new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 16

Position Bias is Hidden Behind Ceiling Effects: A Permutation Diagnostic for LLM Benchmarks

Position bias in multiple-choice LLM evaluation is widely cited as a confound in capability comparisons, but published measurements rely on single answer-order shuffles whose results confound the bias signal with content-level noise and sampling stochasticity. I introduce inspect_permute, an open-source extension to the inspect_ai evaluation framework that runs exhaustive answer-order permutations per question and reports the chi-squared / Cramer V signature of position bias with bootstrap confidence intervals. I apply the tool across four vendors (gpt-4o-mini, claude-haiku-4-5, gemini-2.5-flash, grok-3) on five MMLU subjects, 24,000 API calls under temperature-0 generation, with falsifier predictions pre-registered via a public SHA-256 hash before half the data was observed. Position bias turns out to be statistically detectable only within a roughly 60-95% base-accuracy Goldilocks zone. Below it, processing-load dominance swamps subject-specific signal; above it, ceiling effects compress the variance below the chi-squared test resolution. Detectable cells separate into two mechanism types: monotone A-to-D decrease (processing_load, in low-tier models) and non-monotone D-drop (content_ambiguity, in a narrow capability band). Standard MMLU places every frontier-tier model above the detection band, so absence of signal there should be read as not measurable, not unbiased. Together with the ceiling-effect characterisation in arXiv:2606.26185, this work brackets the detectable region of position-bias measurement and makes the field central question askable in a verifiable form. Package, data, preregistration under MIT.

  • 1 authors
·
Jul 22

Learning Where to Split: Dynamic Band Splitting for Audio Source Separation

Audio source separation models must preserve fine spectral structure while keeping the cost of the separator tractable. Band-split architectures reduce this cost by manually partitioning the spectrum into predefined frequency bands and encoding each band as a token, but the same boundaries are used for every mixture. Because informative spectral structure varies with source content, fixed boundaries can merge discriminative components or spend tokens where little resolution is needed. We introduce Dynamic Band Splitting (DBS), an end-to-end framework that adapts boundary locations and band widths to each mixture under a fixed band-token budget. DBS predicts content-conditioned boundary scores within frequency blocks, selects a prescribed number of boundaries using hard Top-K, and applies content-dependent pooling to obtain compact band tokens. After separation, it smooths and expands these tokens to the original STFT grid, refines them along frequency, and decodes complex masks with a frequency-shared head. DBS improved separation over the corresponding static models on DnR v2, MUSDB18-HQ, and EchoSet, with DBS-BSRNN achieving relative gain of 29.0% in average SI-SDR on DnR v2. These results and boundary analyses on DnR v2 show that content-adaptive frequency partitioning benefits multiple separator backbones under a fixed band-token budget. Code and audio demos are available at https://cslikai.cn/Dynamic-Band-Splitting

Exploring Frequency-Domain Feature Modeling for HRTF Magnitude Upsampling

Accurate upsampling of Head-Related Transfer Functions (HRTFs) from sparse measurements is crucial for personalized spatial audio rendering. Traditional interpolation methods, such as kernel-based weighting or basis function expansions, rely on measurements from a single subject and are limited by the spatial sampling theorem, resulting in significant performance degradation under sparse sampling. Recent learning-based methods alleviate this limitation by leveraging cross-subject information, yet most existing neural architectures primarily focus on modeling spatial relationships across directions, while spectral dependencies along the frequency dimension are often modeled implicitly or treated independently. However, HRTF magnitude responses exhibit strong local continuity and long-range structure in the frequency domain, which are not fully exploited. This work investigates frequency-domain feature modeling by examining how different architectural choices, ranging from per-frequency multilayer perceptrons to convolutional, dilated convolutional, and attention-based models, affect performance under varying sparsity levels, showing that explicit spectral modeling consistently improves reconstruction accuracy, particularly under severe sparsity. Motivated by this observation, a frequency-domain Conformer-based architecture is adopted to jointly capture local spectral continuity and long-range frequency correlations. Experimental results on the SONICOM and HUTUBS datasets demonstrate that the proposed method achieves state-of-the-art performance in terms of interaural level difference and log-spectral distortion.

  • 6 authors
·
Feb 11

Spatial-frequency channels, shape bias, and adversarial robustness

What spatial frequency information do humans and neural networks use to recognize objects? In neuroscience, critical band masking is an established tool that can reveal the frequency-selective filters used for object recognition. Critical band masking measures the sensitivity of recognition performance to noise added at each spatial frequency. Existing critical band masking studies show that humans recognize periodic patterns (gratings) and letters by means of a spatial-frequency filter (or "channel'') that has a frequency bandwidth of one octave (doubling of frequency). Here, we introduce critical band masking as a task for network-human comparison and test 14 humans and 76 neural networks on 16-way ImageNet categorization in the presence of narrowband noise. We find that humans recognize objects in natural images using the same one-octave-wide channel that they use for letters and gratings, making it a canonical feature of human object recognition. On the other hand, the neural network channel, across various architectures and training strategies, is 2-4 times as wide as the human channel. In other words, networks are vulnerable to high and low frequency noise that does not affect human performance. Adversarial and augmented-image training are commonly used to increase network robustness and shape bias. Does this training align network and human object recognition channels? Three network channel properties (bandwidth, center frequency, peak noise sensitivity) correlate strongly with shape bias (53% variance explained) and with robustness of adversarially-trained networks (74% variance explained). Adversarial training increases robustness but expands the channel bandwidth even further away from the human bandwidth. Thus, critical band masking reveals that the network channel is more than twice as wide as the human channel, and that adversarial training only increases this difference.

  • 4 authors
·
Sep 22, 2023

Fourier is Frontier: Frequency-Aware Autoencoding for High-Fidelity Music Reconstruction

Continuous-latent audio autoencoders form the backbone of latent music generators, yet decoders at high compression rates commonly exhibit three failure modes: high-frequency loss, phase incoherence, and stereo-image collapse. These share a structural root: waveform autoencoders lack an explicit frequency axis, leaving no handle for targeted per-band correction. Among five matched-budget representations, the complex STFT achieves the lowest full-band and high-frequency spectral distances, providing direct access to magnitude and phase at every bin. Building on this, we present ear-VAE2, a complex-spectral autoencoder with cross-channel interaction. Spec-SnakeBeta learns a periodic activation per frequency bin with frequency-dependent initialization, outperforming other activation variants while using fewer parameters than the fully independent variant. Duplex-Aware Refiner applies band-specific corrections to magnitude and phase following duplex theory of sound localization. On the 546-track Song Describer Dataset, ear-VAE2 achieves the best point estimates on five of seven reconstruction metrics. The Duplex-Aware Refiner reduces Mel Distance by 19.4% and uses ~45% fewer residual-output dimensions than the Unconstrained Refiner, while also lowering spectral distances, spatial-cue errors, and receiving higher ratings from professional engineers. The downstream generator using ear-VAE2 latents achieves better point estimates on all 12 automatic metrics.Demo page is available at https://eps-acoustic-revolution-lab.github.io/EAR_VAE2/.

  • 3 authors
·
Aug 19

Spectral Bottleneck in Deep Neural Networks: Noise is All You Need

Deep neural networks are known to exhibit a spectral learning bias, wherein low-frequency components are learned early in training, while high-frequency modes emerge more gradually in later epochs. However, when the target signal lacks low-frequency components and is dominated by broadband high frequencies, training suffers from a 'spectral bottleneck', and the model fails to reconstruct the entire signal, including the frequency components that lie within the network's representational capacity. We examine such a scenario in the context of implicit neural representations (INRs) with sinusoidal representation networks (SIRENs), focusing on the challenge of fitting high-frequency-dominant signals that are susceptible to spectral bottleneck. To effectively fit any target signal irrespective of it's frequency content, we propose a generalized target-aware 'weight perturbation scheme' (WINNER - weight initialization with noise for neural representations) for network initialization. The scheme perturbs uniformly initialized weights with Gaussian noise, where the noise scales are adaptively determined by the spectral centroid of the target signal. We show that the noise scales can provide control over the spectra of network activations and the eigenbasis of the empirical neural tangent kernel. This method not only addresses the spectral bottleneck but also yields faster convergence and with improved representation accuracy, outperforming state-of-the-art approaches in audio fitting and achieving notable gains in image fitting and denoising tasks. Beyond signal reconstruction, our approach opens new directions for adaptive weight initialization strategies in computer vision and scientific machine learning.

