skeletal transformations, which are propagated to mesh deformations via linear blend skinning. To guide the resulting animation toward realistic and semantically meaningful motion, we integrate a text-to-video diffusion model via motion-aware score-distillation sampling (MoSDS), enabling optimization without paired motion data. Additionally, we apply physics-inspired smoothness, topological, and contact constraints to stabilize optimization and preserve motion plausibility. Further, we integrate a spring-mass simulator to introduce secondary motion effects. The proposed framework is generalized, fully differentiable, modular, and compatible with biped, quadruped, and non-living articulated characters. Experiments demonstrate that our approach produces temporally coherent, text-aligned animations that outperform baseline motion transfer methods that lack generative priors or explicit physical constraints. We will make our code and dataset publicly available.

  • 2 authors
·
May 26

MotionGPT3: Human Motion as a Second Modality

Though recent advances in multimodal models have demonstrated strong capabilities and opportunities in unified understanding and generation, the development of unified motion-language models remains underexplored. To enable such models with high-fidelity human motion, two core challenges must be addressed. The first is the reconstruction gap between the continuous motion modality and discrete representation in an autoregressive manner, and the second is the degradation of language intelligence during unified training. Inspired by the mixture of experts, we propose MotionGPT3, a bimodal motion-language model that treats human motion as a second modality, decoupling motion modeling via separate model parameters and enabling both effective cross-modal interaction and efficient multimodal scaling training. To preserve language intelligence, the text branch retains the original structure and parameters of the pretrained language model, while a new motion branch is integrated via a shared attention mechanism, enabling bidirectional information flow between two modalities. We first employ a motion Variational Autoencoder (VAE) to encode raw human motion into latent representations. Based on this continuous latent space, the motion branch predicts motion latents directly from intermediate hidden states using a diffusion head, bypassing discrete tokenization. Extensive experiments show that our approach achieves competitive performance on both motion understanding and generation tasks while preserving strong language capabilities, establishing a unified bimodal motion diffusion framework within an autoregressive manner.

  • 8 authors
·
Jun 30, 2025

FlexiAct: Towards Flexible Action Control in Heterogeneous Scenarios

Action customization involves generating videos where the subject performs actions dictated by input control signals. Current methods use pose-guided or global motion customization but are limited by strict constraints on spatial structure, such as layout, skeleton, and viewpoint consistency, reducing adaptability across diverse subjects and scenarios. To overcome these limitations, we propose FlexiAct, which transfers actions from a reference video to an arbitrary target image. Unlike existing methods, FlexiAct allows for variations in layout, viewpoint, and skeletal structure between the subject of the reference video and the target image, while maintaining identity consistency. Achieving this requires precise action control, spatial structure adaptation, and consistency preservation. To this end, we introduce RefAdapter, a lightweight image-conditioned adapter that excels in spatial adaptation and consistency preservation, surpassing existing methods in balancing appearance consistency and structural flexibility. Additionally, based on our observations, the denoising process exhibits varying levels of attention to motion (low frequency) and appearance details (high frequency) at different timesteps. So we propose FAE (Frequency-aware Action Extraction), which, unlike existing methods that rely on separate spatial-temporal architectures, directly achieves action extraction during the denoising process. Experiments demonstrate that our method effectively transfers actions to subjects with diverse layouts, skeletons, and viewpoints. We release our code and model weights to support further research at https://shiyi-zh0408.github.io/projectpages/FlexiAct/

  • 5 authors
·
May 6, 2025 1

SINC: Spatial Composition of 3D Human Motions for Simultaneous Action Generation

Our goal is to synthesize 3D human motions given textual inputs describing simultaneous actions, for example 'waving hand' while 'walking' at the same time. We refer to generating such simultaneous movements as performing 'spatial compositions'. In contrast to temporal compositions that seek to transition from one action to another, spatial compositing requires understanding which body parts are involved in which action, to be able to move them simultaneously. Motivated by the observation that the correspondence between actions and body parts is encoded in powerful language models, we extract this knowledge by prompting GPT-3 with text such as "what are the body parts involved in the action <action name>?", while also providing the parts list and few-shot examples. Given this action-part mapping, we combine body parts from two motions together and establish the first automated method to spatially compose two actions. However, training data with compositional actions is always limited by the combinatorics. Hence, we further create synthetic data with this approach, and use it to train a new state-of-the-art text-to-motion generation model, called SINC ("SImultaneous actioN Compositions for 3D human motions"). In our experiments, that training with such GPT-guided synthetic data improves spatial composition generation over baselines. Our code is publicly available at https://sinc.is.tue.mpg.de/.

  • 4 authors
·
Apr 20, 2023

TopX: Text-to-Motion for Unseen Skeletons from the Skeleton File Alone

Text-to-motion models generate for the skeletons they were trained on, while a new character arrives as a skeleton file and nothing else. We study text-to-motion for skeletons that no training clip has used, with no clips of the character, no template, no retargeting and no fine-tuning. We present TopX, a 73M-parameter flow-matching transformer that generates joint rotations and a root trajectory for any kinematic tree from its tree, rest pose and joint names. Motion is normalised by the rest pose and the size of the skeleton, and the rest pose enters as a world-frame descriptor that does not depend on how the rig's author oriented each joint, with rest conventions randomised in training. Attention is factorised over the joints and the frames of a motion and carries a spatial--temporal encoding designed for skeleton graphs of any topology: queries and keys are rotated across joints by a heat-kernel coordinate of the skeleton graph, which is defined for every tree and does not change with the order of its joints or the eigenbasis of its Laplacian, and across frames by a rotary encoding of frame order. To measure what this buys, we build SkelShift: four motion corpora under one codec, 143,334 captioned clips on skeletons of 4 to 142 joints, from which 4,232 clips on 2,043 skeletons are held out by clip, rig, tree class or species and organised along topology, joint count, body plan, species and rig source, and scored by motion quality: Fréchet distances on public kinetic features and on kinematic descriptors, foot skating and ground contact. Against UniMate trained on the same clips, on test rigs without a training clip, TopX lowers the descriptor FID from 5.73 to 4.58 when UniMate's guidance is tuned for the kinetic FID, and the kinetic FID from 1.48 to 0.55 when it is tuned for the descriptor FID, also on motions no training skeleton performs; fewer of its frames sink below the ground.

  • 6 authors
·
Oct 24

PSUMNet: Unified Modality Part Streams are All You Need for Efficient Pose-based Action Recognition

Pose-based action recognition is predominantly tackled by approaches which treat the input skeleton in a monolithic fashion, i.e. joints in the pose tree are processed as a whole. However, such approaches ignore the fact that action categories are often characterized by localized action dynamics involving only small subsets of part joint groups involving hands (e.g. `Thumbs up') or legs (e.g. `Kicking'). Although part-grouping based approaches exist, each part group is not considered within the global pose frame, causing such methods to fall short. Further, conventional approaches employ independent modality streams (e.g. joint, bone, joint velocity, bone velocity) and train their network multiple times on these streams, which massively increases the number of training parameters. To address these issues, we introduce PSUMNet, a novel approach for scalable and efficient pose-based action recognition. At the representation level, we propose a global frame based part stream approach as opposed to conventional modality based streams. Within each part stream, the associated data from multiple modalities is unified and consumed by the processing pipeline. Experimentally, PSUMNet achieves state of the art performance on the widely used NTURGB+D 60/120 dataset and dense joint skeleton dataset NTU 60-X/120-X. PSUMNet is highly efficient and outperforms competing methods which use 100%-400% more parameters. PSUMNet also generalizes to the SHREC hand gesture dataset with competitive performance. Overall, PSUMNet's scalability, performance and efficiency makes it an attractive choice for action recognition and for deployment on compute-restricted embedded and edge devices. Code and pretrained models can be accessed at https://github.com/skelemoa/psumnet

  • 2 authors
·
Aug 11, 2022

MotionLab: Unified Human Motion Generation and Editing via the Motion-Condition-Motion Paradigm

Human motion generation and editing are key components of computer graphics and vision. However, current approaches in this field tend to offer isolated solutions tailored to specific tasks, which can be inefficient and impractical for real-world applications. While some efforts have aimed to unify motion-related tasks, these methods simply use different modalities as conditions to guide motion generation. Consequently, they lack editing capabilities, fine-grained control, and fail to facilitate knowledge sharing across tasks. To address these limitations and provide a versatile, unified framework capable of handling both human motion generation and editing, we introduce a novel paradigm: Motion-Condition-Motion, which enables the unified formulation of diverse tasks with three concepts: source motion, condition, and target motion. Based on this paradigm, we propose a unified framework, MotionLab, which incorporates rectified flows to learn the mapping from source motion to target motion, guided by the specified conditions. In MotionLab, we introduce the 1) MotionFlow Transformer to enhance conditional generation and editing without task-specific modules; 2) Aligned Rotational Position Encoding} to guarantee the time synchronization between source motion and target motion; 3) Task Specified Instruction Modulation; and 4) Motion Curriculum Learning for effective multi-task learning and knowledge sharing across tasks. Notably, our MotionLab demonstrates promising generalization capabilities and inference efficiency across multiple benchmarks for human motion. Our code and additional video results are available at: https://diouo.github.io/motionlab.github.io/.

  • 4 authors
·
Feb 4, 2025 3

MotionCtrl: A Unified and Flexible Motion Controller for Video Generation

Motions in a video primarily consist of camera motion, induced by camera movement, and object motion, resulting from object movement. Accurate control of both camera and object motion is essential for video generation. However, existing works either mainly focus on one type of motion or do not clearly distinguish between the two, limiting their control capabilities and diversity. Therefore, this paper presents MotionCtrl, a unified and flexible motion controller for video generation designed to effectively and independently control camera and object motion. The architecture and training strategy of MotionCtrl are carefully devised, taking into account the inherent properties of camera motion, object motion, and imperfect training data. Compared to previous methods, MotionCtrl offers three main advantages: 1) It effectively and independently controls camera motion and object motion, enabling more fine-grained motion control and facilitating flexible and diverse combinations of both types of motion. 2) Its motion conditions are determined by camera poses and trajectories, which are appearance-free and minimally impact the appearance or shape of objects in generated videos. 3) It is a relatively generalizable model that can adapt to a wide array of camera poses and trajectories once trained. Extensive qualitative and quantitative experiments have been conducted to demonstrate the superiority of MotionCtrl over existing methods.