  • 5 authors
·
Sep 9, 2025

GB-LSR: A Fast Local Spectral Image Representation with a Single Global Bandwidth for Continuous Reconstruction and Super-Resolution

We present GB-LSR (Global-Bandwidth Local Spectral Representation), a fixed-grid local spectral representation for continuous image reconstruction. The image domain is partitioned into non-overlapping square patches, each carrying coefficients for a truncated Fourier basis predicted from shared convolutional-encoder features. A single trainable scalar bandwidth is shared globally across all patches and images, and reconstruction at any continuous coordinate is a fixed-size basis contraction whose cost is independent of image size. We study three bandwidth-handling variants: a trainable global scalar (main), a fixed global scalar, and a per-patch bandwidth field. On a standardized native-reconstruction benchmark across Kodak, Set14, and Urban100, the main variant outperforms matched-budget amortized LIIF / LTE / WIRE re-implementations by 2.8-3.6 dB PSNR and 0.11-0.15 LPIPS, while running at roughly one-quarter of the slowest baseline's inference cost. The single global scalar suffices empirically: per-patch adaptive-bandwidth alternatives do not improve over it on either a closed-form locality diagnostic or an end-to-end ablation. In a separate arbitrary-scale super-resolution (ASR) extension, GB-LSR achieves competitive PSNR-Y under a canonical-style SR protocol and runs 1.44x faster than LIIF-RDN and 3.25x faster than LTE-SwinIR at x4; within the same extension, a variant trained and evaluated without 4-corner local-ensemble averaging gives a 1.77x speedup with 35% lower peak memory and negligible PSNR change, while additionally widening the RDN encoder from 64 to 96 channels gives a small positive PSNR shift with a 1.58x speedup and 31% lower peak memory. Native-reconstruction claims are scoped to the matched-budget amortized protocol, and ASR claims are scoped to a separate canonical-style SR protocol.

  • 2 authors
·
Jun 16

When Semantic Segmentation Meets Frequency Aliasing

Despite recent advancements in semantic segmentation, where and what pixels are hard to segment remains largely unexplored. Existing research only separates an image into easy and hard regions and empirically observes the latter are associated with object boundaries. In this paper, we conduct a comprehensive analysis of hard pixel errors, categorizing them into three types: false responses, merging mistakes, and displacements. Our findings reveal a quantitative association between hard pixels and aliasing, which is distortion caused by the overlapping of frequency components in the Fourier domain during downsampling. To identify the frequencies responsible for aliasing, we propose using the equivalent sampling rate to calculate the Nyquist frequency, which marks the threshold for aliasing. Then, we introduce the aliasing score as a metric to quantify the extent of aliasing. While positively correlated with the proposed aliasing score, three types of hard pixels exhibit different patterns. Here, we propose two novel de-aliasing filter (DAF) and frequency mixing (FreqMix) modules to alleviate aliasing degradation by accurately removing or adjusting frequencies higher than the Nyquist frequency. The DAF precisely removes the frequencies responsible for aliasing before downsampling, while the FreqMix dynamically selects high-frequency components within the encoder block. Experimental results demonstrate consistent improvements in semantic segmentation and low-light instance segmentation tasks. The code is available at: https://github.com/Linwei-Chen/Seg-Aliasing.

  • 3 authors
·
Mar 13, 2024

Experimental Demonstration of a Balanced Travelling Wave Parametric Amplifier

Superconducting travelling-wave parametric amplifiers (TWPAs) provide broadband gain, low added noise, and high dynamic range, making them attractive for applications requiring wide instantaneous bandwidth. This is crucial for amplifying multiplexed narrow band signals spread over a wide frequency range, such as qubit resonator arrays, or amplifying inherently wide band signals, such as in spectrometers or radiometers. In many cases, however, the useful bandwidth of a TWPA is limited by the production of the idler tone at an image frequency. For three-wave-mixing (3WM) TWPAs, for example, an input signal at f_s is indistinguishable from one at f_p - f_s, which can produce spectral ambiguity when the input spectrum is broadband or not known in advance. We experimentally demonstrate a balanced architecture that doubles the instantaneous image-rejected bandwidth available to a 3WM TWPA by spatially separating the amplified signal from the output pump and generated idler, which resolves the sideband degeneracy. The architecture consists of two amplifiers connected between a pair of 180^{circ} hybrid couplers, with the signal and pump injected and output through the sum and difference ports, respectively. Using two kinetic-inductance TWPAs, we demonstrate approximately 20 dB of signal gain across nearly an octave of bandwidth, together with pump rejection below --20 dB and an average image rejection of approximately --15 dB over the operating band. These results establish balanced TWPAs as a practical approach to broadband parametric amplification, enabling improved contamination free bandwidth and eliminating the need for complex filtering.

  • 4 authors
·
Oct 15

Adaptive Frequency Filters As Efficient Global Token Mixers

Recent vision transformers, large-kernel CNNs and MLPs have attained remarkable successes in broad vision tasks thanks to their effective information fusion in the global scope. However, their efficient deployments, especially on mobile devices, still suffer from noteworthy challenges due to the heavy computational costs of self-attention mechanisms, large kernels, or fully connected layers. In this work, we apply conventional convolution theorem to deep learning for addressing this and reveal that adaptive frequency filters can serve as efficient global token mixers. With this insight, we propose Adaptive Frequency Filtering (AFF) token mixer. This neural operator transfers a latent representation to the frequency domain via a Fourier transform and performs semantic-adaptive frequency filtering via an elementwise multiplication, which mathematically equals to a token mixing operation in the original latent space with a dynamic convolution kernel as large as the spatial resolution of this latent representation. We take AFF token mixers as primary neural operators to build a lightweight neural network, dubbed AFFNet. Extensive experiments demonstrate the effectiveness of our proposed AFF token mixer and show that AFFNet achieve superior accuracy and efficiency trade-offs compared to other lightweight network designs on broad visual tasks, including visual recognition and dense prediction tasks.

  • 6 authors
·
Jul 26, 2023

I Can't Believe It's Not Real: CV-MuSeNet: Complex-Valued Multi-Signal Segmentation

The increasing congestion of the radio frequency spectrum presents challenges for efficient spectrum utilization. Cognitive radio systems enable dynamic spectrum access with the aid of recent innovations in neural networks. However, traditional real-valued neural networks (RVNNs) face difficulties in low signal-to-noise ratio (SNR) environments, as they were not specifically developed to capture essential wireless signal properties such as phase and amplitude. This work presents CMuSeNet, a complex-valued multi-signal segmentation network for wideband spectrum sensing, to address these limitations. Extensive hyperparameter analysis shows that a naive conversion of existing RVNNs into their complex-valued counterparts is ineffective. Built on complex-valued neural networks (CVNNs) with a residual architecture, CMuSeNet introduces a complexvalued Fourier spectrum focal loss (CFL) and a complex plane intersection over union (CIoU) similarity metric to enhance training performance. Extensive evaluations on synthetic, indoor overthe-air, and real-world datasets show that CMuSeNet achieves an average accuracy of 98.98%-99.90%, improving by up to 9.2 percentage points over its real-valued counterpart and consistently outperforms state of the art. Strikingly, CMuSeNet achieves the accuracy level of its RVNN counterpart in just two epochs, compared to the 27 epochs required for RVNN, while reducing training time by up to a 92.2% over the state of the art. The results highlight the effectiveness of complex-valued architectures in improving weak signal detection and training efficiency for spectrum sensing in challenging low-SNR environments. The dataset is available at: https://dx.doi.org/10.21227/hcc1-6p22

  • 2 authors
·
May 21, 2025

Dynamic Spectrum Mixer for Visual Recognition

Recently, MLP-based vision backbones have achieved promising performance in several visual recognition tasks. However, the existing MLP-based methods directly aggregate tokens with static weights, leaving the adaptability to different images untouched. Moreover, Recent research demonstrates that MLP-Transformer is great at creating long-range dependencies but ineffective at catching high frequencies that primarily transmit local information, which prevents it from applying to the downstream dense prediction tasks, such as semantic segmentation. To address these challenges, we propose a content-adaptive yet computationally efficient structure, dubbed Dynamic Spectrum Mixer (DSM). The DSM represents token interactions in the frequency domain by employing the Discrete Cosine Transform, which can learn long-term spatial dependencies with log-linear complexity. Furthermore, a dynamic spectrum weight generation layer is proposed as the spectrum bands selector, which could emphasize the informative frequency bands while diminishing others. To this end, the technique can efficiently learn detailed features from visual input that contains both high- and low-frequency information. Extensive experiments show that DSM is a powerful and adaptable backbone for a range of visual recognition tasks. Particularly, DSM outperforms previous transformer-based and MLP-based models, on image classification, object detection, and semantic segmentation tasks, such as 83.8 \% top-1 accuracy on ImageNet, and 49.9 \% mIoU on ADE20K.

  • 2 authors
·
Sep 13, 2023

Singing Voice Separation Using a Deep Convolutional Neural Network Trained by Ideal Binary Mask and Cross Entropy

Separating a singing voice from its music accompaniment remains an important challenge in the field of music information retrieval. We present a unique neural network approach inspired by a technique that has revolutionized the field of vision: pixel-wise image classification, which we combine with cross entropy loss and pretraining of the CNN as an autoencoder on singing voice spectrograms. The pixel-wise classification technique directly estimates the sound source label for each time-frequency (T-F) bin in our spectrogram image, thus eliminating common pre- and postprocessing tasks. The proposed network is trained by using the Ideal Binary Mask (IBM) as the target output label. The IBM identifies the dominant sound source in each T-F bin of the magnitude spectrogram of a mixture signal, by considering each T-F bin as a pixel with a multi-label (for each sound source). Cross entropy is used as the training objective, so as to minimize the average probability error between the target and predicted label for each pixel. By treating the singing voice separation problem as a pixel-wise classification task, we additionally eliminate one of the commonly used, yet not easy to comprehend, postprocessing steps: the Wiener filter postprocessing. The proposed CNN outperforms the first runner up in the Music Information Retrieval Evaluation eXchange (MIREX) 2016 and the winner of MIREX 2014 with a gain of 2.2702 ~ 5.9563 dB global normalized source to distortion ratio (GNSDR) when applied to the iKala dataset. An experiment with the DSD100 dataset on the full-tracks song evaluation task also shows that our model is able to compete with cutting-edge singing voice separation systems which use multi-channel modeling, data augmentation, and model blending.

  • 5 authors
·
Dec 4, 2018

FreqLite: A Lightweight Frequency-Decomposed Linear Model with Adaptive Reversible Normalization for Robust Long-Term Time-Series Forecasting

Long-term time-series forecasting needs models that are accurate yet efficient enough for commodity hardware. Lightweight linear forecasters are remarkably strong in this regime, yet they leave two openings: reversible instance normalization (RevIN) de-normalizes the entire horizon with a single lookback statistic, which is inaccurate under non-stationarity, and time-domain trend/seasonal decomposition relies on a fixed, non-adaptive filter. We present FreqLite, an ultra-lightweight, channel-independent frequency-decomposed linear forecaster: a learnable, lossless, partition-of-unity spectral filter splits the input into bands that are forecast by per-band linear heads and, unlike low-pass-truncation approaches, the high-frequency band is retained and modeled. FreqLite is the best lightweight model on the standard long-term forecasting benchmarks and, at long lookback (L=336), attains a lower average error than a PatchTST Transformer (0.3244 vs. 0.3587 MSE) while using 4x fewer parameters, 2.2x less memory, and 2.2x less time per epoch on a single 4 GB laptop GPU; although modest in magnitude, its improvements are statistically significant under paired Wilcoxon tests across all matched cells (p < 1e-5). We further introduce Adaptive Reversible Instance Normalization (A-RevIN), a regime-adaptive reversible normalization that strictly generalizes RevIN (recovered exactly when its gate is closed), engages under non-stationarity, and reduces to RevIN without harm on stationary data. We validate this on both a real strongly non-stationary dataset (ILI, up to ~5% MSE reduction) and a controlled synthetic drift sweep in which A-RevIN's benefit and its learned gate both rise monotonically with injected non-stationarity. Every component is independently ablatable (Linear and RLinear are special cases of FreqLite), and all results are reproducible on commodity hardware.

  • 2 authors
·
May 30

Where Does the Audio Jailbreak Live? A Controlled Frequency-Depth Audit of AdvWave-P on Qwen2-Audio

We audit frequency and decoder-depth claims for AdvWave-P, an additive audio jailbreak, on Qwen2-Audio. The protocol masks frequency components of the perturbation in the short-time Fourier transform (STFT) domain and measures attack success and audio-span representations. On 520 AdvBench prompts, the primary judge labels 76.7% of adversarial inputs as jailbreaks. A condition-blind, single-annotator validation yields a Rogan-Gladen sensitivity estimate of 0.87 for this condition (about 0.83-0.95 with validation-rate uncertainty); this correction is not applied to masked conditions. The apparent frequency ranking depends on the partition: energy share alone predicts the standard eight-band ranking (Spearman's rho = 0.95), and equal-Hz and equal-energy partitions show that masking any tested band can sharply reduce attack success. At a finer 16-band equal-energy resolution, however, masking the narrow 7520-7960 Hz band leaves ASR at 0.10, which remains unresolved without a matched control. Matched-energy scattered-removal tests show that contiguous removal is more damaging in lower bands, while both forms approach the floor in upper bands. Global rescaling leaves ASR near baseline but tests amplitude sensitivity rather than frequency location. In a re-optimization pilot (n = 20), tested single- and two-band supports reach ASRs of 0.00, 0.25, and 0.40, while random supports covering about half the STFT bins reach a mean of 0.86. In a prompt- and energy-adjusted model, audio-span divergence is associated with band necessity, with the coefficient rising from +0.63 at the projector output to +0.93 at layer 30 (contrast +0.293, 95% CI [0.11, 0.51]). This association is not a causal localization, and single-layer patching does not establish a causal layer. The results support partition-aware auditing of frequency claims, leaving the fine-resolution top-band result and broader generality open.

  • 7 authors
·
Oct 3

Frequency-aware Feature Fusion for Dense Image Prediction

Dense image prediction tasks demand features with strong category information and precise spatial boundary details at high resolution. To achieve this, modern hierarchical models often utilize feature fusion, directly adding upsampled coarse features from deep layers and high-resolution features from lower levels. In this paper, we observe rapid variations in fused feature values within objects, resulting in intra-category inconsistency due to disturbed high-frequency features. Additionally, blurred boundaries in fused features lack accurate high frequency, leading to boundary displacement. Building upon these observations, we propose Frequency-Aware Feature Fusion (FreqFusion), integrating an Adaptive Low-Pass Filter (ALPF) generator, an offset generator, and an Adaptive High-Pass Filter (AHPF) generator. The ALPF generator predicts spatially-variant low-pass filters to attenuate high-frequency components within objects, reducing intra-class inconsistency during upsampling. The offset generator refines large inconsistent features and thin boundaries by replacing inconsistent features with more consistent ones through resampling, while the AHPF generator enhances high-frequency detailed boundary information lost during downsampling. Comprehensive visualization and quantitative analysis demonstrate that FreqFusion effectively improves feature consistency and sharpens object boundaries. Extensive experiments across various dense prediction tasks confirm its effectiveness. The code is made publicly available at https://github.com/Linwei-Chen/FreqFusion.

  • 6 authors
·
Aug 23, 2024

More is Better in Modern Machine Learning: when Infinite Overparameterization is Optimal and Overfitting is Obligatory

In our era of enormous neural networks, empirical progress has been driven by the philosophy that more is better. Recent deep learning practice has found repeatedly that larger model size, more data, and more computation (resulting in lower training loss) improves performance. In this paper, we give theoretical backing to these empirical observations by showing that these three properties hold in random feature (RF) regression, a class of models equivalent to shallow networks with only the last layer trained. Concretely, we first show that the test risk of RF regression decreases monotonically with both the number of features and the number of samples, provided the ridge penalty is tuned optimally. In particular, this implies that infinite width RF architectures are preferable to those of any finite width. We then proceed to demonstrate that, for a large class of tasks characterized by powerlaw eigenstructure, training to near-zero training loss is obligatory: near-optimal performance can only be achieved when the training error is much smaller than the test error. Grounding our theory in real-world data, we find empirically that standard computer vision tasks with convolutional neural tangent kernels clearly fall into this class. Taken together, our results tell a simple, testable story of the benefits of overparameterization, overfitting, and more data in random feature models.