  • 7 authors
·
Dec 6, 2023 2

Motion Mamba: Efficient and Long Sequence Motion Generation with Hierarchical and Bidirectional Selective SSM

Human motion generation stands as a significant pursuit in generative computer vision, while achieving long-sequence and efficient motion generation remains challenging. Recent advancements in state space models (SSMs), notably Mamba, have showcased considerable promise in long sequence modeling with an efficient hardware-aware design, which appears to be a promising direction to build motion generation model upon it. Nevertheless, adapting SSMs to motion generation faces hurdles since the lack of a specialized design architecture to model motion sequence. To address these challenges, we propose Motion Mamba, a simple and efficient approach that presents the pioneering motion generation model utilized SSMs. Specifically, we design a Hierarchical Temporal Mamba (HTM) block to process temporal data by ensemble varying numbers of isolated SSM modules across a symmetric U-Net architecture aimed at preserving motion consistency between frames. We also design a Bidirectional Spatial Mamba (BSM) block to bidirectionally process latent poses, to enhance accurate motion generation within a temporal frame. Our proposed method achieves up to 50% FID improvement and up to 4 times faster on the HumanML3D and KIT-ML datasets compared to the previous best diffusion-based method, which demonstrates strong capabilities of high-quality long sequence motion modeling and real-time human motion generation. See project website https://steve-zeyu-zhang.github.io/MotionMamba/

  • 6 authors
·
Mar 12, 2024 4

LaDy: Lagrangian-Dynamic Informed Network for Skeleton-based Action Segmentation via Spatial-Temporal Modulation

Skeleton-based Temporal Action Segmentation (STAS) aims to densely parse untrimmed skeletal sequences into frame-level action categories. However, existing methods, while proficient at capturing spatio-temporal kinematics, neglect the underlying physical dynamics that govern human motion. This oversight limits inter-class discriminability between actions with similar kinematics but distinct dynamic intents, and hinders precise boundary localization where dynamic force profiles shift. To address these, we propose the Lagrangian-Dynamic Informed Network (LaDy), a framework integrating principles of Lagrangian dynamics into the segmentation process. Specifically, LaDy first computes generalized coordinates from joint positions and then estimates Lagrangian terms under physical constraints to explicitly synthesize the generalized forces. To further ensure physical coherence, our Energy Consistency Loss enforces the work-energy theorem, aligning kinetic energy change with the work done by the net force. The learned dynamics then drive a Spatio-Temporal Modulation module: Spatially, generalized forces are fused with spatial representations to provide more discriminative semantics. Temporally, salient dynamic signals are constructed for temporal gating, thereby significantly enhancing boundary awareness. Experiments on challenging datasets show that LaDy achieves state-of-the-art performance, validating the integration of physical dynamics for action segmentation. Code is available at https://github.com/HaoyuJi/LaDy.

  • 8 authors
·
Mar 24

UMO: Unified In-Context Learning Unlocks Motion Foundation Model Priors

Large-scale foundation models (LFMs) have recently made impressive progress in text-to-motion generation by learning strong generative priors from massive 3D human motion datasets and paired text descriptions. However, how to effectively and efficiently leverage such single-purpose motion LFMs, i.e., text-to-motion synthesis, in more diverse cross-modal and in-context motion generation downstream tasks remains largely unclear. Prior work typically adapts pretrained generative priors to individual downstream tasks in a task-specific manner. In contrast, our goal is to unlock such priors to support a broad spectrum of downstream motion generation tasks within a single unified framework. To bridge this gap, we present UMO, a simple yet general unified formulation that casts diverse downstream tasks into compositions of atomic per-frame operations, enabling in-context adaptation to unlock the generative priors of pretrained DiT-based motion LFMs. Specifically, UMO introduces three learnable frame-level meta-operation embeddings to specify per-frame intent and employs lightweight temporal fusion to inject in-context cues into the pretrained backbone, with negligible runtime overhead compared to the base model. With this design, UMO finetunes the pretrained model, originally limited to text-to-motion generation, to support diverse previously unsupported tasks, including temporal inpainting, text-guided motion editing, text-serialized geometric constraints, and multi-identity reaction generation. Experiments demonstrate that UMO consistently outperforms task-specific and training-free baselines across a wide range of benchmarks, despite using a single unified model. Code and model will be publicly available. Project Page: https://oliver-cong02.github.io/UMO.github.io/

  • 12 authors
·
Mar 16

ForwardDLO: Model-Based Bimanual Shape Matching of Unconstrained Deformable Linear Objects

Ropes, cables, and other deformable linear objects appear in tasks from untangling to cable routing and suturing, yet controlling their shape remains a challenge in robot manipulation. We study model-based shape control in a general setting: the object lies unfixated on a support surface and two arms may grasp and move it anywhere along its length. Because each arm chooses a grasp point, direction, and magnitude, the joint action space is combinatorially large, and the dynamics model's per-prediction cost bounds how much of it a planner can search. We present ForwardDLO, a recurrent latent dynamics model for this unfixated bimanual setting that predicts per-segment displacements grounded in the observed rope state at every step. Our model reaches accuracy comparable to more expensive baselines while containing no explicit segment-to-segment operations, which makes batched evaluation of candidate actions cheap. On open-loop prediction of real rope motion it reaches the lowest error of the learned models we evaluate, 13% below the strongest baseline. Within a fixed time budget it scores 8 to 22 times more candidate actions than models of comparable accuracy while matching them in real-world shape matching; and on a simulated routing task at a 30Hz control rate, this throughput converts into 98% task success versus at most 30% for the baselines at their own budgets. We release the model, code, and a dataset of 2.42 million simulated and 14,107 real rope transitions at https://anonymous.4open.science/r/ForwardDLO/

  • 6 authors
·
Sep 16

MotionBank: A Large-scale Video Motion Benchmark with Disentangled Rule-based Annotations

In this paper, we tackle the problem of how to build and benchmark a large motion model (LMM). The ultimate goal of LMM is to serve as a foundation model for versatile motion-related tasks, e.g., human motion generation, with interpretability and generalizability. Though advanced, recent LMM-related works are still limited by small-scale motion data and costly text descriptions. Besides, previous motion benchmarks primarily focus on pure body movements, neglecting the ubiquitous motions in context, i.e., humans interacting with humans, objects, and scenes. To address these limitations, we consolidate large-scale video action datasets as knowledge banks to build MotionBank, which comprises 13 video action datasets, 1.24M motion sequences, and 132.9M frames of natural and diverse human motions. Different from laboratory-captured motions, in-the-wild human-centric videos contain abundant motions in context. To facilitate better motion text alignment, we also meticulously devise a motion caption generation algorithm to automatically produce rule-based, unbiased, and disentangled text descriptions via the kinematic characteristics for each motion. Extensive experiments show that our MotionBank is beneficial for general motion-related tasks of human motion generation, motion in-context generation, and motion understanding. Video motions together with the rule-based text annotations could serve as an efficient alternative for larger LMMs. Our dataset, codes, and benchmark will be publicly available at https://github.com/liangxuy/MotionBank.

  • 9 authors
·
Oct 17, 2024

Controllable Exaggeration for Generative Motion Models via Training-Time Adaptation and Inference-Time Guidance

Recent motion generative models have demonstrated strong capabilities in synthesizing physically plausible character motion, but often overlook established animation principles used by professional animators to ground and design their animation work. Understanding and incorporating these principles into motion generative pipelines is essential for producing motions that serve not only physically grounded applications but also the needs of the character animation community. This enables the creation of characters that not only move in physically plausible ways but also feel alive, expressive, and engaging. To close this gap, we focus on the Exaggeration principle of animation and investigate how it can be incorporated into modern motion generative pipelines to produce more expressive character motions. To this end, we introduce a framework that operates at two stages of existing motion generative pipelines. The first stage introduces exaggeration during training, where we perform supervised fine-tuning of pre-trained text-to-motion models on our curated exaggeration dataset. The second stage operates at inference time, where we: (i) introduce a mathematical formulation of exaggeration based on dynamic movement primitives (DMPs); and (ii) leverage this formulation as an exaggeration guidance signal to guide existing diffusion and flow-matching text-to-motion generation models toward exaggerated motion without additional training. Through qualitative and quantitative evaluations against three strong motion generation models, we show that our methods generate more exaggerated and expressive motions while preserving neutral reference motion intent and physical plausibility.

Motion-o: Trajectory-Grounded Video Reasoning

Recent research has made substantial progress on video reasoning, with many models leveraging spatio-temporal evidence chains to strengthen their inference capabilities. At the same time, a growing set of datasets and benchmarks now provides structured annotations designed to support and evaluate such reasoning. However, little attention has been paid to reasoning about how objects move between observations: no prior work has articulated the motion patterns by connecting successive observations, leaving trajectory understanding implicit and difficult to verify. We formalize this missing capability as Spatial-Temporal-Trajectory (STT) reasoning and introduce Motion-o, a motion-centric video understanding extension to visual language models that makes trajectories explicit and verifiable. To enable motion reasoning, we also introduce a trajectory-grounding dataset artifact that expands sparse keyframe supervision via augmentation to yield denser bounding box tracks and a stronger trajectory-level training signal. Finally, we introduce Motion Chain of Thought (MCoT), a structured reasoning pathway that makes object trajectories through discrete <motion/> tag summarizing per-object direction, speed, and scale (of velocity) change to explicitly connect grounded observations into trajectories. To train Motion-o, we design a reward function that compels the model to reason directly over visual evidence, all while requiring no architectural modifications. Empirical results demonstrate that Motion-o improves spatial-temporal grounding and trajectory prediction while remaining fully compatible with existing frameworks, establishing motion reasoning as a critical extension for evidence-based video understanding. Code is available at https://github.com/ostadabbas/Motion-o.