  • 4 authors
·
Nov 24, 2023

RF-GPT: Teaching AI to See the Wireless World

Large language models (LLMs) and multimodal models have become powerful general-purpose reasoning systems. However, radio-frequency (RF) signals, which underpin wireless systems, are still not natively supported by these models. Existing LLM-based approaches for telecom focus mainly on text and structured data, while conventional RF deep-learning models are built separately for specific signal-processing tasks, highlighting a clear gap between RF perception and high-level reasoning. To bridge this gap, we introduce RF-GPT, a radio-frequency language model (RFLM) that utilizes the visual encoders of multimodal LLMs to process and understand RF spectrograms. In this framework, complex in-phase/quadrature (IQ) waveforms are mapped to time-frequency spectrograms and then passed to pretrained visual encoders. The resulting representations are injected as RF tokens into a decoder-only LLM, which generates RF-grounded answers, explanations, and structured outputs. To train RF-GPT, we perform supervised instruction fine-tuning of a pretrained multimodal LLM using a fully synthetic RF corpus. Standards-compliant waveform generators produce wideband scenes for six wireless technologies, from which we derive time-frequency spectrograms, exact configuration metadata, and dense captions. A text-only LLM then converts these captions into RF-grounded instruction-answer pairs, yielding roughly 12,000 RF scenes and 0.625 million instruction examples without any manual labeling. Across benchmarks for wideband modulation classification, overlap analysis, wireless-technology recognition, WLAN user counting, and 5G NR information extraction, RF-GPT achieves strong multi-task performance, whereas general-purpose VLMs with no RF grounding largely fail.

  • 7 authors
·
Feb 15

Exploring Quality and Generalizability in Parameterized Neural Audio Effects

Deep neural networks have shown promise for music audio signal processing applications, often surpassing prior approaches, particularly as end-to-end models in the waveform domain. Yet results to date have tended to be constrained by low sample rates, noise, narrow domains of signal types, and/or lack of parameterized controls (i.e. "knobs"), making their suitability for professional audio engineering workflows still lacking. This work expands on prior research published on modeling nonlinear time-dependent signal processing effects associated with music production by means of a deep neural network, one which includes the ability to emulate the parameterized settings you would see on an analog piece of equipment, with the goal of eventually producing commercially viable, high quality audio, i.e. 44.1 kHz sampling rate at 16-bit resolution. The results in this paper highlight progress in modeling these effects through architecture and optimization changes, towards increasing computational efficiency, lowering signal-to-noise ratio, and extending to a larger variety of nonlinear audio effects. Toward these ends, the strategies employed involved a three-pronged approach: model speed, model accuracy, and model generalizability. Most of the presented methods provide marginal or no increase in output accuracy over the original model, with the exception of dataset manipulation. We found that limiting the audio content of the dataset, for example using datasets of just a single instrument, provided a significant improvement in model accuracy over models trained on more general datasets.

  • 2 authors
·
Jun 9, 2020

A Lightweight Instrument-Agnostic Model for Polyphonic Note Transcription and Multipitch Estimation

Automatic Music Transcription (AMT) has been recognized as a key enabling technology with a wide range of applications. Given the task's complexity, best results have typically been reported for systems focusing on specific settings, e.g. instrument-specific systems tend to yield improved results over instrument-agnostic methods. Similarly, higher accuracy can be obtained when only estimating frame-wise f_0 values and neglecting the harder note event detection. Despite their high accuracy, such specialized systems often cannot be deployed in the real-world. Storage and network constraints prohibit the use of multiple specialized models, while memory and run-time constraints limit their complexity. In this paper, we propose a lightweight neural network for musical instrument transcription, which supports polyphonic outputs and generalizes to a wide variety of instruments (including vocals). Our model is trained to jointly predict frame-wise onsets, multipitch and note activations, and we experimentally show that this multi-output structure improves the resulting frame-level note accuracy. Despite its simplicity, benchmark results show our system's note estimation to be substantially better than a comparable baseline, and its frame-level accuracy to be only marginally below those of specialized state-of-the-art AMT systems. With this work we hope to encourage the community to further investigate low-resource, instrument-agnostic AMT systems.

  • 5 authors
·
Mar 18, 2022

CNet: A Complex-Valued Deep Learning Framework with Wirtinger Autodifferentiation and FFT--Hadamard Convolution

CNet is a C++/CUDA framework for building deep complex-valued neural networks (CVNNs) and optimizing complex functions by gradient descent with Wirtinger derivatives. Complex models are underexplored yet natural where data is intrinsically complex -- RF/IQ communications, MRI k-space, radar/SAR, audio spectra -- and phase carries information real networks discard. CNet is physics-native: a network is a cascade of complex (often unitary) operations on an amplitude vector, and classification is a Born-rule measurement p_k = |z_k|^2/||z||^2 rather than a softmax over real logits. Its library of complex layers makes conv(x,k) = IFFT(FFT(x).FFT(k)) learnable via signal-processing primitives -- spectral-padding local kernels (Pad), the inverse DFT, a magnitude nonlinearity |z|^2 (CModulus2), holomorphic powers z^M (CPower), and mean pooling (MeanPool) -- with GPU kernels for every layer, a GPU true-Adam optimizer, and a reduced-memory inference mode. Three studies. (1) A fully complex FNet-style causal language model, built on a new O(N log N) causal Fourier mixer, matches a param-matched real-valued causal FNet on tiny-shakespeare in under half the steps. We introduce Born-rule attention: a content-based causal mixer whose weights are quantum-measurement probabilities |<Q_k,K_j>|^2 of one token against another -- the first attention mechanism built on the Born rule. With rotary position embeddings and per-token complex normalization, a fully complex Born-rule model reaches 1.52 nats/char on tiny-shakespeare, matching softmax attention and beating the Fourier mixer by 0.23. (2,3) Two bottleneck analyses -- radio-modulation classification (RML2016.10a) and the Fourier phase problem of coherent-diffraction imaging -- isolate where CVNNs need new operators. The complex machinery learns the correct structure; open problems are concrete and operator-level. Code: https://github.com/crasmarum/CNet

  • 1 authors
·
Oct 6

SONAR: Spectral-Contrastive Audio Residuals for Generalizable Deepfake Detection

Deepfake (DF) audio detectors still struggle to generalize to out of distribution inputs. A central reason is spectral bias, the tendency of neural networks to learn low-frequency structure before high-frequency (HF) details, which both causes DF generators to leave HF artifacts and leaves those same artifacts under-exploited by common detectors. To address this gap, we propose Spectral-cONtrastive Audio Residuals (SONAR), a frequency-guided framework that explicitly disentangles an audio signal into complementary representations. An XLSR encoder captures the dominant low-frequency content, while the same cloned path, preceded by learnable SRM, value-constrained high-pass filters, distills faint HF residuals. Frequency cross-attention reunites the two views for long- and short-range frequency dependencies, and a frequency-aware Jensen-Shannon contrastive loss pulls real content-noise pairs together while pushing fake embeddings apart, accelerating optimization and sharpening decision boundaries. Evaluated on the ASVspoof 2021 and in-the-wild benchmarks, SONAR attains state-of-the-art performance and converges four times faster than strong baselines. By elevating faint high-frequency residuals to first-class learning signals, SONAR unveils a fully data-driven, frequency-guided contrastive framework that splits the latent space into two disjoint manifolds: natural-HF for genuine audio and distorted-HF for synthetic audio, thereby sharpening decision boundaries. Because the scheme operates purely at the representation level, it is architecture-agnostic and, in future work, can be seamlessly integrated into any model or modality where subtle high-frequency cues are decisive.

  • 4 authors
·
Jul 18

Adaptive Fourier Neural Operators: Efficient Token Mixers for Transformers

Vision transformers have delivered tremendous success in representation learning. This is primarily due to effective token mixing through self attention. However, this scales quadratically with the number of pixels, which becomes infeasible for high-resolution inputs. To cope with this challenge, we propose Adaptive Fourier Neural Operator (AFNO) as an efficient token mixer that learns to mix in the Fourier domain. AFNO is based on a principled foundation of operator learning which allows us to frame token mixing as a continuous global convolution without any dependence on the input resolution. This principle was previously used to design FNO, which solves global convolution efficiently in the Fourier domain and has shown promise in learning challenging PDEs. To handle challenges in visual representation learning such as discontinuities in images and high resolution inputs, we propose principled architectural modifications to FNO which results in memory and computational efficiency. This includes imposing a block-diagonal structure on the channel mixing weights, adaptively sharing weights across tokens, and sparsifying the frequency modes via soft-thresholding and shrinkage. The resulting model is highly parallel with a quasi-linear complexity and has linear memory in the sequence size. AFNO outperforms self-attention mechanisms for few-shot segmentation in terms of both efficiency and accuracy. For Cityscapes segmentation with the Segformer-B3 backbone, AFNO can handle a sequence size of 65k and outperforms other efficient self-attention mechanisms.

  • 6 authors
·
Nov 24, 2021

LiVeAction: a Lightweight, Versatile, and Asymmetric Neural Codec Design for Real-time Operation

Modern sensors generate rich, high-fidelity data, yet applications operating on wearable or remote sensing devices remain constrained by bandwidth and power budgets. Standardized codecs such as JPEG and MPEG achieve efficient trade-offs between bitrate and perceptual quality but are designed for human perception, limiting their applicability to machine-perception tasks and non-traditional modalities such as spatial audio arrays, hyperspectral images, and 3D medical images. General-purpose compression schemes based on scalar quantization or resolution reduction are broadly applicable but fail to exploit inherent signal redundancies, resulting in suboptimal rate-distortion performance. Recent generative neural codecs, or tokenizers, model complex signal dependencies but are often over-parameterized, data-hungry, and modality-specific, making them impractical for resource-constrained environments. We introduce a Lightweight, Versatile, and Asymmetric neural codec architecture (LiVeAction), that addresses these limitations through two key ideas. (1) To reduce the complexity of the encoder to meet the resource constraints of the execution environments, we impose an FFT-like structure and reduce the overall size and depth of the neural-network-based analysis transform. (2) To allow arbitrary signal modalities and simplify training, we replace adversarial and perceptual losses with a variance-based rate penalty. Our design produces codecs that deliver superior rate-distortion performance compared to state-of-the-art generative tokenizers, while remaining practical for deployment on low-power sensors. We release our code, experiments, and python library at https://github.com/UT-SysML/liveaction .

  • 2 authors
·
May 6 2

Open-Set Vessel Re-Identification from Underwater Ship-Radiated Noise with a Raw-Waveform Selective-Kernel Acoustic Neural Network (SKANN) and a Cross-Passage Evaluation Protocol

Underwater acoustic target recognition has converged on closed-set classification by vessel type, a task that does not answer whether a monitoring system has heard this hull before. We formalise open-set, cross-passage vessel re-identification on public hydrophone data and specify a protocol that removes the two easiest routes to a high score: hull-disjoint splits keyed to MMSI/IMO, galleries and queries from disjoint passages of each hull, source-pure galleries, and an audio-adjudicated transit-deduplication gate. We describe SKANN, a raw-waveform encoder whose front end is a four-scale bank of learned filters fused by selective-kernel attention, trained with an angular-margin objective and an augmentation regime that perturbs recording chain, ambient noise and multipath while preserving the narrowband lines that carry identity. On a 40-hull IARA gallery (96 queries, 98 passage candidates), cross-passage rank-1 is 0.25 for the embedding and 0.26 for an automated narrowband-tonal comparator; the two are statistically indistinguishable at the top of the ranking, the embedding orders the rest of the list more reliably (AUC 0.82 vs 0.76), and their score fusion reaches rank-1 0.35 -- the only contrast that attains nominal significance, presented as evidence of partial complementarity, not as a recommendation. Transit deduplication alone removes a 16-21 point apparent rank-1 advantage, larger than any between-method difference. Two further findings delimit what public data can support: ShipsEar cannot separate hull identity from recording channel under an identity protocol, and cross-network fine-tuning helps vessels seen during fine-tuning but is a null result on unseen ones. The results support analyst triage over a ranked shortlist, not identification. Checkpoint, validation embeddings, transit map and per-query outputs are released under CC-BY-4.0 (doi:10.5281/zenodo.22160138).

  • 1 authors
·
Sep 6

Wideband Relative Transfer Function (RTF) Estimation Exploiting Frequency Correlations

This article focuses on estimating relative transfer functions (RTFs) for beamforming applications. Traditional methods often assume that spectra are uncorrelated, an assumption that is often violated in practical scenarios due to factors such as time-domain windowing or the non-stationary nature of signals, as observed in speech. To overcome these limitations, we propose an RTF estimation technique that leverages spectral and spatial correlations through subspace analysis. Additionally, we derive Cram\'er--Rao bounds (CRBs) for the RTF estimation task, providing theoretical insights into the achievable estimation accuracy. These bounds reveal that channel estimation can be performed more accurately if the noise or the target signal exhibits spectral correlations. Experiments with both real and synthetic data show that our technique outperforms the narrowband maximum-likelihood estimator, known as covariance whitening (CW), when the target exhibits spectral correlations. Although the proposed algorithm generally achieves accuracy close to the theoretical bound, there is potential for further improvement, especially in scenarios with highly spectrally correlated noise. While channel estimation has various applications, we demonstrate the method using a minimum variance distortionless (MVDR) beamformer for multichannel speech enhancement. A free Python implementation is also provided.

  • 3 authors
·
Jul 19, 2024

End-to-End Complex-Valued Multidilated Convolutional Neural Network for Joint Acoustic Echo Cancellation and Noise Suppression

Echo and noise suppression is an integral part of a full-duplex communication system. Many recent acoustic echo cancellation (AEC) systems rely on a separate adaptive filtering module for linear echo suppression and a neural module for residual echo suppression. However, not only do adaptive filtering modules require convergence and remain susceptible to changes in acoustic environments, but this two-stage framework also often introduces unnecessary delays to the AEC system when neural modules are already capable of both linear and nonlinear echo suppression. In this paper, we exploit the offset-compensating ability of complex time-frequency masks and propose an end-to-end complex-valued neural network architecture. The building block of the proposed model is a pseudocomplex extension based on the densely-connected multidilated DenseNet (D3Net) building block, resulting in a very small network of only 354K parameters. The architecture utilized the multi-resolution nature of the D3Net building blocks to eliminate the need for pooling, allowing the network to extract features using large receptive fields without any loss of output resolution. We also propose a dual-mask technique for joint echo and noise suppression with simultaneous speech enhancement. Evaluation on both synthetic and real test sets demonstrated promising results across multiple energy-based metrics and perceptual proxies.

  • 5 authors
·
Oct 2, 2021

FourierMoE: Fourier Mixture-of-Experts Adaptation of Large Language Models

Parameter-efficient fine-tuning (PEFT) has emerged as a crucial paradigm for adapting large language models (LLMs) under constrained computational budgets. However, standard PEFT methods often struggle in multi-task fine-tuning settings, where diverse optimization objectives induce task interference and limited parameter budgets lead to representational deficiency. While recent approaches incorporate mixture-of-experts (MoE) to alleviate these issues, they predominantly operate in the spatial domain, which may introduce structural redundancy and parameter overhead. To overcome these limitations, we reformulate adaptation in the spectral domain. Our spectral analysis reveals that different tasks exhibit distinct frequency energy distributions, and that LLM layers display heterogeneous frequency sensitivities. Motivated by these insights, we propose FourierMoE, which integrates the MoE architecture with the inverse discrete Fourier transform (IDFT) for frequency-aware adaptation. Specifically, FourierMoE employs a frequency-adaptive router to dispatch tokens to experts specialized in distinct frequency bands. Each expert learns a set of conjugate-symmetric complex coefficients, preserving complete phase and amplitude information while theoretically guaranteeing lossless IDFT reconstruction into real-valued spatial weights. Extensive evaluations across 28 benchmarks, multiple model architectures, and scales demonstrate that FourierMoE consistently outperforms competitive baselines in both single-task and multi-task settings while using significantly fewer trainable parameters. These results highlight the promise of spectral-domain expert adaptation as an effective and parameter-efficient paradigm for LLM fine-tuning.

  • 5 authors
·
Apr 1

MixPE: Quantization and Hardware Co-design for Efficient LLM Inference

Transformer-based large language models (LLMs) have achieved remarkable success as model sizes continue to grow, yet their deployment remains challenging due to significant computational and memory demands. Quantization has emerged as a promising solution, and state-of-the-art quantization algorithms for LLMs introduce the need for mixed-precision matrix multiplication (mpGEMM), where lower-precision weights are multiplied with higher-precision activations. Despite its benefits, current hardware accelerators such as GPUs and TPUs lack native support for efficient mpGEMM, leading to inefficient dequantization operations in the main sequential loop. To address this limitation, we introduce MixPE, a specialized mixed-precision processing element designed for efficient low-bit quantization in LLM inference. MixPE leverages two key innovations to minimize dequantization overhead and unlock the full potential of low-bit quantization. First, recognizing that scale and zero point are shared within each quantization group, we propose performing dequantization after per-group mpGEMM, significantly reducing dequantization overhead. Second, instead of relying on conventional multipliers, MixPE utilizes efficient shift\&add operations for multiplication, optimizing both computation and energy efficiency. Our experimental results demonstrate that MixPE surpasses the state-of-the-art quantization accelerators by 2.6times speedup and 1.4times energy reduction.