In-2-4D: Inbetweening from Two Single-View Images to 4D Generation

We propose a new problem, In-2-4D, for generative 4D (i.e., 3D + motion) inbetweening from a minimalistic input setting: two single-view images capturing an object in two distinct motion states. Given two images representing the start and end states of an object in motion, our goal is to generate and reconstruct the motion in 4D. We utilize a video interpolation model to predict the motion, but large frame-to-frame motions can lead to ambiguous interpretations. To overcome this, we employ a hierarchical approach to identify keyframes that are visually close to the input states and show significant motion, then generate smooth fragments between them. For each fragment, we construct the 3D representation of the keyframe using Gaussian Splatting. The temporal frames within the fragment guide the motion, enabling their transformation into dynamic Gaussians through a deformation field. To improve temporal consistency and refine 3D motion, we expand the self-attention of multi-view diffusion across timesteps and apply rigid transformation regularization. Finally, we merge the independently generated 3D motion segments by interpolating boundary deformation fields and optimizing them to align with the guiding video, ensuring smooth and flicker-free transitions. Through extensive qualitative and quantitiave experiments as well as a user study, we show the effectiveness of our method and its components. The project page is available at https://in-2-4d.github.io/

  • 4 authors
·
Apr 11, 2025 2

C-Drag: Chain-of-Thought Driven Motion Controller for Video Generation

Trajectory-based motion control has emerged as an intuitive and efficient approach for controllable video generation. However, the existing trajectory-based approaches are usually limited to only generating the motion trajectory of the controlled object and ignoring the dynamic interactions between the controlled object and its surroundings. To address this limitation, we propose a Chain-of-Thought-based motion controller for controllable video generation, named C-Drag. Instead of directly generating the motion of some objects, our C-Drag first performs object perception and then reasons the dynamic interactions between different objects according to the given motion control of the objects. Specifically, our method includes an object perception module and a Chain-of-Thought-based motion reasoning module. The object perception module employs visual language models to capture the position and category information of various objects within the image. The Chain-of-Thought-based motion reasoning module takes this information as input and conducts a stage-wise reasoning process to generate motion trajectories for each of the affected objects, which are subsequently fed to the diffusion model for video synthesis. Furthermore, we introduce a new video object interaction (VOI) dataset to evaluate the generation quality of motion controlled video generation methods. Our VOI dataset contains three typical types of interactions and provides the motion trajectories of objects that can be used for accurate performance evaluation. Experimental results show that C-Drag achieves promising performance across multiple metrics, excelling in object motion control. Our benchmark, codes, and models will be available at https://github.com/WesLee88524/C-Drag-Official-Repo.

  • 7 authors
·
Feb 27, 2025

Skeletons in Flow: Graph Structured Flow Matching for Human Motion Prediction

Human motion prediction requires diverse future trajectories that remain consistent with observed motion and the articulated physical structure of the body. Skeletal constraints restrict individual poses, while coordinated motion depends on spatial interactions (between connected joints) and temporal interactions (between time instants). To facilitate human motion prediction in light of these constraints and interactions, we introduce Graph Structured Flow Matching (GSFM), which transports the complete future skeletal trajectory through a single conditional velocity field. The trajectory produces a spatiotemporal skeleton graph, and spatial and temporal attention couple its evolution according to skeletal relations and physical time offsets. Bone directions lie on unit spheres relative to a root joint, and tangent evolution preserves input bone lengths throughout generation. We train a learned velocity field through conditional flow matching along geodesic paths connecting random trajectories centered on the last-observed pose to recorded future trajectories. Experiments on the Archive of Motion capture As Surface Shapes (AMASS) dataset evaluate prediction accuracy, diversity calibration, and motion statistics. We demonstrate the contributions of spatial and temporal message passing in the developed architecture through an ablation study. GSFM models trained on AMASS also perform competitively on the Human3.6M skeleton without parameter updates or retraining, demonstrating applicability to an unseen skeletal structure.

  • 3 authors
·
Sep 25

MotionGraphicsBench: Evaluating Motion Graphics Generation with Programmatic Verification

Large language models can generate motion graphics from static images and natural language requests, but it remains difficult to evaluate how well models can follow requests that combine spatial, appearance, and temporal requirements. We introduce MotionGraphicsBench, an expert-curated benchmark of 100 instances for animating an input static SVG with a motion edit prompt. By supplying all required visual elements, our editing task reflects a designer-like workflow and isolates motion generation from graphic generation. Derived from real-world Lottie motion designs, our benchmark contains diverse combinations of spatio-temporal animation behaviors. Each benchmark instance pairs its model input with a deterministic, human-readable verification program that accepts different valid implementations and reports which prompt requirements pass or fail, rather than comparing against a reference animation or using a VLM judge. We construct these programs with a multi-agent pipeline using human-labeled animations and synthesized test cases. On a balanced test set of 180 animations, our programs achieve 93.3% raw agreement with human judgments, compared with 83.3% for a GPT-6 Astra VLM baseline, and outperform the baseline in both approval and rejection recall. Across 47 configurations from 32 LLMs and 12 providers, pass@1 ranges from 6.0% to 67.7%. Across 15 models evaluated at their highest available reasoning effort with 32 attempts per instance, additional attempts improve every model, but pass@32 still ranges from 38.0% to 95.0%. Our analysis of verification programs reveals that generated animations often fail to match reference poses, follow requested motion trajectories, or coordinate related events. We release our benchmark at https://huggingface.co/datasets/figma-ai/motion-graphics-bench.

figma-ai Figma
·
Nov 6 3

UniMate: One Unified Model to Animate Diverse Skeletons

Recent advances in automatic rigging now deliver animation-ready 3D assets at scale, yet generating the motion to drive them remains a bottleneck. Existing learned animators are topology-constrained: they rely on category-specific templates or require per-skeleton fine-tuning and reference motions at inference. We present UniMate, a unified foundation model that synthesizes articulated motion for arbitrary skeletons from a rigged 3D asset and a text prompt, with no test-time optimization or per-skeleton retraining. UniMate introduces a topology-aware diffusion transformer, which integrates skeletal topology into attention via three mechanisms: (1) a graph-aware attention bias from pairwise joint relations and geodesic distances; (2) a spectral rotary position embedding generalizing RoPE to arbitrary kinematic trees via the graph Laplacian; and (3) a global topological conditioner attention-pooled from the rest-pose skeleton. We also curate UniML3D, 13,006 motion sequences spanning bipedal, quadrupedal, avian, marine, insectoid, serpentine, and articulated rigid objects with unified canonicalization and text pairing. Trained on this dataset, UniMate outperforms state-of-the-art baselines in quality, generalization, and efficiency, and supports zero-shot cross-topology transfer, in-betweening, expansion, and text-guided editing. Our project page is available at https://linzhanmou.com/unimate/.

Towards Physically Plausible Video Generation via VLM Planning

Video diffusion models (VDMs) have advanced significantly in recent years, enabling the generation of highly realistic videos and drawing the attention of the community in their potential as world simulators. However, despite their capabilities, VDMs often fail to produce physically plausible videos due to an inherent lack of understanding of physics, resulting in incorrect dynamics and event sequences. To address this limitation, we propose a novel two-stage image-to-video generation framework that explicitly incorporates physics. In the first stage, we employ a Vision Language Model (VLM) as a coarse-grained motion planner, integrating chain-of-thought and physics-aware reasoning to predict a rough motion trajectories/changes that approximate real-world physical dynamics while ensuring the inter-frame consistency. In the second stage, we use the predicted motion trajectories/changes to guide the video generation of a VDM. As the predicted motion trajectories/changes are rough, noise is added during inference to provide freedom to the VDM in generating motion with more fine details. Extensive experimental results demonstrate that our framework can produce physically plausible motion, and comparative evaluations highlight the notable superiority of our approach over existing methods. More video results are available on our Project Page: https://madaoer.github.io/projects/physically_plausible_video_generation.

  • 11 authors
·
Mar 30, 2025 3

FoundationMotion: Auto-Labeling and Reasoning about Spatial Movement in Videos

Motion understanding is fundamental to physical reasoning, enabling models to infer dynamics and predict future states. However, state-of-the-art models still struggle on recent motion benchmarks, primarily due to the scarcity of large-scale, fine-grained motion datasets. Existing motion datasets are often constructed from costly manual annotation, severely limiting scalability. To address this challenge, we introduce FoundationMotion, a fully automated data curation pipeline that constructs large-scale motion datasets. Our approach first detects and tracks objects in videos to extract their trajectories, then leverages these trajectories and video frames with Large Language Models (LLMs) to generate fine-grained captions and diverse question-answer pairs about motion and spatial reasoning. Using datasets produced by this pipeline, we fine-tune open-source models including NVILA-Video-15B and Qwen2.5-7B, achieving substantial improvements in motion understanding without compromising performance on other tasks. Notably, our models outperform strong closed-source baselines like Gemini-2.5 Flash and large open-source models such as Qwen2.5-VL-72B across diverse motion understanding datasets and benchmarks. FoundationMotion thus provides a scalable solution for curating fine-grained motion datasets that enable effective fine-tuning of diverse models to enhance motion understanding and spatial reasoning capabilities.