  • 7 authors
·
Nov 25, 2024

Diffusion Probabilistic Model Made Slim

Despite the recent visually-pleasing results achieved, the massive computational cost has been a long-standing flaw for diffusion probabilistic models (DPMs), which, in turn, greatly limits their applications on resource-limited platforms. Prior methods towards efficient DPM, however, have largely focused on accelerating the testing yet overlooked their huge complexity and sizes. In this paper, we make a dedicated attempt to lighten DPM while striving to preserve its favourable performance. We start by training a small-sized latent diffusion model (LDM) from scratch, but observe a significant fidelity drop in the synthetic images. Through a thorough assessment, we find that DPM is intrinsically biased against high-frequency generation, and learns to recover different frequency components at different time-steps. These properties make compact networks unable to represent frequency dynamics with accurate high-frequency estimation. Towards this end, we introduce a customized design for slim DPM, which we term as Spectral Diffusion (SD), for light-weight image synthesis. SD incorporates wavelet gating in its architecture to enable frequency dynamic feature extraction at every reverse steps, and conducts spectrum-aware distillation to promote high-frequency recovery by inverse weighting the objective based on spectrum magni tudes. Experimental results demonstrate that, SD achieves 8-18x computational complexity reduction as compared to the latent diffusion models on a series of conditional and unconditional image generation tasks while retaining competitive image fidelity.

  • 4 authors
·
Nov 27, 2022

Low-Interaction-Rank Learning: Unifying Multiplicative Dual-Encoder Heads

A multiplicative dual-encoder network computes a real-valued output for a pair of inputs as the inner product of their separate encodings. This architecture has been developed independently in operator learning, bipartite matching, contrastive vision-language models, retrieval, and other areas, yet no unified theory guides the basic design decisions: how many interaction modes to represent, how to normalize the encoders, and when the architecture should be avoided. We provide such a foundation by introducing the class of functions of low interaction rank, a class whose intrinsic complexity is measured by its interaction spectrum. Within this framework, approximation error decomposes into a spectral truncation term and an encoder-realization term; sample complexity is governed by the sum of the two encoder complexities rather than their product; and a usability criterion based on spectral decay determines when the architecture can succeed. The same framework exposes a central identifiability problem: the encoders are defined only up to a linear gauge symmetry that leaves the learned coordinates arbitrary. We show that normalization is gauge fixing and that whitening pins the interaction modes up to permutation and sign, thereby explaining the uninterpretability of contrastive dimensions and providing a constructive remedy. Experiments on synthetic kernels, operator learning, and CLIP models validate the theoretical predictions: spectral decay rates match the predicted scaling, whitening recovers the true modes, and independently trained CLIP models are related by a single rotation which, after removal by whitening, exposes interpretable concept axes. The code of this paper is provided at https://github.com/RS2002/Mul-Net .

  • 2 authors
·
Aug 11

SOFTS: Efficient Multivariate Time Series Forecasting with Series-Core Fusion

Multivariate time series forecasting plays a crucial role in various fields such as finance, traffic management, energy, and healthcare. Recent studies have highlighted the advantages of channel independence to resist distribution drift but neglect channel correlations, limiting further enhancements. Several methods utilize mechanisms like attention or mixer to address this by capturing channel correlations, but they either introduce excessive complexity or rely too heavily on the correlation to achieve satisfactory results under distribution drifts, particularly with a large number of channels. Addressing this gap, this paper presents an efficient MLP-based model, the Series-cOre Fused Time Series forecaster (SOFTS), which incorporates a novel STar Aggregate-Redistribute (STAR) module. Unlike traditional approaches that manage channel interactions through distributed structures, e.g., attention, STAR employs a centralized strategy to improve efficiency and reduce reliance on the quality of each channel. It aggregates all series to form a global core representation, which is then dispatched and fused with individual series representations to facilitate channel interactions effectively.SOFTS achieves superior performance over existing state-of-the-art methods with only linear complexity. The broad applicability of the STAR module across different forecasting models is also demonstrated empirically. For further research and development, we have made our code publicly available at https://github.com/Secilia-Cxy/SOFTS.

  • 4 authors
·
Apr 22, 2024

Frequency-Dynamic Attention Modulation for Dense Prediction

Vision Transformers (ViTs) have significantly advanced computer vision, demonstrating strong performance across various tasks. However, the attention mechanism in ViTs makes each layer function as a low-pass filter, and the stacked-layer architecture in existing transformers suffers from frequency vanishing. This leads to the loss of critical details and textures. We propose a novel, circuit-theory-inspired strategy called Frequency-Dynamic Attention Modulation (FDAM), which can be easily plugged into ViTs. FDAM directly modulates the overall frequency response of ViTs and consists of two techniques: Attention Inversion (AttInv) and Frequency Dynamic Scaling (FreqScale). Since circuit theory uses low-pass filters as fundamental elements, we introduce AttInv, a method that generates complementary high-pass filtering by inverting the low-pass filter in the attention matrix, and dynamically combining the two. We further design FreqScale to weight different frequency components for fine-grained adjustments to the target response function. Through feature similarity analysis and effective rank evaluation, we demonstrate that our approach avoids representation collapse, leading to consistent performance improvements across various models, including SegFormer, DeiT, and MaskDINO. These improvements are evident in tasks such as semantic segmentation, object detection, and instance segmentation. Additionally, we apply our method to remote sensing detection, achieving state-of-the-art results in single-scale settings. The code is available at https://github.com/Linwei-Chen/FDAM.

  • 3 authors
·
Oct 22, 2025

RF-Analyzer: Can Vision-Language Models Learn RF Understanding from Synthetic Data?

Understanding the wireless spectrum is a fundamen- tal requirement for intelligent communication systems, however, interpreting spectrograms requires extracting multiple physical attributes and reasoning about signal structure, which is a capability that is not achieved by traditional ML approaches. Recent advances in vision-language models (VLMs) demonstrated the possibility of learning such interpretation capabilities directly from data. This paper investigates whether VLMs can learn this capability from synthetic data alone, and more importantly, whether such learned representations generalize to real over-the- air RF environments. To address this question, we introduce RF-Analyzer, an SDR-to-AI analysis platform that integrates live spectrum captures associated with the corresponding VLM- based interpretation, enabling direct evaluation of VLMs outputs on live over-the-air signals. Using this platform, we assess a model trained exclusively on synthetic spectrogram data with general-purpose baselines. To enable systematic analysis, we establish a benchmark framework comprising three metrics, Physical Attribute Extraction Score (PAES), Prompt Leakage Rate (PLR), and hallucination count, to assess signal understanding and grounding. The obtained results demonstrate that VLMs trained on synthetic spectrogram data can generalize to real RF environments, particularly for extracting physical signal attributes such as spectral occupancy, temporal behavior, and SNR. This indicates that synthetic data is sufficient for learning transferable representations of RF signal structure. However, this generalization is limited due to the fact that synthetic training does not provide reliable semantic grounding without contextual priors. In particular, generalization breaks under conditions that are not covered in the synthetic distribution, particularly low-SNR regimes

  • 5 authors
·
May 5

How Powerful are Shallow Neural Networks with Bandlimited Random Weights?

We investigate the expressive power of depth-2 bandlimited random neural networks. A random net is a neural network where the hidden layer parameters are frozen with random assignment, and only the output layer parameters are trained by loss minimization. Using random weights for a hidden layer is an effective method to avoid non-convex optimization in standard gradient descent learning. It has also been adopted in recent deep learning theories. Despite the well-known fact that a neural network is a universal approximator, in this study, we mathematically show that when hidden parameters are distributed in a bounded domain, the network may not achieve zero approximation error. In particular, we derive a new nontrivial approximation error lower bound. The proof utilizes the technique of ridgelet analysis, a harmonic analysis method designed for neural networks. This method is inspired by fundamental principles in classical signal processing, specifically the idea that signals with limited bandwidth may not always be able to perfectly recreate the original signal. We corroborate our theoretical results with various simulation studies, and generally, two main take-home messages are offered: (i) Not any distribution for selecting random weights is feasible to build a universal approximator; (ii) A suitable assignment of random weights exists but to some degree is associated with the complexity of the target function.

  • 5 authors
·
Aug 19, 2020

Spatial Frequency Modulation for Semantic Segmentation

High spatial frequency information, including fine details like textures, significantly contributes to the accuracy of semantic segmentation. However, according to the Nyquist-Shannon Sampling Theorem, high-frequency components are vulnerable to aliasing or distortion when propagating through downsampling layers such as strided-convolution. Here, we propose a novel Spatial Frequency Modulation (SFM) that modulates high-frequency features to a lower frequency before downsampling and then demodulates them back during upsampling. Specifically, we implement modulation through adaptive resampling (ARS) and design a lightweight add-on that can densely sample the high-frequency areas to scale up the signal, thereby lowering its frequency in accordance with the Frequency Scaling Property. We also propose Multi-Scale Adaptive Upsampling (MSAU) to demodulate the modulated feature and recover high-frequency information through non-uniform upsampling This module further improves segmentation by explicitly exploiting information interaction between densely and sparsely resampled areas at multiple scales. Both modules can seamlessly integrate with various architectures, extending from convolutional neural networks to transformers. Feature visualization and analysis confirm that our method effectively alleviates aliasing while successfully retaining details after demodulation. Finally, we validate the broad applicability and effectiveness of SFM by extending it to image classification, adversarial robustness, instance segmentation, and panoptic segmentation tasks. The code is available at https://github.com/Linwei-Chen/SFM.

  • 5 authors
·
Jul 16, 2025

FaSNet: Low-latency Adaptive Beamforming for Multi-microphone Audio Processing

Beamforming has been extensively investigated for multi-channel audio processing tasks. Recently, learning-based beamforming methods, sometimes called neural beamformers, have achieved significant improvements in both signal quality (e.g. signal-to-noise ratio (SNR)) and speech recognition (e.g. word error rate (WER)). Such systems are generally non-causal and require a large context for robust estimation of inter-channel features, which is impractical in applications requiring low-latency responses. In this paper, we propose filter-and-sum network (FaSNet), a time-domain, filter-based beamforming approach suitable for low-latency scenarios. FaSNet has a two-stage system design that first learns frame-level time-domain adaptive beamforming filters for a selected reference channel, and then calculate the filters for all remaining channels. The filtered outputs at all channels are summed to generate the final output. Experiments show that despite its small model size, FaSNet is able to outperform several traditional oracle beamformers with respect to scale-invariant signal-to-noise ratio (SI-SNR) in reverberant speech enhancement and separation tasks. Moreover, when trained with a frequency-domain objective function on the CHiME-3 dataset, FaSNet achieves 14.3\% relative word error rate reduction (RWERR) compared with the baseline model. These results show the efficacy of FaSNet particularly in reverberant and noisy signal conditions.

  • 5 authors
·
Sep 30, 2019

Towards High-Quality and Efficient Speech Bandwidth Extension with Parallel Amplitude and Phase Prediction

Speech bandwidth extension (BWE) refers to widening the frequency bandwidth range of speech signals, enhancing the speech quality towards brighter and fuller. This paper proposes a generative adversarial network (GAN) based BWE model with parallel prediction of Amplitude and Phase spectra, named AP-BWE, which achieves both high-quality and efficient wideband speech waveform generation. The proposed AP-BWE generator is entirely based on convolutional neural networks (CNNs). It features a dual-stream architecture with mutual interaction, where the amplitude stream and the phase stream communicate with each other and respectively extend the high-frequency components from the input narrowband amplitude and phase spectra. To improve the naturalness of the extended speech signals, we employ a multi-period discriminator at the waveform level and design a pair of multi-resolution amplitude and phase discriminators at the spectral level, respectively. Experimental results demonstrate that our proposed AP-BWE achieves state-of-the-art performance in terms of speech quality for BWE tasks targeting sampling rates of both 16 kHz and 48 kHz. In terms of generation efficiency, due to the all-convolutional architecture and all-frame-level operations, the proposed AP-BWE can generate 48 kHz waveform samples 292.3 times faster than real-time on a single RTX 4090 GPU and 18.1 times faster than real-time on a single CPU. Notably, to our knowledge, AP-BWE is the first to achieve the direct extension of the high-frequency phase spectrum, which is beneficial for improving the effectiveness of existing BWE methods.

  • 4 authors
·
Jan 12, 2024

AlphaQ: Calibration-Free Bit Allocation for Mixture-of-Experts Quantization

Mixture-of-Experts (MoE) architectures scale model capacity through sparse expert activation, but their deployment remains memory-bound because all expert weights must reside in memory. Mixed-precision quantization can substantially reduce this footprint by assigning different bit-widths to different experts. Existing approaches, however, typically rely on calibration data to estimate expert importance and determine bit allocation. For frontier MoE LLMs, the original training data, and hence the true training distribution, is proprietary and inaccessible. As a result, calibration sets are inevitably imperfect surrogates, and this can misestimate expert utilization and lead to suboptimal bit allocation. Motivated by the substantial cross-expert quality variability observed in modern MoE models, and by the success of Heavy-Tailed Self-Regularization (HT-SR) theory at predicting neural network model quality without access to training or testing data, we propose AlphaQ, a calibration-free bit-allocation method for MoE quantization. AlphaQ draws on HT-SR theory and follows a simple principle: experts with more heavy-tailed weight spectra are typically better trained and hence should receive higher bit-widths, while experts with weaker heavy-tailed structure can be quantized more aggressively. AlphaQ operationalizes this principle by measuring expert-wise spectral heavy-tailedness and solving a budget-constrained optimization problem that minimizes total quantization error under a global bit-budget constraint. Across several MoE models, AlphaQ consistently outperforms calibration-based baselines under matched bit budgets. Notably, on Qwen1.5-MoE, AlphaQ achieves near full-precision accuracy with an average expert precision of only 3.5 bits, while delivering more than 4times memory compression. Our code is available at https://github.com/Superone77/AlphaQ.

  • 7 authors
·
Jun 2

Intriguing Findings of Frequency Selection for Image Deblurring

Blur was naturally analyzed in the frequency domain, by estimating the latent sharp image and the blur kernel given a blurry image. Recent progress on image deblurring always designs end-to-end architectures and aims at learning the difference between blurry and sharp image pairs from pixel-level, which inevitably overlooks the importance of blur kernels. This paper reveals an intriguing phenomenon that simply applying ReLU operation on the frequency domain of a blur image followed by inverse Fourier transform, i.e., frequency selection, provides faithful information about the blur pattern (e.g., the blur direction and blur level, implicitly shows the kernel pattern). Based on this observation, we attempt to leverage kernel-level information for image deblurring networks by inserting Fourier transform, ReLU operation, and inverse Fourier transform to the standard ResBlock. 1x1 convolution is further added to let the network modulate flexible thresholds for frequency selection. We term our newly built block as Res FFT-ReLU Block, which takes advantages of both kernel-level and pixel-level features via learning frequency-spatial dual-domain representations. Extensive experiments are conducted to acquire a thorough analysis on the insights of the method. Moreover, after plugging the proposed block into NAFNet, we can achieve 33.85 dB in PSNR on GoPro dataset. Our method noticeably improves backbone architectures without introducing many parameters, while maintaining low computational complexity. Code is available at https://github.com/DeepMed-Lab/DeepRFT-AAAI2023.