HyperMotion: DiT-Based Pose-Guided Human Image Animation of Complex Motions

Recent advances in diffusion models have significantly improved conditional video generation, particularly in the pose-guided human image animation task. Although existing methods are capable of generating high-fidelity and time-consistent animation sequences in regular motions and static scenes, there are still obvious limitations when facing complex human body motions (Hypermotion) that contain highly dynamic, non-standard motions, and the lack of a high-quality benchmark for evaluation of complex human motion animations. To address this challenge, we introduce the Open-HyperMotionX Dataset and HyperMotionX Bench, which provide high-quality human pose annotations and curated video clips for evaluating and improving pose-guided human image animation models under complex human motion conditions. Furthermore, we propose a simple yet powerful DiT-based video generation baseline and design spatial low-frequency enhanced RoPE, a novel module that selectively enhances low-frequency spatial feature modeling by introducing learnable frequency scaling. Our method significantly improves structural stability and appearance consistency in highly dynamic human motion sequences. Extensive experiments demonstrate the effectiveness of our dataset and proposed approach in advancing the generation quality of complex human motion image animations. Code and dataset will be made publicly available.

  • 8 authors
·
May 28, 2025

TopoCap: Learning Topology-Agnostic Motion Priors for Monocular Video-to-Animation

The explosion of generative 3D assets has created a massive demand for animation, yet current motion capture methods remain brittle, restricted to species-specific templates (e.g., SMPL) or requiring labor-intensive manual rigging. We introduce TopoCap, the first unified framework capable of extracting motion from monocular video and retargeting it onto characters with arbitrary, unseen skeletal topologies, i.e., from bipeds to hexapods and inanimate objects, without test-time optimization. Our key insight is that while skeletal structures are combinatorial and discrete, the underlying physics of motion occupy a continuous, low-dimensional manifold. We materialize this insight via a two-stage generative pipeline. First, we learn a Universal Motion Manifold using a Graph CVAE that compresses heterogeneous kinematic chains into a shared, fixed-length latent code. By explicitly conditioning the decoder on a structural embedding of the target rig, we disentangle motion dynamics from skeletal topology. Second, we treat video-to-animation as a conditional flow matching problem, predicting these topology-agnostic codes from visual features. To learn this generalized prior, we introduce Mobjaverse, a massive-scale dataset curated from Objaverse-XL. Comprising over 5,000 unique skeletal topologies and 2 million frames, it exceeds the structural diversity of existing datasets by two orders of magnitude. Extensive experiments demonstrate that \MethodMotion outperforms specialist models on human and quadruped benchmarks while enabling zero-shot retargeting for the long tail of 3D creatures. Dataset is publicly available at https://huggingface.co/datasets/duckduckplz/Mobjaverse.

  • 5 authors
·
Jun 9

MechVerse: Evaluating Physical Motion Consistency in Video Generation Models

Text- and image-conditioned video generation models have achieved strong visual fidelity and temporal coherence, but they often fail to generate motion governed by kinematic and geometric constraints. In these settings, object parts must remain rigid, maintain contact or coupling with neighboring components, and transfer motion consistently across connected parts. These requirements are especially explicit in articulated mechanical assemblies, where motion is constrained by rigid-link geometry, contact/coupling relations, and transmission through kinematic chains. A generated video may therefore appear plausible while violating the intended mechanism, such as rotating a part that should translate, deforming a rigid component, breaking coupling between parts, or failing to move downstream components. To evaluate this gap, We introduce MechVerse, a benchmark for mechanically consistent image-to-video generation. MechVerse contains 21,156 synthetic clips from 1,357 mechanical assemblies across 141 categories, organized into three tiers of increasing kinematic complexity: independent articulation, pairwise coupling, and densely coupled multi-part mechanisms. Each clip is paired with a structured prompt describing part identities, stationary supports, moving components, motion primitives, direction, speed/extent, and inter-part dependencies. We evaluate proprietary, open-source, and fine-tuned image-to-video models using standard video metrics, instruction-following scores, and human judgments of motion correctness and kinematic coupling. Results show that current models can preserve appearance and smoothness while failing to generate mechanically admissible motion, with errors increasing as coupling complexity grows. MechVerse provides a benchmark for measuring and improving mechanism-aware video generation from image and language inputs.

  • 4 authors
·
May 13

CurveCodec 2: Skeleton-agnostic animation compression with a learned entropy model

Skeletal motion is stored as every joint's transform at every frame, yet most of it is implied by the body rather than by what the motion is about. Compression is one way to ask what a motion must still say once the body is known, and a production codec must answer it for any skeleton with a stated error bound. Our earlier codec, CurveCodec, matched the mean error of ACL, the production library of modern game engines, with a learned prior over sparse anchors, but not ACL's worst case, and it counted its payload as floats rather than bits. Here we ask where the redundancy of skeletal motion lies and which part of a codec a learned model should take over. Measurements give three answers. At production precision the largest saving comes from predicting each quantized curve from its own past, the second from choosing per joint, in closed loop through the hierarchy, which samples not to code. On the gaps such an encoder leaves, a nearest-neighbour oracle over millions of training samples is no better than linear interpolation, and no learned in-betweener we tried paid for itself. What a network does learn is the distribution of the residuals the codec must send. CurveCodec 2 codes every sub-track as a curve in the log map, quantized in closed loop and thinned to rate-distortion-selected keys, with residuals entropy-coded under a small learned model whose integer inference is bit-exact across platforms. Two contracts are verified on every decoded clip: ACL's own worst case per joint within a stated tolerance, or ACL's mean error per clip. On a held-out test side of 4,472 clips from 33 datasets, CurveCodec 2 needs 0.37x ACL's bytes at ACL's default precision of 0.01 cm under the worst-case contract and 0.22x at 0.1 cm under the mean contract, decodes on one CPU core, and transfers without retraining to a species absent from training. Project page: https://rubbly.cn/publications/curvecodec/

HKU-CGVU HKU-CGVU
·
Oct 2 2

Textual Decomposition Then Sub-motion-space Scattering for Open-Vocabulary Motion Generation

Text-to-motion generation is a crucial task in computer vision, which generates the target 3D motion by the given text. The existing annotated datasets are limited in scale, resulting in most existing methods overfitting to the small datasets and unable to generalize to the motions of the open domain. Some methods attempt to solve the open-vocabulary motion generation problem by aligning to the CLIP space or using the Pretrain-then-Finetuning paradigm. However, the current annotated dataset's limited scale only allows them to achieve mapping from sub-text-space to sub-motion-space, instead of mapping between full-text-space and full-motion-space (full mapping), which is the key to attaining open-vocabulary motion generation. To this end, this paper proposes to leverage the atomic motion (simple body part motions over a short time period) as an intermediate representation, and leverage two orderly coupled steps, i.e., Textual Decomposition and Sub-motion-space Scattering, to address the full mapping problem. For Textual Decomposition, we design a fine-grained description conversion algorithm, and combine it with the generalization ability of a large language model to convert any given motion text into atomic texts. Sub-motion-space Scattering learns the compositional process from atomic motions to the target motions, to make the learned sub-motion-space scattered to form the full-motion-space. For a given motion of the open domain, it transforms the extrapolation into interpolation and thereby significantly improves generalization. Our network, DSO-Net, combines textual decomposition and sub-motion-space scattering to solve the open-vocabulary motion generation. Extensive experiments demonstrate that our DSO-Net achieves significant improvements over the state-of-the-art methods on open-vocabulary motion generation. Code is available at https://vankouf.github.io/DSONet/.

  • 9 authors
·
Nov 6, 2024

Motion Tracks: A Unified Representation for Human-Robot Transfer in Few-Shot Imitation Learning

Teaching robots to autonomously complete everyday tasks remains a challenge. Imitation Learning (IL) is a powerful approach that imbues robots with skills via demonstrations, but is limited by the labor-intensive process of collecting teleoperated robot data. Human videos offer a scalable alternative, but it remains difficult to directly train IL policies from them due to the lack of robot action labels. To address this, we propose to represent actions as short-horizon 2D trajectories on an image. These actions, or motion tracks, capture the predicted direction of motion for either human hands or robot end-effectors. We instantiate an IL policy called Motion Track Policy (MT-pi) which receives image observations and outputs motion tracks as actions. By leveraging this unified, cross-embodiment action space, MT-pi completes tasks with high success given just minutes of human video and limited additional robot demonstrations. At test time, we predict motion tracks from two camera views, recovering 6DoF trajectories via multi-view synthesis. MT-pi achieves an average success rate of 86.5% across 4 real-world tasks, outperforming state-of-the-art IL baselines which do not leverage human data or our action space by 40%, and generalizes to scenarios seen only in human videos. Code and videos are available on our website https://portal-cornell.github.io/motion_track_policy/.

  • 5 authors
·
Jan 12, 2025

Motion-2-to-3: Leveraging 2D Motion Data to Boost 3D Motion Generation

Text-driven human motion synthesis is capturing significant attention for its ability to effortlessly generate intricate movements from abstract text cues, showcasing its potential for revolutionizing motion design not only in film narratives but also in virtual reality experiences and computer game development. Existing methods often rely on 3D motion capture data, which require special setups resulting in higher costs for data acquisition, ultimately limiting the diversity and scope of human motion. In contrast, 2D human videos offer a vast and accessible source of motion data, covering a wider range of styles and activities. In this paper, we explore leveraging 2D human motion extracted from videos as an alternative data source to improve text-driven 3D motion generation. Our approach introduces a novel framework that disentangles local joint motion from global movements, enabling efficient learning of local motion priors from 2D data. We first train a single-view 2D local motion generator on a large dataset of text-motion pairs. To enhance this model to synthesize 3D motion, we fine-tune the generator with 3D data, transforming it into a multi-view generator that predicts view-consistent local joint motion and root dynamics. Experiments on the HumanML3D dataset and novel text prompts demonstrate that our method efficiently utilizes 2D data, supporting realistic 3D human motion generation and broadening the range of motion types it supports. Our code will be made publicly available at https://zju3dv.github.io/Motion-2-to-3/.

  • 11 authors
·
Dec 17, 2024

Single Motion Diffusion

Synthesizing realistic animations of humans, animals, and even imaginary creatures, has long been a goal for artists and computer graphics professionals. Compared to the imaging domain, which is rich with large available datasets, the number of data instances for the motion domain is limited, particularly for the animation of animals and exotic creatures (e.g., dragons), which have unique skeletons and motion patterns. In this work, we present a Single Motion Diffusion Model, dubbed SinMDM, a model designed to learn the internal motifs of a single motion sequence with arbitrary topology and synthesize motions of arbitrary length that are faithful to them. We harness the power of diffusion models and present a denoising network explicitly designed for the task of learning from a single input motion. SinMDM is designed to be a lightweight architecture, which avoids overfitting by using a shallow network with local attention layers that narrow the receptive field and encourage motion diversity. SinMDM can be applied in various contexts, including spatial and temporal in-betweening, motion expansion, style transfer, and crowd animation. Our results show that SinMDM outperforms existing methods both in quality and time-space efficiency. Moreover, while current approaches require additional training for different applications, our work facilitates these applications at inference time. Our code and trained models are available at https://sinmdm.github.io/SinMDM-page.

  • 6 authors
·
Feb 12, 2023

Wan-Move: Motion-controllable Video Generation via Latent Trajectory Guidance

We present Wan-Move, a simple and scalable framework that brings motion control to video generative models. Existing motion-controllable methods typically suffer from coarse control granularity and limited scalability, leaving their outputs insufficient for practical use. We narrow this gap by achieving precise and high-quality motion control. Our core idea is to directly make the original condition features motion-aware for guiding video synthesis. To this end, we first represent object motions with dense point trajectories, allowing fine-grained control over the scene. We then project these trajectories into latent space and propagate the first frame's features along each trajectory, producing an aligned spatiotemporal feature map that tells how each scene element should move. This feature map serves as the updated latent condition, which is naturally integrated into the off-the-shelf image-to-video model, e.g., Wan-I2V-14B, as motion guidance without any architecture change. It removes the need for auxiliary motion encoders and makes fine-tuning base models easily scalable. Through scaled training, Wan-Move generates 5-second, 480p videos whose motion controllability rivals Kling 1.5 Pro's commercial Motion Brush, as indicated by user studies. To support comprehensive evaluation, we further design MoveBench, a rigorously curated benchmark featuring diverse content categories and hybrid-verified annotations. It is distinguished by larger data volume, longer video durations, and high-quality motion annotations. Extensive experiments on MoveBench and the public dataset consistently show Wan-Move's superior motion quality. Code, models, and benchmark data are made publicly available.

AlibabaTongyiLab TongyiLab
·
Dec 9, 2025 5

Stable Part Diffusion 4D: Multi-View RGB and Kinematic Parts Video Generation

We present Stable Part Diffusion 4D (SP4D), a framework for generating paired RGB and kinematic part videos from monocular inputs. Unlike conventional part segmentation methods that rely on appearance-based semantic cues, SP4D learns to produce kinematic parts - structural components aligned with object articulation and consistent across views and time. SP4D adopts a dual-branch diffusion model that jointly synthesizes RGB frames and corresponding part segmentation maps. To simplify the architecture and flexibly enable different part counts, we introduce a spatial color encoding scheme that maps part masks to continuous RGB-like images. This encoding allows the segmentation branch to share the latent VAE from the RGB branch, while enabling part segmentation to be recovered via straightforward post-processing. A Bidirectional Diffusion Fusion (BiDiFuse) module enhances cross-branch consistency, supported by a contrastive part consistency loss to promote spatial and temporal alignment of part predictions. We demonstrate that the generated 2D part maps can be lifted to 3D to derive skeletal structures and harmonic skinning weights with few manual adjustments. To train and evaluate SP4D, we construct KinematicParts20K, a curated dataset of over 20K rigged objects selected and processed from Objaverse XL (Deitke et al., 2023), each paired with multi-view RGB and part video sequences. Experiments show that SP4D generalizes strongly to diverse scenarios, including real-world videos, novel generated objects, and rare articulated poses, producing kinematic-aware outputs suitable for downstream animation and motion-related tasks.

  • 5 authors
·
Sep 12, 2025 2

Robotic VLA Benefits from Joint Learning with Motion Image Diffusion

Vision-Language-Action (VLA) models have achieved remarkable progress in robotic manipulation by mapping multimodal observations and instructions directly to actions. However, they typically mimic expert trajectories without predictive motion reasoning, which limits their ability to reason about what actions to take. To address this limitation, we propose joint learning with motion image diffusion, a novel strategy that enhances VLA models with motion reasoning capabilities. Our method extends the VLA architecture with a dual-head design: while the action head predicts action chunks as in vanilla VLAs, an additional motion head, implemented as a Diffusion Transformer (DiT), predicts optical-flow-based motion images that capture future dynamics. The two heads are trained jointly, enabling the shared VLM backbone to learn representations that couple robot control with motion knowledge. This joint learning builds temporally coherent and physically grounded representations without modifying the inference pathway of standard VLAs, thereby maintaining test-time latency. Experiments in both simulation and real-world environments demonstrate that joint learning with motion image diffusion improves the success rate of pi-series VLAs to 97.5% on the LIBERO benchmark and 58.0% on the RoboTwin benchmark, yielding a 23% improvement in real-world performance and validating its effectiveness in enhancing the motion reasoning capability of large-scale VLAs.

  • 13 authors
·
Dec 19, 2025

Planning with Sketch-Guided Verification for Physics-Aware Video Generation

Recent video generation approaches increasingly rely on planning intermediate control signals such as object trajectories to improve temporal coherence and motion fidelity. However, these methods mostly employ single-shot plans that are typically limited to simple motions, or iterative refinement which requires multiple calls to the video generator, incuring high computational cost. To overcome these limitations, we propose SketchVerify, a training-free, sketch-verification-based planning framework that improves motion planning quality with more dynamically coherent trajectories (i.e., physically plausible and instruction-consistent motions) prior to full video generation by introducing a test-time sampling and verification loop. Given a prompt and a reference image, our method predicts multiple candidate motion plans and ranks them using a vision-language verifier that jointly evaluates semantic alignment with the instruction and physical plausibility. To efficiently score candidate motion plans, we render each trajectory as a lightweight video sketch by compositing objects over a static background, which bypasses the need for expensive, repeated diffusion-based synthesis while achieving comparable performance. We iteratively refine the motion plan until a satisfactory one is identified, which is then passed to the trajectory-conditioned generator for final synthesis. Experiments on WorldModelBench and PhyWorldBench demonstrate that our method significantly improves motion quality, physical realism, and long-term consistency compared to competitive baselines while being substantially more efficient. Our ablation study further shows that scaling up the number of trajectory candidates consistently enhances overall performance.

  • 8 authors
·
Nov 21, 2025 2

MotionBlind: Probing the Illusion of Motion Understanding in Video-LLMs

Video large language models (Video-LLMs) are increasingly used as the perceptual front end of world models, a role that assumes they can read motion: how fast something moves, which way it travels, how hard it is pushed. We show they cannot. A Video-LLM can watch two clips of the same person in the same room, name every object in both, and still fail to say which clip moves faster. We introduce MotionBlind, a contrastive benchmark of self-recorded video for physically grounded motion(speed, magnitude, and direction), the variables a world model must predict. Each instance is a pair of near-identical clips that differ only in motion. Each clip carries two complementary yes/no questions, giving four items per instance, and a model earns credit only if all four are correct. We report Instance Accuracy(IAcc), which has a 6.25% chance floor. Single-frame, appearance, and language-only shortcuts all collapse to it. MotionBlind complements the recent TimeBlind benchmark. We run a controlled study of six open and two frontier Video-LLMs, varying whether the video is present, whether frames are shown in the correct temporal order, and how frames are sampled (1 to 24 frames, four selection strategies). Open models sit near the 6.25% floor, and scale does not help. Removing the video drops every model to zero IAcc, and shuffling frames collapses IAcc to chance, so the task genuinely needs video in order. Neither more frames nor smarter frame selection closes the gap, because these change which frames are seen, not whether motion is read. Only Gemini3.1 Pro clears the benchmark overall, and even it fails on speed. A frontend that cannot tell two speeds of the same action apart is not yet a trustworthy source of supervision, reward, or evaluation for a world model.

  • 10 authors
·
Sep 7

Sitcom-Crafter: A Plot-Driven Human Motion Generation System in 3D Scenes

Recent advancements in human motion synthesis have focused on specific types of motions, such as human-scene interaction, locomotion or human-human interaction, however, there is a lack of a unified system capable of generating a diverse combination of motion types. In response, we introduce Sitcom-Crafter, a comprehensive and extendable system for human motion generation in 3D space, which can be guided by extensive plot contexts to enhance workflow efficiency for anime and game designers. The system is comprised of eight modules, three of which are dedicated to motion generation, while the remaining five are augmentation modules that ensure consistent fusion of motion sequences and system functionality. Central to the generation modules is our novel 3D scene-aware human-human interaction module, which addresses collision issues by synthesizing implicit 3D Signed Distance Function (SDF) points around motion spaces, thereby minimizing human-scene collisions without additional data collection costs. Complementing this, our locomotion and human-scene interaction modules leverage existing methods to enrich the system's motion generation capabilities. Augmentation modules encompass plot comprehension for command generation, motion synchronization for seamless integration of different motion types, hand pose retrieval to enhance motion realism, motion collision revision to prevent human collisions, and 3D retargeting to ensure visual fidelity. Experimental evaluations validate the system's ability to generate high-quality, diverse, and physically realistic motions, underscoring its potential for advancing creative workflows. Project page: https://windvchen.github.io/Sitcom-Crafter.