  • 6 authors
·
Nov 28, 2022

Correcting Neural Operator Spectral Bias via Diffusion Posterior Sampling with Sparse Observations

Neural operator surrogates (NO) approximate PDE solutions orders of magnitude faster than numerical solvers, but suffer from spectral bias: high-frequency content is systematically attenuated, limiting reliability where fine-scale structure matters. Sparse sensor measurements of the field are often available too, offering pointwise accuracy without spectral distortion but covering only a small fraction of the domain. We address this by treating NO predictions as auxiliary observations in a diffusion posterior sampling framework. Our method, FreqNO-DPS (https://github.com/niccoloperrone/FreqNO-DPS), combines an unconditional score-based diffusion prior, trained on high-fidelity simulations, with diffusion posterior sampling (DPS) conditioned on sparse observations and guided by a frozen neural operator. Naive integration reintroduces the surrogate's spectral bias; we resolve this with a closed-form, spectrally shaped guidance score that weights the surrogate by its frequency-dependent accuracy and needs no denoiser backpropagation. A distribution-free analysis bounds the approximation error across the frequency-diffusion-time plane and shows the guidance's frequency dependence is preserved regardless of distributional assumptions. On 3D elastic wavefield prediction at 5% and 2% sensor coverage, the method reaches near-zero spectral bias across all bands, where both the surrogate and sensor-only DPS show systematic high-frequency attenuation. Isotropic guidance, the natural baseline, improves pointwise accuracy but carries the bias into the posterior nearly intact, confirming that frequency-dependent calibration is essential, not merely beneficial. The framework needs only paired surrogate/reference data and exploits no problem-specific structure beyond the residual's approximate spectral diagonality, verifiable for new surrogates via the coherence diagnostic we provide.

  • 4 authors
·
Jun 1

Eigenspectrum Analysis of Neural Networks without Aspect Ratio Bias

Diagnosing deep neural networks (DNNs) through the eigenspectrum of weight matrices has been an active area of research in recent years. At a high level, eigenspectrum analysis of DNNs involves measuring the heavytailness of the empirical spectral densities (ESD) of weight matrices. It provides insight into how well a model is trained and can guide decisions on assigning better layer-wise training hyperparameters. In this paper, we address a challenge associated with such eigenspectrum methods: the impact of the aspect ratio of weight matrices on estimated heavytailness metrics. We demonstrate that matrices of varying sizes (and aspect ratios) introduce a non-negligible bias in estimating heavytailness metrics, leading to inaccurate model diagnosis and layer-wise hyperparameter assignment. To overcome this challenge, we propose FARMS (Fixed-Aspect-Ratio Matrix Subsampling), a method that normalizes the weight matrices by subsampling submatrices with a fixed aspect ratio. Instead of measuring the heavytailness of the original ESD, we measure the average ESD of these subsampled submatrices. We show that measuring the heavytailness of these submatrices with the fixed aspect ratio can effectively mitigate the aspect ratio bias. We validate our approach across various optimization techniques and application domains that involve eigenspectrum analysis of weights, including image classification in computer vision (CV) models, scientific machine learning (SciML) model training, and large language model (LLM) pruning. Our results show that despite its simplicity, FARMS uniformly improves the accuracy of eigenspectrum analysis while enabling more effective layer-wise hyperparameter assignment in these application domains. In one of the LLM pruning experiments, FARMS reduces the perplexity of the LLaMA-7B model by 17.3% when compared with the state-of-the-art method.

  • 4 authors
·
Jun 6, 2025

Show the Signal, Hide the Noise: Spectral Forcing for Pixel-Space Diffusion

Pixel-space diffusion models are trained on full-bandwidth noisy images, yet the useful signal available to the denoiser is strongly frequency dependent. Under rectified-flow diffusion and natural-image power-law spectra, the per-band data-to-noise contour k^{*}(t) = (1-t)^{-2/α} separates a signal-bearing low-frequency region from a noise-dominated high-frequency region at each time t. We show that this implicit coarse-to-fine structure is not merely descriptive: it induces a capacity-allocation problem. A standard pixel-space denoiser must discover the moving bandwidth boundary internally and can spend computation on frequency-time regions where the optimal prediction collapses to deterministic baselines rather than data-distribution modeling. To make this boundary explicit, we introduce Spectral Forcing, a parameter-free, time-conditional 2D-DCT low-pass operator applied to the noisy input before the patch embedder. Its cutoff expands monotonically with the diffusion time and becomes the identity at the data endpoint. Through controlled synthetic experiments, we identify the regime in which the operator is beneficial: coarse patch tokenization and data whose high-frequency content is predominantly noise rather than essential signal. On ImageNet-256 with JiT-700M/32, Spectral Forcing consistently improves both FID and Inception Score across different training epochs, demonstrating robust gains throughout training; at finer tokenization, the spectral forcing is still competitive. We further insert the unchanged operator into SenseNova-U1, a unified text-to-image model, where it improves DPG-Bench and GenEval, showing that the input-side spectral prior transfers beyond class-conditional generation. These results suggest a route to capacity-efficient pixel-space diffusion by showing the signal and hiding the noise.

mmlab-ntu MMLab@NTU
·
Jun 15 3

DeFTAN-II: Efficient Multichannel Speech Enhancement with Subgroup Processing

In this work, we present DeFTAN-II, an efficient multichannel speech enhancement model based on transformer architecture and subgroup processing. Despite the success of transformers in speech enhancement, they face challenges in capturing local relations, reducing the high computational complexity, and lowering memory usage. To address these limitations, we introduce subgroup processing in our model, combining subgroups of locally emphasized features with other subgroups containing original features. The subgroup processing is implemented in several blocks of the proposed network. In the proposed split dense blocks extracting spatial features, a pair of subgroups is sequentially concatenated and processed by convolution layers to effectively reduce the computational complexity and memory usage. For the F- and T-transformers extracting temporal and spectral relations, we introduce cross-attention between subgroups to identify relationships between locally emphasized and non-emphasized features. The dual-path feedforward network then aggregates attended features in terms of the gating of local features processed by dilated convolutions. Through extensive comparisons with state-of-the-art multichannel speech enhancement models, we demonstrate that DeFTAN-II with subgroup processing outperforms existing methods at significantly lower computational complexity. Moreover, we evaluate the model's generalization capability on real-world data without fine-tuning, which further demonstrates its effectiveness in practical scenarios.

  • 2 authors
·
Aug 30, 2023

Spectral-Aware Analytic Class-Incremental Learning for Long-Tailed Distributions

Analytic Continual Learning (ACL) offers a computationally efficient alternative to gradient-based approaches. Recent ACL methods are based on Recursive Least Squares (RLS) and have achieved the state-of-the-art results compared to other alternatives. However, they falter significantly in Class-Incremental Learning scenarios characterized by Long-Tailed distributions. While the ill-conditioning of the autocorrelation (Gram) matrix is a known limitation of RLS, we demonstrate that class imbalance exacerbates this issue into a distinct spectral pathology: "tail" classes suffer from severe spectral collapse, rendering their subspaces numerically indistinguishable from noise. Standard Ridge Regression (L_2) fails to address this effectively as it applies isotropic regularization - a uniform penalty that is insufficient to stabilize the tail without over-shrinking the head. To address this, we propose Geometry-Spectral Rectification (GSR), a theoretically grounded framework that treats long-tailed learning as a spectral regularization problem. Unlike standard isotropic regularization (Ridge) which uniformly penalizes all eigenvalues, GSR acts as an anisotropic spectral filter, selectively inflating the collapsed eigenvalues of tail classes. We construct a structured, data-dependent spectral perturbation matrix Δ that selectively inflates collapsed tail eigen-directions of the Gram matrix. Theoretical analysis proves that GSR guarantees an improved stable rank for the Gram matrix, ensuring numerical stability. Extensive experiments show that GSR establishes a new state-of-the-art for analytic CIL, offering a superior trade-off between computational efficiency and robust generalization in long-tailed settings.

  • 7 authors
·
Jul 23

NeuRBF: A Neural Fields Representation with Adaptive Radial Basis Functions

We present a novel type of neural fields that uses general radial bases for signal representation. State-of-the-art neural fields typically rely on grid-based representations for storing local neural features and N-dimensional linear kernels for interpolating features at continuous query points. The spatial positions of their neural features are fixed on grid nodes and cannot well adapt to target signals. Our method instead builds upon general radial bases with flexible kernel position and shape, which have higher spatial adaptivity and can more closely fit target signals. To further improve the channel-wise capacity of radial basis functions, we propose to compose them with multi-frequency sinusoid functions. This technique extends a radial basis to multiple Fourier radial bases of different frequency bands without requiring extra parameters, facilitating the representation of details. Moreover, by marrying adaptive radial bases with grid-based ones, our hybrid combination inherits both adaptivity and interpolation smoothness. We carefully designed weighting schemes to let radial bases adapt to different types of signals effectively. Our experiments on 2D image and 3D signed distance field representation demonstrate the higher accuracy and compactness of our method than prior arts. When applied to neural radiance field reconstruction, our method achieves state-of-the-art rendering quality, with small model size and comparable training speed.

  • 7 authors
·
Sep 27, 2023 2