  • 6 authors
·
Oct 14, 2024

MoCapAnything: Unified 3D Motion Capture for Arbitrary Skeletons from Monocular Videos

Motion capture now underpins content creation far beyond digital humans, yet most existing pipelines remain species- or template-specific. We formalize this gap as Category-Agnostic Motion Capture (CAMoCap): given a monocular video and an arbitrary rigged 3D asset as a prompt, the goal is to reconstruct a rotation-based animation such as BVH that directly drives the specific asset. We present MoCapAnything, a reference-guided, factorized framework that first predicts 3D joint trajectories and then recovers asset-specific rotations via constraint-aware inverse kinematics. The system contains three learnable modules and a lightweight IK stage: (1) a Reference Prompt Encoder that extracts per-joint queries from the asset's skeleton, mesh, and rendered images; (2) a Video Feature Extractor that computes dense visual descriptors and reconstructs a coarse 4D deforming mesh to bridge the gap between video and joint space; and (3) a Unified Motion Decoder that fuses these cues to produce temporally coherent trajectories. We also curate Truebones Zoo with 1038 motion clips, each providing a standardized skeleton-mesh-render triad. Experiments on both in-domain benchmarks and in-the-wild videos show that MoCapAnything delivers high-quality skeletal animations and exhibits meaningful cross-species retargeting across heterogeneous rigs, enabling scalable, prompt-driven 3D motion capture for arbitrary assets. Project page: https://animotionlab.github.io/MoCapAnything/

  • 11 authors
·
Dec 11, 2025 3

Programmable Motion Generation for Open-Set Motion Control Tasks

Character animation in real-world scenarios necessitates a variety of constraints, such as trajectories, key-frames, interactions, etc. Existing methodologies typically treat single or a finite set of these constraint(s) as separate control tasks. They are often specialized, and the tasks they address are rarely extendable or customizable. We categorize these as solutions to the close-set motion control problem. In response to the complexity of practical motion control, we propose and attempt to solve the open-set motion control problem. This problem is characterized by an open and fully customizable set of motion control tasks. To address this, we introduce a new paradigm, programmable motion generation. In this paradigm, any given motion control task is broken down into a combination of atomic constraints. These constraints are then programmed into an error function that quantifies the degree to which a motion sequence adheres to them. We utilize a pre-trained motion generation model and optimize its latent code to minimize the error function of the generated motion. Consequently, the generated motion not only inherits the prior of the generative model but also satisfies the required constraints. Experiments show that we can generate high-quality motions when addressing a wide range of unseen tasks. These tasks encompass motion control by motion dynamics, geometric constraints, physical laws, interactions with scenes, objects or the character own body parts, etc. All of these are achieved in a unified approach, without the need for ad-hoc paired training data collection or specialized network designs. During the programming of novel tasks, we observed the emergence of new skills beyond those of the prior model. With the assistance of large language models, we also achieved automatic programming. We hope that this work will pave the way for the motion control of general AI agents.

  • 5 authors
·
May 29, 2024

Multi-FLEX: An Automatic Task Sequence Execution Framework to Enable Reactive Motion Planning for Multi-Robot Applications

In this letter, an integrated task planning and reactive motion planning framework termed Multi-FLEX is presented that targets real-world, industrial multi-robot applications. Reactive motion planning has been attractive for the purposes of collision avoidance, particularly when there are sources of uncertainty and variation. Most industrial applications, though, typically require parts of motion to be at least partially non-reactive in order to achieve functional objectives. Multi-FLEX resolves this dissonance and enables such applications to take advantage of reactive motion planning. The Multi-FLEX framework achieves 1) coordination of motion requests to resolve task-level conflicts and overlaps, 2) incorporation of application-specific task constraints into online motion planning using the new concepts of task dependency accommodation, task decomposition, and task bundling, and 3) online generation of robot trajectories using a custom, online reactive motion planner. This planner combines fast-to-create, sparse dynamic roadmaps (to find a complete path to the goal) with fast-to-execute, short-horizon, online, optimization-based local planning (for collision avoidance and high performance). To demonstrate, we use two six-degree-of-freedom, high-speed industrial robots in a deburring application to show the ability of this approach to not just handle collision avoidance and task variations, but to also achieve industrial applications.

  • 6 authors
·
Jan 30, 2024

Overcoming Dynamics-Blindness: Training-Free Pace-and-Path Correction for VLA Models

Vision-Language-Action (VLA) models achieve remarkable flexibility and generalization beyond classical control paradigms. However, most prevailing VLAs are trained under a single-frame observation paradigm, which leaves them structurally blind to temporal dynamics. Consequently, these models degrade severely in non-stationary scenarios, even when trained or finetuned on dynamic datasets. Existing approaches either require expensive retraining or suffer from latency bottlenecks and poor temporal consistency across action chunks. We propose Pace-and-Path Correction, a training-free, closed-form inference-time operator that wraps any chunked-action VLA. From a single quadratic cost, joint minimization yields a unified solution that decomposes orthogonally into two distinct channels. The pace channel compresses execution along the planned direction, while the path channel applies an orthogonal spatial offset, jointly absorbing the perceived dynamics within the chunk window. We evaluate our approach on a comprehensive diagnostic benchmark MoveBench designed to isolate motion as the sole controlled variable. Empirical results demonstrate that our framework consistently outperforms state-of-the-art training-free wrappers and dynamic-adaptive methods and improves success rates by up to 28.8% and 25.9% in absolute terms over foundational VLA models in dynamic-only and static-dynamic mixed environments, respectively.

  • 9 authors
·
May 13 2

Follow-Your-Click: Open-domain Regional Image Animation via Short Prompts

Despite recent advances in image-to-video generation, better controllability and local animation are less explored. Most existing image-to-video methods are not locally aware and tend to move the entire scene. However, human artists may need to control the movement of different objects or regions. Additionally, current I2V methods require users not only to describe the target motion but also to provide redundant detailed descriptions of frame contents. These two issues hinder the practical utilization of current I2V tools. In this paper, we propose a practical framework, named Follow-Your-Click, to achieve image animation with a simple user click (for specifying what to move) and a short motion prompt (for specifying how to move). Technically, we propose the first-frame masking strategy, which significantly improves the video generation quality, and a motion-augmented module equipped with a short motion prompt dataset to improve the short prompt following abilities of our model. To further control the motion speed, we propose flow-based motion magnitude control to control the speed of target movement more precisely. Our framework has simpler yet precise user control and better generation performance than previous methods. Extensive experiments compared with 7 baselines, including both commercial tools and research methods on 8 metrics, suggest the superiority of our approach. Project Page: https://follow-your-click.github.io/

  • 11 authors
·
Mar 13, 2024 5

EvAnimate: Event-conditioned Image-to-Video Generation for Human Animation

Conditional human animation transforms a static reference image into a dynamic sequence by applying motion cues such as poses. These motion cues are typically derived from video data but are susceptible to limitations including low temporal resolution, motion blur, overexposure, and inaccuracies under low-light conditions. In contrast, event cameras provide data streams with exceptionally high temporal resolution, a wide dynamic range, and inherent resistance to motion blur and exposure issues. In this work, we propose EvAnimate, a framework that leverages event streams as motion cues to animate static human images. Our approach employs a specialized event representation that transforms asynchronous event streams into 3-channel slices with controllable slicing rates and appropriate slice density, ensuring compatibility with diffusion models. Subsequently, a dual-branch architecture generates high-quality videos by harnessing the inherent motion dynamics of the event streams, thereby enhancing both video quality and temporal consistency. Specialized data augmentation strategies further enhance cross-person generalization. Finally, we establish a new benchmarking, including simulated event data for training and validation, and a real-world event dataset capturing human actions under normal and extreme scenarios. The experiment results demonstrate that EvAnimate achieves high temporal fidelity and robust performance in scenarios where traditional video-derived cues fall short.

  • 4 authors
·
Mar 24, 2025

MotionCrafter: One-Shot Motion Customization of Diffusion Models

The essence of a video lies in its dynamic motions, including character actions, object movements, and camera movements. While text-to-video generative diffusion models have recently advanced in creating diverse contents, controlling specific motions through text prompts remains a significant challenge. A primary issue is the coupling of appearance and motion, often leading to overfitting on appearance. To tackle this challenge, we introduce MotionCrafter, a novel one-shot instance-guided motion customization method. MotionCrafter employs a parallel spatial-temporal architecture that injects the reference motion into the temporal component of the base model, while the spatial module is independently adjusted for character or style control. To enhance the disentanglement of motion and appearance, we propose an innovative dual-branch motion disentanglement approach, comprising a motion disentanglement loss and an appearance prior enhancement strategy. During training, a frozen base model provides appearance normalization, effectively separating appearance from motion and thereby preserving diversity. Comprehensive quantitative and qualitative experiments, along with user preference tests, demonstrate that MotionCrafter can successfully integrate dynamic motions while preserving the coherence and quality of the base model with a wide range of appearance generation capabilities. Project page: https://zyxelsa.github.io/homepage-motioncrafter. Codes are available at https://github.com/zyxElsa/MotionCrafter.

  • 7 authors
·
Dec 8, 2023

DrawMotion: Generating 3D Human Motions by Freehand Drawing

Text-to-motion generation, which translates textual descriptions into human motions, faces the challenge that users often struggle to precisely convey their intended motions through text alone. To address this issue, this paper introduces DrawMotion, an efficient diffusion-based framework designed for multi-condition scenarios. DrawMotion generates motions based on both a conventional text condition and a novel hand-drawing condition, which provide semantic and spatial control over the generated motions, respectively. Specifically, we tackle the fine-grained motion generation task from three perspectives: 1) freehand drawing condition. To accurately capture users' intended motions without requiring tedious textual input, we develop an algorithm to automatically generate hand-drawn stickman sketches across different dataset formats; 2) multi-condition fusion. We propose a Multi-Condition Module (MCM) that is integrated into the diffusion process, enabling the model to exploit all possible condition combinations while reducing computational complexity compared to conventional approaches; and 3) training-free guidance. Notably, the MCM in DrawMotion ensures that its intermediate features lie in a continuous space, allowing classifier-guidance gradients to update the features and thereby aligning the generated motions with user intentions while preserving fidelity. Quantitative experiments and user studies demonstrate that the freehand drawing approach reduces user time by approximately 46.7% when generating motions aligned with their imagination. The code, demos, and relevant data are publicly available at https://github.com/InvertedForest/DrawMotion.

  • 10 authors
·
May 19 1

FineTec: Fine-Grained Action Recognition Under Temporal Corruption via Skeleton Decomposition and Sequence Completion

Recognizing fine-grained actions from temporally corrupted skeleton sequences remains a significant challenge, particularly in real-world scenarios where online pose estimation often yields substantial missing data. Existing methods often struggle to accurately recover temporal dynamics and fine-grained spatial structures, resulting in the loss of subtle motion cues crucial for distinguishing similar actions. To address this, we propose FineTec, a unified framework for Fine-grained action recognition under Temporal Corruption. FineTec first restores a base skeleton sequence from corrupted input using context-aware completion with diverse temporal masking. Next, a skeleton-based spatial decomposition module partitions the skeleton into five semantic regions, further divides them into dynamic and static subgroups based on motion variance, and generates two augmented skeleton sequences via targeted perturbation. These, along with the base sequence, are then processed by a physics-driven estimation module, which utilizes Lagrangian dynamics to estimate joint accelerations. Finally, both the fused skeleton position sequence and the fused acceleration sequence are jointly fed into a GCN-based action recognition head. Extensive experiments on both coarse-grained (NTU-60, NTU-120) and fine-grained (Gym99, Gym288) benchmarks show that FineTec significantly outperforms previous methods under various levels of temporal corruption. Specifically, FineTec achieves top-1 accuracies of 89.1% and 78.1% on the challenging Gym99-severe and Gym288-severe settings, respectively, demonstrating its robustness and generalizability. Code and datasets could be found at https://smartdianlab.github.io/projects-FineTec/.

  • 3 authors
·
Dec 31, 2025

DropletVideo: A Dataset and Approach to Explore Integral Spatio-Temporal Consistent Video Generation

Spatio-temporal consistency is a critical research topic in video generation. A qualified generated video segment must ensure plot plausibility and coherence while maintaining visual consistency of objects and scenes across varying viewpoints. Prior research, especially in open-source projects, primarily focuses on either temporal or spatial consistency, or their basic combination, such as appending a description of a camera movement after a prompt without constraining the outcomes of this movement. However, camera movement may introduce new objects to the scene or eliminate existing ones, thereby overlaying and affecting the preceding narrative. Especially in videos with numerous camera movements, the interplay between multiple plots becomes increasingly complex. This paper introduces and examines integral spatio-temporal consistency, considering the synergy between plot progression and camera techniques, and the long-term impact of prior content on subsequent generation. Our research encompasses dataset construction through to the development of the model. Initially, we constructed a DropletVideo-10M dataset, which comprises 10 million videos featuring dynamic camera motion and object actions. Each video is annotated with an average caption of 206 words, detailing various camera movements and plot developments. Following this, we developed and trained the DropletVideo model, which excels in preserving spatio-temporal coherence during video generation. The DropletVideo dataset and model are accessible at https://dropletx.github.io.

  • 13 authors
·
Mar 7, 2025 2

FlexiClip: Locality-Preserving Free-Form Character Animation

Animating clipart images with seamless motion while maintaining visual fidelity and temporal coherence presents significant challenges. Existing methods, such as AniClipart, effectively model spatial deformations but often fail to ensure smooth temporal transitions, resulting in artifacts like abrupt motions and geometric distortions. Similarly, text-to-video (T2V) and image-to-video (I2V) models struggle to handle clipart due to the mismatch in statistical properties between natural video and clipart styles. This paper introduces FlexiClip, a novel approach designed to overcome these limitations by addressing the intertwined challenges of temporal consistency and geometric integrity. FlexiClip extends traditional B\'ezier curve-based trajectory modeling with key innovations: temporal Jacobians to correct motion dynamics incrementally, continuous-time modeling via probability flow ODEs (pfODEs) to mitigate temporal noise, and a flow matching loss inspired by GFlowNet principles to optimize smooth motion transitions. These enhancements ensure coherent animations across complex scenarios involving rapid movements and non-rigid deformations. Extensive experiments validate the effectiveness of FlexiClip in generating animations that are not only smooth and natural but also structurally consistent across diverse clipart types, including humans and animals. By integrating spatial and temporal modeling with pre-trained video diffusion models, FlexiClip sets a new standard for high-quality clipart animation, offering robust performance across a wide range of visual content. Project Page: https://creative-gen.github.io/flexiclip.github.io/

  • 1 authors
·
Jan 15, 2025

4-Doodle: Text to 3D Sketches that Move!

We present a novel task: text-to-3D sketch animation, which aims to bring freeform sketches to life in dynamic 3D space. Unlike prior works focused on photorealistic content generation, we target sparse, stylized, and view-consistent 3D vector sketches, a lightweight and interpretable medium well-suited for visual communication and prototyping. However, this task is very challenging: (i) no paired dataset exists for text and 3D (or 4D) sketches; (ii) sketches require structural abstraction that is difficult to model with conventional 3D representations like NeRFs or point clouds; and (iii) animating such sketches demands temporal coherence and multi-view consistency, which current pipelines do not address. Therefore, we propose 4-Doodle, the first training-free framework for generating dynamic 3D sketches from text. It leverages pretrained image and video diffusion models through a dual-space distillation scheme: one space captures multi-view-consistent geometry using differentiable Bézier curves, while the other encodes motion dynamics via temporally-aware priors. Unlike prior work (e.g., DreamFusion), which optimizes from a single view per step, our multi-view optimization ensures structural alignment and avoids view ambiguity, critical for sparse sketches. Furthermore, we introduce a structure-aware motion module that separates shape-preserving trajectories from deformation-aware changes, enabling expressive motion such as flipping, rotation, and articulated movement. Extensive experiments show that our method produces temporally realistic and structurally stable 3D sketch animations, outperforming existing baselines in both fidelity and controllability. We hope this work serves as a step toward more intuitive and accessible 4D content creation.

  • 6 authors
·
Oct 29, 2025

MotionSpaceFlow: Representation-Aware Flow Matching in Direct Motion Space

Recent advances in diffusion and flow models have substantially improved text-driven human motion generation. Yet most methods generate in low-dimensional, temporally downsampled latent spaces learned primarily for reconstruction, a bottleneck that can limit generation quality and preclude direct manipulation of individual frames and joints. We introduce MotionSpaceFlow (MSFlow), a representation-aware flow-matching framework that predicts clean motion directly in continuous motion space without a learned encoder or decoder. To account for the anisotropic structure of direct motion representations, we propose representation-aware noise scaling and show how the initial Gaussian source scale governs the covariance of intermediate probability-path marginals. We further introduce a Representation-Aware Multimodal Diffusion Transformer (RA-MMDiT), which jointly updates token-level language and full-resolution motion features through joint attention while adapting temporal information flow to the motion representation: causal attention for incremental features defined by frame-to-frame changes, and bidirectional attention for global features such as absolute joint coordinates. Across different datasets and motion representations, MSFlow achieves state-of-the-art text-to-motion performance. Its global representation variant additionally enables zero-shot, inference-time control over any joint or frame through projection sampling without control-conditioned training, delivering leading motion quality with exact constraint satisfaction.

  • 2 authors
·
Sep 27

Self-Supervised Learning via Conditional Motion Propagation

Intelligent agent naturally learns from motion. Various self-supervised algorithms have leveraged motion cues to learn effective visual representations. The hurdle here is that motion is both ambiguous and complex, rendering previous works either suffer from degraded learning efficacy, or resort to strong assumptions on object motions. In this work, we design a new learning-from-motion paradigm to bridge these gaps. Instead of explicitly modeling the motion probabilities, we design the pretext task as a conditional motion propagation problem. Given an input image and several sparse flow guidance vectors on it, our framework seeks to recover the full-image motion. Compared to other alternatives, our framework has several appealing properties: (1) Using sparse flow guidance during training resolves the inherent motion ambiguity, and thus easing feature learning. (2) Solving the pretext task of conditional motion propagation encourages the emergence of kinematically-sound representations that poss greater expressive power. Extensive experiments demonstrate that our framework learns structural and coherent features; and achieves state-of-the-art self-supervision performance on several downstream tasks including semantic segmentation, instance segmentation, and human parsing. Furthermore, our framework is successfully extended to several useful applications such as semi-automatic pixel-level annotation. Project page: "http://mmlab.ie.cuhk.edu.hk/projects/CMP/".

  • 5 authors
·
Mar 27, 2019

Story-to-Motion: Synthesizing Infinite and Controllable Character Animation from Long Text

Generating natural human motion from a story has the potential to transform the landscape of animation, gaming, and film industries. A new and challenging task, Story-to-Motion, arises when characters are required to move to various locations and perform specific motions based on a long text description. This task demands a fusion of low-level control (trajectories) and high-level control (motion semantics). Previous works in character control and text-to-motion have addressed related aspects, yet a comprehensive solution remains elusive: character control methods do not handle text description, whereas text-to-motion methods lack position constraints and often produce unstable motions. In light of these limitations, we propose a novel system that generates controllable, infinitely long motions and trajectories aligned with the input text. (1) We leverage contemporary Large Language Models to act as a text-driven motion scheduler to extract a series of (text, position, duration) pairs from long text. (2) We develop a text-driven motion retrieval scheme that incorporates motion matching with motion semantic and trajectory constraints. (3) We design a progressive mask transformer that addresses common artifacts in the transition motion such as unnatural pose and foot sliding. Beyond its pioneering role as the first comprehensive solution for Story-to-Motion, our system undergoes evaluation across three distinct sub-tasks: trajectory following, temporal action composition, and motion blending, where it outperforms previous state-of-the-art motion synthesis methods across the board. Homepage: https://story2motion.github.io/.

  • 4 authors
·
Nov 13, 2023

Large Motion Model for Unified Multi-Modal Motion Generation

Human motion generation, a cornerstone technique in animation and video production, has widespread applications in various tasks like text-to-motion and music-to-dance. Previous works focus on developing specialist models tailored for each task without scalability. In this work, we present Large Motion Model (LMM), a motion-centric, multi-modal framework that unifies mainstream motion generation tasks into a generalist model. A unified motion model is appealing since it can leverage a wide range of motion data to achieve broad generalization beyond a single task. However, it is also challenging due to the heterogeneous nature of substantially different motion data and tasks. LMM tackles these challenges from three principled aspects: 1) Data: We consolidate datasets with different modalities, formats and tasks into a comprehensive yet unified motion generation dataset, MotionVerse, comprising 10 tasks, 16 datasets, a total of 320k sequences, and 100 million frames. 2) Architecture: We design an articulated attention mechanism ArtAttention that incorporates body part-aware modeling into Diffusion Transformer backbone. 3) Pre-Training: We propose a novel pre-training strategy for LMM, which employs variable frame rates and masking forms, to better exploit knowledge from diverse training data. Extensive experiments demonstrate that our generalist LMM achieves competitive performance across various standard motion generation tasks over state-of-the-art specialist models. Notably, LMM exhibits strong generalization capabilities and emerging properties across many unseen tasks. Additionally, our ablation studies reveal valuable insights about training and scaling up large motion models for future research.

  • 11 authors
·
Apr 1, 2024

MotionDuet: Dual-Conditioned 3D Human Motion Generation with Video-Regularized Text Learning

3D Human motion generation is pivotal across film, animation, gaming, and embodied intelligence. Traditional 3D motion synthesis relies on costly motion capture, while recent work shows that 2D videos provide rich, temporally coherent observations of human behavior. Existing approaches, however, either map high-level text descriptions to motion or rely solely on video conditioning, leaving a gap between generated dynamics and real-world motion statistics. We introduce MotionDuet, a multimodal framework that aligns motion generation with the distribution of video-derived representations. In this dual-conditioning paradigm, video cues extracted from a pretrained model (e.g., VideoMAE) ground low-level motion dynamics, while textual prompts provide semantic intent. To bridge the distribution gap across modalities, we propose Dual-stream Unified Encoding and Transformation (DUET) and a Distribution-Aware Structural Harmonization (DASH) loss. DUET fuses video-informed cues into the motion latent space via unified encoding and dynamic attention, while DASH aligns motion trajectories with both distributional and structural statistics of video features. An auto-guidance mechanism further balances textual and visual signals by leveraging a weakened copy of the model, enhancing controllability without sacrificing diversity. Extensive experiments demonstrate that MotionDuet generates realistic and controllable human motions, surpassing strong state-of-the-art baselines.

  • 7 authors
·
Nov 22, 2025

MotioNet: 3D Human Motion Reconstruction from Monocular Video with Skeleton Consistency

We introduce MotioNet, a deep neural network that directly reconstructs the motion of a 3D human skeleton from monocular video.While previous methods rely on either rigging or inverse kinematics (IK) to associate a consistent skeleton with temporally coherent joint rotations, our method is the first data-driven approach that directly outputs a kinematic skeleton, which is a complete, commonly used, motion representation. At the crux of our approach lies a deep neural network with embedded kinematic priors, which decomposes sequences of 2D joint positions into two separate attributes: a single, symmetric, skeleton, encoded by bone lengths, and a sequence of 3D joint rotations associated with global root positions and foot contact labels. These attributes are fed into an integrated forward kinematics (FK) layer that outputs 3D positions, which are compared to a ground truth. In addition, an adversarial loss is applied to the velocities of the recovered rotations, to ensure that they lie on the manifold of natural joint rotations. The key advantage of our approach is that it learns to infer natural joint rotations directly from the training data, rather than assuming an underlying model, or inferring them from joint positions using a data-agnostic IK solver. We show that enforcing a single consistent skeleton along with temporally coherent joint rotations constrains the solution space, leading to a more robust handling of self-occlusions and depth ambiguities.

  • 7 authors
·
Jun 21, 2020

Asynchronous Fast-Slow Vision-Language-Action Policies for Whole-Body Robotic Manipulation

Most Vision-Language-Action (VLA) systems integrate a Vision-Language Model (VLM) for semantic reasoning with an action expert generating continuous action signals, yet both typically run at a single unified frequency. As a result, policy performance is constrained by the low inference speed of large VLMs. This mandatory synchronous execution severely limits control stability and real-time performance in whole-body robotic manipulation, which involves more joints, larger motion spaces, and dynamically changing views. We introduce a truly asynchronous Fast-Slow VLA framework (DuoCore-FS), organizing the system into a fast pathway for high-frequency action generation and a slow pathway for rich VLM reasoning. The system is characterized by two key features. First, a latent representation buffer bridges the slow and fast systems. It stores instruction semantics and action-reasoning representation aligned with the scene-instruction context, providing high-level guidance to the fast pathway. Second, a whole-body action tokenizer provides a compact, unified representation of whole-body actions. Importantly, the VLM and action expert are still jointly trained end-to-end, preserving unified policy learning while enabling asynchronous execution. DuoCore-FS supports a 3B-parameter VLM while achieving 30 Hz whole-body action-chunk generation, approximately three times as fast as prior VLA models with comparable model sizes. Real-world whole-body manipulation experiments demonstrate improved task success rates and significantly enhanced responsiveness compared to synchronous Fast-Slow VLA baselines. The implementation of DuoCore-FS, including training, inference, and deployment, is provided to commercial users by Astribot as part of the Astribot robotic platform.

  • 9 authors
·
Dec 23, 2025

Controllable Longer Image Animation with Diffusion Models

Generating realistic animated videos from static images is an important area of research in computer vision. Methods based on physical simulation and motion prediction have achieved notable advances, but they are often limited to specific object textures and motion trajectories, failing to exhibit highly complex environments and physical dynamics. In this paper, we introduce an open-domain controllable image animation method using motion priors with video diffusion models. Our method achieves precise control over the direction and speed of motion in the movable region by extracting the motion field information from videos and learning moving trajectories and strengths. Current pretrained video generation models are typically limited to producing very short videos, typically less than 30 frames. In contrast, we propose an efficient long-duration video generation method based on noise reschedule specifically tailored for image animation tasks, facilitating the creation of videos over 100 frames in length while maintaining consistency in content scenery and motion coordination. Specifically, we decompose the denoise process into two distinct phases: the shaping of scene contours and the refining of motion details. Then we reschedule the noise to control the generated frame sequences maintaining long-distance noise correlation. We conducted extensive experiments with 10 baselines, encompassing both commercial tools and academic methodologies, which demonstrate the superiority of our method. Our project page: https://wangqiang9.github.io/Controllable.github.io/

  • 5 authors
·
May 27, 2024

FinePhys: Fine-grained Human Action Generation by Explicitly Incorporating Physical Laws for Effective Skeletal Guidance

Despite significant advances in video generation, synthesizing physically plausible human actions remains a persistent challenge, particularly in modeling fine-grained semantics and complex temporal dynamics. For instance, generating gymnastics routines such as "switch leap with 0.5 turn" poses substantial difficulties for current methods, often yielding unsatisfactory results. To bridge this gap, we propose FinePhys, a Fine-grained human action generation framework that incorporates Physics to obtain effective skeletal guidance. Specifically, FinePhys first estimates 2D poses in an online manner and then performs 2D-to-3D dimension lifting via in-context learning. To mitigate the instability and limited interpretability of purely data-driven 3D poses, we further introduce a physics-based motion re-estimation module governed by Euler-Lagrange equations, calculating joint accelerations via bidirectional temporal updating. The physically predicted 3D poses are then fused with data-driven ones, offering multi-scale 2D heatmap guidance for the diffusion process. Evaluated on three fine-grained action subsets from FineGym (FX-JUMP, FX-TURN, and FX-SALTO), FinePhys significantly outperforms competitive baselines. Comprehensive qualitative results further demonstrate FinePhys's ability to generate more natural and plausible fine-grained human actions.

  • 6 authors
·
May 19, 2025 1

Discovering and using Spelke segments

Segments in computer vision are often defined by semantic considerations and are highly dependent on category-specific conventions. In contrast, developmental psychology suggests that humans perceive the world in terms of Spelke objects--groupings of physical things that reliably move together when acted on by physical forces. Spelke objects thus operate on category-agnostic causal motion relationships which potentially better support tasks like manipulation and planning. In this paper, we first benchmark the Spelke object concept, introducing the SpelkeBench dataset that contains a wide variety of well-defined Spelke segments in natural images. Next, to extract Spelke segments from images algorithmically, we build SpelkeNet, a class of visual world models trained to predict distributions over future motions. SpelkeNet supports estimation of two key concepts for Spelke object discovery: (1) the motion affordance map, identifying regions likely to move under a poke, and (2) the expected-displacement map, capturing how the rest of the scene will move. These concepts are used for "statistical counterfactual probing", where diverse "virtual pokes" are applied on regions of high motion-affordance, and the resultant expected displacement maps are used define Spelke segments as statistical aggregates of correlated motion statistics. We find that SpelkeNet outperforms supervised baselines like SegmentAnything (SAM) on SpelkeBench. Finally, we show that the Spelke concept is practically useful for downstream applications, yielding superior performance on the 3DEditBench benchmark for physical object manipulation when used in a variety of off-the-shelf object manipulation models.

  • 13 authors
·
Jul 21, 2025 2